PlainWorker
Employers › MI

Manufacturing · Royal Oak, MI

Tool-Craft Industries INC

According to OSHA enforcement records (2010–2026), Tool-Craft Industries INC ranks #87,363 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 2 inspections.

Lower half by penalty75% serious
$930
OSHA penalties
8
Violations cited
2
OSHA inspections
#87,363
of 99,447 penalized employers

Tool-Craft Industries INC in Royal Oak, MI has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $930. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tool-Craft Industries INC 2 times over 2 years, roughly annually. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #87,363 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Village Handcrafted Cabinetry INC. in Lansdale, PA is another manufacturing employer with 2 OSHA inspections on record and $931 in current penalties.

4.0
violations per inspection
75.0%
of violations were serious
#87,363
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 8 violations across 2 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Tool-Craft Industries INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tool-Craft Industries INC runs well below peers (0.06x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$930 Top 12% most affordable more affordable than 88% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tool-Craft Industries INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.39.919.529.138.8OSHA inspectionsViolations citedWARE MILLING COMPANY…, OSHA inspections: 2 · Violations cited: 37FRAZER & JONES COMPA…, OSHA inspections: 2 · Violations cited: 25FORBO FLOORING INC, OSHA inspections: 2 · Violations cited: 16PEKING NOODLE CO., I…, OSHA inspections: 2 · Violations cited: 11PRICE RUBBER CORP., OSHA inspections: 2 · Violations cited: 29SMITH-BLAIR, INC., OSHA inspections: 2 · Violations cited: 2APPIAN MANUFACTURING…, OSHA inspections: 2 · Violations cited: 3TANNER TIMBER SERVIC…, OSHA inspections: 2 · Violations cited: 5AMERICAN SUGAR REFIN…, OSHA inspections: 2 · Violations cited: 11FLEXO CONVERTERS USA…, OSHA inspections: 2 · Violations cited: 7CUSTOM WOOD PRODUCTS, OSHA inspections: 2 · Violations cited: 9ENCOMPASS, LLC, OSHA inspections: 2 · Violations cited: 11ATLAS ROOFING CORPOR…, OSHA inspections: 2 · Violations cited: 9EVONIK CORPORATION, OSHA inspections: 2 · Violations cited: 6ADVANCED DIGITAL CAB…, OSHA inspections: 2 · Violations cited: 10SUPER MIX OF WISCONS…, OSHA inspections: 2 · Violations cited: 24HOHMANN & BARNARD, I…, OSHA inspections: 2 · Violations cited: 5H & M PLATING COMPAN…, OSHA inspections: 2 · Violations cited: 15WILSON SPORTING GOOD…, OSHA inspections: 2 · Violations cited: 6INFICON EDC, INC., OSHA inspections: 2 · Violations cited: 10Tool-Craft Industrie…, OSHA inspections: 2 · Violations cited: 8
Tool-Craft Industries INC has 2 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tool-Craft Industries INC in the Manufacturing enforcement ledger

Manufacturing sector: Tool-Craft Industries INC is the #32,592 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($930).

How Tool-Craft Industries INC Compares

Tool-Craft Industries INC's 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.06x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-12-05

Last Inspection

2017-04-24

Inspection Span

2 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$465

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 4.0 violations per visit. That's $465 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,000

Current Penalty Amount

$930

Penalty Reduction

53.5%

What this shows Penalties were reduced by $1,070 from the initial assessment of $2,000. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tool-Craft Industries INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Tool-Craft Industries INC Industry Avg
Inspections 2 2.6
Violations 8 8.0
Total Penalty $930 $15,763
Avg Penalty per Inspection $465 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tool-Craft Industries INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($930 here).

Interfacial Consultants LLC $930 WI Valor Company DBA Creative Tool & Engineering $930 MN Pioneer Pump INC $930 OR Manchester Packing, INC. $930 CT

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Ware Milling Company, INC. 2 insp. Waycross, GA Frazer & Jones Company, INC. 2 insp. Solvay, NY Forbo Flooring INC 2 insp. Hazleton, PA Peking Noodle CO., INC. 2 insp. Los Angeles, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Interfacial Consultants LLC
River Falls, WI
2 inspections $930
Valor Company DBA Creative Tool & Engineering
Belle Plaine, MN
2 inspections $930
Pioneer Pump INC
Canby, OR
3 inspections $930
Manchester Packing, INC.
Vernon, CT
2 inspections $930
Village Handcrafted Cabinetry INC.
Lansdale, PA
2 inspections $931

Compare Tool-Craft Industries INC vs Interfacial Consultants LLC side-by-side →

What to do with this record

Use Tool-Craft Industries INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tool-Craft Industries INC against Interfacial Consultants LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tool-Craft Industries INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tool-Craft Industries INC safe to work at? ▼
Based on OSHA records, Tool-Craft Industries INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tool-Craft Industries INC have? ▼
Tool-Craft Industries INC has 8 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $930.
How many OSHA inspections has Tool-Craft Industries INC had? ▼
Tool-Craft Industries INC has had 2 OSHA inspections, with the first recorded on 2014-12-05 and the most recent on 2017-04-24. This averages 4.0 violations per inspection.
What is the total penalty amount for Tool-Craft Industries INC? ▼
Tool-Craft Industries INC has been assessed $930 in current OSHA penalties, reduced from an initial assessment of $2,000 (a 53.5% reduction).
Does Tool-Craft Industries INC have any serious or willful violations? ▼
Yes. Tool-Craft Industries INC has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tool-Craft Industries INC operate in? ▼
Tool-Craft Industries INC operates in the Manufacturing sector (NAICS code 333515). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Tool-Craft Industries INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tool-Craft Industries INC ranks #87,363 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tool-Craft Industries INC's safety record compare to industry average? ▼
Tool-Craft Industries INC's total OSHA penalty of $930 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Village Handcrafted Cabinetry INC. in Lansdale, PA is a similar manufacturing employer with $931 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.