PlainWorker
Employers › OH

Manufacturing · Toledo, OH

Toledo Tool & Die Company, INC.

According to OSHA enforcement records (2010–2026), Toledo Tool & Die Company, INC. has a concerning safety record: 14 violations across 4 inspections. See the full breakdown below.

Top 5% by penalty86% serious
$72,626
OSHA penalties
14
Violations cited
4
OSHA inspections
#2,895
of 100,495 penalized employers

Toledo Tool & Die Company, INC. in Toledo, OH has been the subject of 4 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $72,626. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Toledo Tool & Die Company, INC. 4 times over 8 years, roughly once every couple of years. These inspections resulted in 14 violations, averaging 3.5 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top 5% of penalized employers nationally. Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.6x the sector average) on inspection frequency. For comparison, Dimensional Machine Works LLC in Houston, TX is another manufacturing employer with 2 OSHA inspections on record and $72,585 in current penalties.

3.5
violations per inspection
85.7%
of violations were serious
97%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Toledo Tool & Die Company, INC. runs well above peers (4.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$72,626 Bottom 3% least affordable more affordable than 3% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,101 U.S. employers with a penalty (5%). This entry ($72,626) is well above this band, the chart's rightmost open-ended bucket. This employer: $72,626 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Toledo Tool & Die Company, INC.

The federal enforcement record for Toledo Tool & Die Company, INC. in Toledo, OH includes 4 OSHA inspections and 14 violations, translating to 3.50 violations per inspection. Of those violations, 12 (85.7%) were classified as serious, 0 (0.0%) as willful, and 1 (7.1%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $193,565 in initial penalties against this employer, later adjusted to a current total of $72,626 - a 62.5% reduction. Average penalty per inspection works out to $18,157. Against the Manufacturing industry average of $15,410 per employer, this record runs well above peers (4.7x the sector average).

Inspection activity spans from 2015-05-04 to 2023-09-20, a window of roughly 8 years.

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2015-05-04

Last Inspection

2023-09-20

Inspection Span

8 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$18,157

Industry Avg / Inspection

$6,092

What this shows 4 inspections over 8 years, averaging 3.5 violations per visit. That's $18,157 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

12

Serious

85.7% of total

0

Willful

0.0% of total

1

Repeat

7.1% of total

1

Other-Than-Serious

7.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$193,565

Current Penalty Amount

$72,626

Penalty Reduction

62.5%

What this shows Penalties were reduced by $120,939 from the initial assessment of $193,565. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Toledo Tool & Die Company, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Toledo Tool & Die Company, INC. Industry Avg
Inspections 4 2.5
Violations 14 7.8
Total Penalty $72,626 $15,410
Avg Penalty per Inspection $18,157 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Dimensional Machine Works LLC
Houston, TX
2 inspections $72,585
Cemex Construction Materials Pacific LLC
Apple Valley, CA
22 inspections $72,555
Dicastal North America INC
Greenville, MI
8 inspections $72,700
Sauder Woodworking CO.
Archbold, OH
11 inspections $72,712
Seneca Foods Corporation
Ripon, WI
2 inspections $72,510

Compare Toledo Tool & Die Company, INC. vs Dimensional Machine Works LLC side-by-side →

Frequently Asked Questions

Is Toledo Tool & Die Company, INC. safe to work at? ▼
Based on OSHA records, Toledo Tool & Die Company, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 4 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Toledo Tool & Die Company, INC. have? ▼
Toledo Tool & Die Company, INC. has 14 OSHA violations on record, including 12 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $72,626.
How many OSHA inspections has Toledo Tool & Die Company, INC. had? ▼
Toledo Tool & Die Company, INC. has had 4 OSHA inspections, with the first recorded on 2015-05-04 and the most recent on 2023-09-20. This averages 3.5 violations per inspection.
What is the total penalty amount for Toledo Tool & Die Company, INC.? ▼
Toledo Tool & Die Company, INC. has been assessed $72,626 in current OSHA penalties, reduced from an initial assessment of $193,565 (a 62.5% reduction).
Does Toledo Tool & Die Company, INC. have any serious or willful violations? ▼
Yes. Toledo Tool & Die Company, INC. has 12 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Toledo Tool & Die Company, INC. operate in? ▼
Toledo Tool & Die Company, INC. operates in the Manufacturing sector (NAICS code 336370). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Toledo Tool & Die Company, INC.'s safety record compare to industry average? ▼
Toledo Tool & Die Company, INC.'s total OSHA penalty of $72,626 is above the Manufacturing industry average of $15,410 per employer (4.7x the average). The employer has 4 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Dimensional Machine Works LLC in Houston, TX is a similar manufacturing employer with $72,585 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in OH

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Toledo Tool & Die Company, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.