PlainWorker
Employers › FL

Manufacturing · Eustis, FL

Tool World, INC.

According to OSHA enforcement records (2010–2026), Tool World, INC. ranks #20,945 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 27 violations across 3 inspections.

Top 25% by penalty67% serious
$17,101
OSHA penalties
27
Violations cited
3
OSHA inspections
#20,945
of 99,447 penalized employers

Tool World, INC. in Eustis, FL has been the subject of 3 OSHA workplace inspections and 27 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $17,101. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tool World, INC. 3 times across a longer 11-year span, an infrequent cadence. These inspections resulted in 27 violations, averaging 9.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #20,945 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 18 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, SNO Bandit in Rutland, MA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

9.0
violations per inspection
66.7%
of violations were serious
#20,945
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 27 violations across 3 OSHA inspections (9.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Tool World, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tool World, INC. sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$17,101 Bottom 21% least affordable more affordable than 21% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tool World, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.519.83958.377.5OSHA inspectionsViolations citedBRIDGFORD FOOD PROCE…, OSHA inspections: 3 · Violations cited: 74PRIMUS MARBLE INC., OSHA inspections: 3 · Violations cited: 24SANCO, INC., OSHA inspections: 3 · Violations cited: 23R. LANG COMPANY, INC., OSHA inspections: 3 · Violations cited: 10SUJA LIFE, LLC, OSHA inspections: 3 · Violations cited: 15LEGION INDUSTRIES, I…, OSHA inspections: 3 · Violations cited: 59PRECISION PULLEY AND…, OSHA inspections: 3 · Violations cited: 4BAE SYSTEMS, SAN FRA…, OSHA inspections: 3 · Violations cited: 5Chicago Printing & E…, OSHA inspections: 3 · Violations cited: 6NATIONAL BEEF PACKIN…, OSHA inspections: 3 · Violations cited: 9LIFT SYSTEMS, INC., OSHA inspections: 3 · Violations cited: 17GLANBIA NUTRITIONALS…, OSHA inspections: 3 · Violations cited: 6PROPORTION FOODS, LLC., OSHA inspections: 3 · Violations cited: 5Troy Design and Manu…, OSHA inspections: 3 · Violations cited: 4USA PORK PACKERS INC, OSHA inspections: 3 · Violations cited: 10OHIO ALUMINUM INDUST…, OSHA inspections: 3 · Violations cited: 6CELLOFOAM NORTH AMER…, OSHA inspections: 3 · Violations cited: 15JOHN BOOS & COMPANY, OSHA inspections: 3 · Violations cited: 7MCCAIN FOODS USA, INC., OSHA inspections: 3 · Violations cited: 4TONOGA INC., OSHA inspections: 3 · Violations cited: 19Tool World, INC., OSHA inspections: 3 · Violations cited: 27
Tool World, INC. has 3 OSHA inspections on record and 27 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tool World, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Tool World, INC. is the #9,995 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($17,101).

How Tool World, INC. Compares

Tool World, INC.'s 9.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-05-17

Last Inspection

2023-02-16

Inspection Span

11 yrs

Violations / Inspection

9.0

Avg Penalty / Inspection

$5,700

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 11 years, averaging 9.0 violations per visit. That's $5,700 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

18

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

9

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$28,501

Current Penalty Amount

$17,101

Penalty Reduction

40.0%

What this shows Penalties were reduced by $11,400 from the initial assessment of $28,501. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tool World, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Tool World, INC. Industry Avg
Inspections 3 2.6
Violations 27 8.0
Total Penalty $17,101 $15,763
Avg Penalty per Inspection $5,700 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tool World, INC., both outside FL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($17,101 here).

Beckwith Lumber Company $17,100 WV Performance Springs Incorporated $17,100 MI Barber Steel Foundry CORP $17,100 MI Cape May County Municipal Utilities Authority Sludge Composting Facility $17,100 NJ

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Bridgford Food Processing of Texas LP 3 insp. Dallas, TX Primus Marble INC. 3 insp. Pacoima, CA Sanco, INC. 3 insp. Dalton, GA R. Lang Company, INC. 3 insp. Visalia, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

SNO Bandit
Rutland, MA
0 inspections $0
Cellars at Jasper Hill Farms
Greensboro, VT
0 inspections $0
Beckwith Lumber Company
Slatyfork, WV
4 inspections $17,100
Performance Springs Incorporated
New Hudson, MI
2 inspections $17,100
Barber Steel Foundry CORP
Rothbury, MI
6 inspections $17,100

Compare Tool World, INC. vs SNO Bandit side-by-side →

What to do with this record

Use Tool World, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tool World, INC. against SNO Bandit, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tool World, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tool World, INC. safe to work at? ▼
Based on OSHA records, Tool World, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 27 violations across 3 inspections, including 18 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tool World, INC. have? ▼
Tool World, INC. has 27 OSHA violations on record, including 18 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $17,101.
How many OSHA inspections has Tool World, INC. had? ▼
Tool World, INC. has had 3 OSHA inspections, with the first recorded on 2012-05-17 and the most recent on 2023-02-16. This averages 9.0 violations per inspection.
What is the total penalty amount for Tool World, INC.? ▼
Tool World, INC. has been assessed $17,101 in current OSHA penalties, reduced from an initial assessment of $28,501 (a 40.0% reduction).
Does Tool World, INC. have any serious or willful violations? ▼
Yes. Tool World, INC. has 18 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tool World, INC. operate in? ▼
Tool World, INC. operates in the Manufacturing sector (NAICS code 325510). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Tool World, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tool World, INC. ranks #20,945 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tool World, INC.'s safety record compare to industry average? ▼
Tool World, INC.'s total OSHA penalty of $17,101 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, SNO Bandit in Rutland, MA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.