PlainWorker
Employers › WA

Manufacturing · Lacey, WA

Tops Solid Surface CO

According to OSHA enforcement records (2010–2026), Tops Solid Surface CO has a mixed safety record: 5 violations across 3 inspections. See the full breakdown below.

Lower half by penalty20% serious
$100
OSHA penalties
5
Violations cited
3
OSHA inspections
#100,352
of 100,495 penalized employers

Tops Solid Surface CO in Lacey, WA has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tops Solid Surface CO 3 times over 4 years, roughly once every couple of years. These inspections resulted in 5 violations, averaging 1.7 per inspection. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Michael P Alger in Willamina, OR is another manufacturing employer with 2 OSHA inspections on record and $100 in current penalties.

1.7
violations per inspection
20.0%
of violations were serious
0%
of penalized employers rank lower

How Tops Solid Surface CO compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tops Solid Surface CO runs well below peers (0.01x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$100 Top 1% most affordable more affordable than 100% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Tops Solid Surface CO

The federal enforcement record for Tops Solid Surface CO in Lacey, WA includes 3 OSHA inspections and 5 violations, translating to 1.67 violations per inspection. Of those violations, 1 (20.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $100 in initial penalties against this employer, later adjusted to a current total of $100 - no reduction from the original assessment. Average penalty per inspection works out to $33. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.01x the sector average).

Inspection activity spans from 2010-11-29 to 2015-01-05, a window of roughly 4 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-11-29

Last Inspection

2015-01-05

Inspection Span

4 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$33

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 4 years, averaging 1.7 violations per visit. That's $33 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

1

Serious

20.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

80.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$100

Current Penalty Amount

$100

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Tops Solid Surface CO compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Tops Solid Surface CO Industry Avg
Inspections 3 2.5
Violations 5 7.8
Total Penalty $100 $15,410
Avg Penalty per Inspection $33 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Michael P Alger
Willamina, OR
2 inspections $100
William E Stovall
Klamath Falls, OR
3 inspections $100
Altman Printing Company INC
Spartanburg, SC
2 inspections $100
Sew of Oregon INC
Prineville, OR
2 inspections $100
Fab Tek Metal Processing INC
Eugene, OR
4 inspections $100

Compare Tops Solid Surface CO vs Michael P Alger side-by-side →

Frequently Asked Questions

Is Tops Solid Surface CO safe to work at? ▼
Based on OSHA records, Tops Solid Surface CO's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tops Solid Surface CO have? ▼
Tops Solid Surface CO has 5 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $100.
How many OSHA inspections has Tops Solid Surface CO had? ▼
Tops Solid Surface CO has had 3 OSHA inspections, with the first recorded on 2010-11-29 and the most recent on 2015-01-05. This averages 1.7 violations per inspection.
What is the total penalty amount for Tops Solid Surface CO? ▼
Tops Solid Surface CO has been assessed $100 in current OSHA penalties.
Does Tops Solid Surface CO have any serious or willful violations? ▼
Yes. Tops Solid Surface CO has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tops Solid Surface CO operate in? ▼
Tops Solid Surface CO operates in the Manufacturing sector (NAICS code 327991). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Tops Solid Surface CO's safety record compare to industry average? ▼
Tops Solid Surface CO's total OSHA penalty of $100 is below the Manufacturing industry average of $15,410 per employer. The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Michael P Alger in Willamina, OR is a similar manufacturing employer with $100 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in WA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Tops Solid Surface CO's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.