PlainWorker
Employers › TX

Manufacturing · Magnolia, TX

Tomball Sheet Metal, L.P.

According to OSHA enforcement records (2010–2026), Tomball Sheet Metal, L.P. ranks #63,227 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Lower half by penalty0% serious
$3,736
OSHA penalties
4
Violations cited
2
OSHA inspections
#63,227
of 99,447 penalized employers

Tomball Sheet Metal, L.P. in Magnolia, TX has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,736. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tomball Sheet Metal, L.P. 2 times over 1 year - more than twice a year on average. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #63,227 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Charleston CORP in Bremen, IN is another manufacturing employer with 2 OSHA inspections on record and $3,738 in current penalties.

2.0
violations per inspection
0.0%
of violations were serious
#63,227
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Tomball Sheet Metal, L.P. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tomball Sheet Metal, L.P. runs well below peers (0.24x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,736 Top 36% most affordable more affordable than 64% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tomball Sheet Metal, L.P..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.912.52435.647.1OSHA inspectionsViolations citedPGT INDUSTRIES INC., OSHA inspections: 2 · Violations cited: 19SAFETY-KLEEN SYSTEMS…, OSHA inspections: 2 · Violations cited: 9LOOS & COMPANY, INC., OSHA inspections: 2 · Violations cited: 45SODECIA USA AUTOMOTI…, OSHA inspections: 2 · Violations cited: 12WESTWARD SEAFOODS, INC, OSHA inspections: 2 · Violations cited: 5WISCONSIN CHEESE GRO…, OSHA inspections: 2 · Violations cited: 11NEW FRESH BREAD BAKE…, OSHA inspections: 2 · Violations cited: 8LOTITO FOODS, INC., OSHA inspections: 2 · Violations cited: 13PANOLAM INDUSTRIES I…, OSHA inspections: 2 · Violations cited: 22KIMS ROLL UP INC, OSHA inspections: 2 · Violations cited: 8UMT INTERNATIONAL LLC, OSHA inspections: 2 · Violations cited: 11CAROL CALLAHAN, OSHA inspections: 2 · Violations cited: 24CONCRETE MATERIALS, …, OSHA inspections: 2 · Violations cited: 9BIO INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 19MENASHA PACKAGING CO…, OSHA inspections: 2 · Violations cited: 3ALTTRAN, INC., OSHA inspections: 2 · Violations cited: 22KNOWLES PRECISION DE…, OSHA inspections: 2 · Violations cited: 7DREXEL CHEMICAL COMP…, OSHA inspections: 2 · Violations cited: 20PAMLICO AIR, OSHA inspections: 2 · Violations cited: 3DILLON COMPANIES, LLC, OSHA inspections: 2 · Violations cited: 4Tomball Sheet Metal,…, OSHA inspections: 2 · Violations cited: 4
Tomball Sheet Metal, L.P. has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tomball Sheet Metal, L.P. in the Manufacturing enforcement ledger

Manufacturing sector: Tomball Sheet Metal, L.P. is the #25,694 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($3,736).

How Tomball Sheet Metal, L.P. Compares

Tomball Sheet Metal, L.P.'s 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.24x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2022-06-06

Last Inspection

2023-01-12

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$1,868

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.0 violations per visit. That's $1,868 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$15,954

Current Penalty Amount

$3,736

Penalty Reduction

76.6%

What this shows Penalties were reduced by $12,218 from the initial assessment of $15,954. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tomball Sheet Metal, L.P. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Tomball Sheet Metal, L.P. Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $3,736 $15,763
Avg Penalty per Inspection $1,868 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tomball Sheet Metal, L.P., both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,736 here).

Absolute Dimensions, LLC $3,736 KS Lesko Enterprises, INC. $3,735 PA Masterbrand Cabinets, INC. $3,735 AL Charleston CORP $3,738 IN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

PGT Industries INC. 2 insp. Hialeah, FL Safety-Kleen Systems, INC 2 insp. Burlington, NJ Loos & Company, INC. 2 insp. Pomfret, CT Sodecia USA Automotive CORP 2 insp. Lake Orion, MI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Absolute Dimensions, LLC
Wichita, KS
2 inspections $3,736
Burrows Cabinets
Taylor, TX
0 inspections $0
Lesko Enterprises, INC.
Albion, PA
2 inspections $3,735
Masterbrand Cabinets, INC.
Auburn, AL
3 inspections $3,735
Charleston CORP
Bremen, IN
2 inspections $3,738

Compare Tomball Sheet Metal, L.P. vs Absolute Dimensions, LLC side-by-side →

What to do with this record

Use Tomball Sheet Metal, L.P.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tomball Sheet Metal, L.P. against Absolute Dimensions, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tomball Sheet Metal, L.P.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tomball Sheet Metal, L.P. safe to work at? ▼
Based on OSHA records, Tomball Sheet Metal, L.P.'s workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tomball Sheet Metal, L.P. have? ▼
Tomball Sheet Metal, L.P. has 4 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,736.
How many OSHA inspections has Tomball Sheet Metal, L.P. had? ▼
Tomball Sheet Metal, L.P. has had 2 OSHA inspections, with the first recorded on 2022-06-06 and the most recent on 2023-01-12. This averages 2.0 violations per inspection.
What is the total penalty amount for Tomball Sheet Metal, L.P.? ▼
Tomball Sheet Metal, L.P. has been assessed $3,736 in current OSHA penalties, reduced from an initial assessment of $15,954 (a 76.6% reduction).
What industry does Tomball Sheet Metal, L.P. operate in? ▼
Tomball Sheet Metal, L.P. operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Tomball Sheet Metal, L.P. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tomball Sheet Metal, L.P. ranks #63,227 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tomball Sheet Metal, L.P.'s safety record compare to industry average? ▼
Tomball Sheet Metal, L.P.'s total OSHA penalty of $3,736 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Charleston CORP in Bremen, IN is a similar manufacturing employer with $3,738 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.