Manufacturing · Bristol, RI

Tri-Mack Plastics Manufacturing CORP.

According to OSHA enforcement records (2010–2026), Tri-Mack Plastics Manufacturing CORP. has a concerning safety record: 10 violations across 3 inspections. See the full breakdown below.

Top 25% by penalty70% serious
$24,160
OSHA penalties
10
Violations cited
3
OSHA inspections
#13,992
of 100,495 penalized employers

Tri-Mack Plastics Manufacturing CORP. in Bristol, RI has been the subject of 3 OSHA workplace inspections and 10 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $24,160. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tri-Mack Plastics Manufacturing CORP. 3 times over 3 years, roughly annually. These inspections resulted in 10 violations, averaging 3.3 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Tonoga INC. in Petersburgh, NY is another manufacturing employer with 3 OSHA inspections on record and $24,154 in current penalties.

3.3
violations per inspection
70.0%
of violations were serious
86%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tri-Mack Plastics Manufacturing CORP. runs moderately above peers (1.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$24,160 Bottom 14% least affordable more affordable than 14% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Tri-Mack Plastics Manufacturing CORP.

The federal enforcement record for Tri-Mack Plastics Manufacturing CORP. in Bristol, RI includes 3 OSHA inspections and 10 violations, translating to 3.33 violations per inspection. Of those violations, 7 (70.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $34,512 in initial penalties against this employer, later adjusted to a current total of $24,160 - a 30.0% reduction. Average penalty per inspection works out to $8,053. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately above peers (1.6x the sector average).

Inspection activity spans from 2023-08-10 to 2026-03-12, a window of roughly 3 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2023-08-10

Last Inspection

2026-03-12

Inspection Span

3 yrs

Violations / Inspection

3.3

Avg Penalty / Inspection

$8,053

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 3 years, averaging 3.3 violations per visit. That's $8,053 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

7

Serious

70.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

30.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$34,512

Current Penalty Amount

$24,160

Penalty Reduction

30.0%

What this shows Penalties were reduced by $10,352 from the initial assessment of $34,512. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tri-Mack Plastics Manufacturing CORP. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Tri-Mack Plastics Manufacturing CORP. Industry Avg
Inspections 3 2.5
Violations 10 7.8
Total Penalty $24,160 $15,410
Avg Penalty per Inspection $8,053 $6,092

Nearby & Similar Employers in Manufacturing

Compare Tri-Mack Plastics Manufacturing CORP. vs Tom Richards, INC. side-by-side →

Frequently Asked Questions

Is Tri-Mack Plastics Manufacturing CORP. safe to work at?
Based on OSHA records, Tri-Mack Plastics Manufacturing CORP.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 10 violations across 3 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tri-Mack Plastics Manufacturing CORP. have?
Tri-Mack Plastics Manufacturing CORP. has 10 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $24,160.
How many OSHA inspections has Tri-Mack Plastics Manufacturing CORP. had?
Tri-Mack Plastics Manufacturing CORP. has had 3 OSHA inspections, with the first recorded on 2023-08-10 and the most recent on 2026-03-12. This averages 3.3 violations per inspection.
What is the total penalty amount for Tri-Mack Plastics Manufacturing CORP.?
Tri-Mack Plastics Manufacturing CORP. has been assessed $24,160 in current OSHA penalties, reduced from an initial assessment of $34,512 (a 30.0% reduction).
Does Tri-Mack Plastics Manufacturing CORP. have any serious or willful violations?
Yes. Tri-Mack Plastics Manufacturing CORP. has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tri-Mack Plastics Manufacturing CORP. operate in?
Tri-Mack Plastics Manufacturing CORP. operates in the Manufacturing sector (NAICS code 326199). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Tri-Mack Plastics Manufacturing CORP.'s safety record compare to industry average?
Tri-Mack Plastics Manufacturing CORP.'s total OSHA penalty of $24,160 is above the Manufacturing industry average of $15,410 per employer (1.6x the average). The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Tonoga INC. in Petersburgh, NY is a similar manufacturing employer with $24,154 in current penalties.

Explore PlainWorker

What to check next

Tri-Mack Plastics Manufacturing CORP.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.