Construction · Detroit, MI

Tooles Contracting Group LLC

According to OSHA enforcement records (2010–2026), Tooles Contracting Group LLC has a concerning safety record: 16 violations across 4 inspections. See the full breakdown below.

Lower half by penalty69% serious
$5,740
OSHA penalties
16
Violations cited
4
OSHA inspections
#51,875
of 100,495 penalized employers

Tooles Contracting Group LLC in Detroit, MI has been the subject of 4 OSHA workplace inspections and 16 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,740. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tooles Contracting Group LLC 4 times over 4 years, roughly annually. These inspections resulted in 16 violations, averaging 4.0 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 11 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this runs moderately above peers (2.0x the sector average) on inspection frequency. For comparison, Elite Spray Foam and Roofing, LLC in Las Vegas, NV is another construction employer with 2 OSHA inspections on record and $5,740 in current penalties.

4.0
violations per inspection
68.8%
of violations were serious
48%
of penalized employers rank lower

How Tooles Contracting Group LLC compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows Tooles Contracting Group LLC sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,740 Top 48% most affordable more affordable than 52% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). This entry sits in this band. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Tooles Contracting Group LLC

The federal enforcement record for Tooles Contracting Group LLC in Detroit, MI includes 4 OSHA inspections and 16 violations, translating to 4.00 violations per inspection. Of those violations, 11 (68.8%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $8,750 in initial penalties against this employer, later adjusted to a current total of $5,740 - a 34.4% reduction. Average penalty per inspection works out to $1,435. Against the Construction industry average of $6,751 per employer, this record sits roughly in line with peers (0.9x the sector average).

Inspection activity spans from 2015-06-23 to 2019-07-03, a window of roughly 4 years.

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2015-06-23

Last Inspection

2019-07-03

Inspection Span

4 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$1,435

Industry Avg / Inspection

$3,361

What this shows 4 inspections over 4 years, averaging 4.0 violations per visit. That's $1,435 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

11

Serious

68.8% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

31.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,750

Current Penalty Amount

$5,740

Penalty Reduction

34.4%

What this shows Penalties were reduced by $3,010 from the initial assessment of $8,750. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Construction

How Tooles Contracting Group LLC compares to the Construction sector, which has 61,413 employers tracked by PlainWorker.

Metric Tooles Contracting Group LLC Industry Avg
Inspections 4 2.0
Violations 16 3.3
Total Penalty $5,740 $6,751
Avg Penalty per Inspection $1,435 $3,361

Nearby & Similar Employers in Construction

Compare Tooles Contracting Group LLC vs Vergith Contracting Company side-by-side →

Frequently Asked Questions

Is Tooles Contracting Group LLC safe to work at?
Based on OSHA records, Tooles Contracting Group LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 16 violations across 4 inspections, including 11 serious violations. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tooles Contracting Group LLC have?
Tooles Contracting Group LLC has 16 OSHA violations on record, including 11 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,740.
How many OSHA inspections has Tooles Contracting Group LLC had?
Tooles Contracting Group LLC has had 4 OSHA inspections, with the first recorded on 2015-06-23 and the most recent on 2019-07-03. This averages 4.0 violations per inspection.
What is the total penalty amount for Tooles Contracting Group LLC?
Tooles Contracting Group LLC has been assessed $5,740 in current OSHA penalties, reduced from an initial assessment of $8,750 (a 34.4% reduction).
Does Tooles Contracting Group LLC have any serious or willful violations?
Yes. Tooles Contracting Group LLC has 11 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tooles Contracting Group LLC operate in?
Tooles Contracting Group LLC operates in the Construction sector (NAICS code 236220). This industry has 61,413 employers tracked by PlainWorker, with 123,350 total OSHA inspections and $414.57M in cumulative penalties.
How does Tooles Contracting Group LLC's safety record compare to industry average?
Tooles Contracting Group LLC's total OSHA penalty of $5,740 is below the Construction industry average of $6,751 per employer. The employer has 4 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Elite Spray Foam and Roofing, LLC in Las Vegas, NV is a similar construction employer with $5,740 in current penalties.

Explore PlainWorker

What to check next

Tooles Contracting Group LLC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.