PlainWorker
Employers › PR

Manufacturing · Carolina, PR

Tool & Metal Higher Precision CORP

According to OSHA enforcement records (2010–2026), Tool & Metal Higher Precision CORP has a concerning safety record: 10 violations across 2 inspections. See the full breakdown below.

Lower half by penalty70% serious
$2,550
OSHA penalties
10
Violations cited
2
OSHA inspections
#72,618
of 100,495 penalized employers

Tool & Metal Higher Precision CORP in Carolina, PR has been the subject of 2 OSHA workplace inspections and 10 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,550. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tool & Metal Higher Precision CORP 2 times over 1 year - more than twice a year on average. These inspections resulted in 10 violations, averaging 5.0 per inspection - a notably high rate. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, E & E Manufacturing of Tennessee LLC in Athens, TN is another manufacturing employer with 2 OSHA inspections on record and $2,550 in current penalties.

5.0
violations per inspection
70.0%
of violations were serious
28%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tool & Metal Higher Precision CORP runs well below peers (0.17x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,550 Top 28% most affordable more affordable than 72% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Tool & Metal Higher Precision CORP

The federal enforcement record for Tool & Metal Higher Precision CORP in Carolina, PR includes 2 OSHA inspections and 10 violations, translating to 5.00 violations per inspection. Of those violations, 7 (70.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $2,550 in initial penalties against this employer, later adjusted to a current total of $2,550 - no reduction from the original assessment. Average penalty per inspection works out to $1,275. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.17x the sector average).

Inspection activity spans from 2019-07-31 to 2019-08-29, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-07-31

Last Inspection

2019-08-29

Inspection Span

1 yr

Violations / Inspection

5.0

Avg Penalty / Inspection

$1,275

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 5.0 violations per visit. That's $1,275 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

7

Serious

70.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

30.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,550

Current Penalty Amount

$2,550

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Tool & Metal Higher Precision CORP compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Tool & Metal Higher Precision CORP Industry Avg
Inspections 2 2.5
Violations 10 7.8
Total Penalty $2,550 $15,410
Avg Penalty per Inspection $1,275 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Midwest Tank CO
Big Lake, MN
2 inspections $2,550
Southeastern Metal Fabricators, Incorporated
Rockland, MA
4 inspections $2,550
Morgan Advanced Materials-Certech
Wilkes Barre, PA
2 inspections $2,550
Alcon Research, LTD.
Sinking Spring, PA
3 inspections $2,550
E & E Manufacturing of Tennessee LLC
Athens, TN
2 inspections $2,550

Compare Tool & Metal Higher Precision CORP vs Midwest Tank CO side-by-side →

Frequently Asked Questions

Is Tool & Metal Higher Precision CORP safe to work at? ▼
Based on OSHA records, Tool & Metal Higher Precision CORP's workplace safety record is concerning, with multiple serious compliance issues. The employer has 10 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tool & Metal Higher Precision CORP have? ▼
Tool & Metal Higher Precision CORP has 10 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,550.
How many OSHA inspections has Tool & Metal Higher Precision CORP had? ▼
Tool & Metal Higher Precision CORP has had 2 OSHA inspections, with the first recorded on 2019-07-31 and the most recent on 2019-08-29. This averages 5.0 violations per inspection.
What is the total penalty amount for Tool & Metal Higher Precision CORP? ▼
Tool & Metal Higher Precision CORP has been assessed $2,550 in current OSHA penalties.
Does Tool & Metal Higher Precision CORP have any serious or willful violations? ▼
Yes. Tool & Metal Higher Precision CORP has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tool & Metal Higher Precision CORP operate in? ▼
Tool & Metal Higher Precision CORP operates in the Manufacturing sector (NAICS code 332322). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Tool & Metal Higher Precision CORP's safety record compare to industry average? ▼
Tool & Metal Higher Precision CORP's total OSHA penalty of $2,550 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, E & E Manufacturing of Tennessee LLC in Athens, TN is a similar manufacturing employer with $2,550 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in PR

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Tool & Metal Higher Precision CORP's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.