PlainWorker
Employers › NV

Manufacturing · Henderson, NV

Titanium Metals CORP of America

According to OSHA enforcement records (2010–2026), Titanium Metals CORP of America ranks #2,182 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 34 violations across 7 inspections.

Top 5% by penalty88% serious
$87,300
OSHA penalties
34
Violations cited
7
OSHA inspections
#2,182
of 99,447 penalized employers

Titanium Metals CORP of America in Henderson, NV has been the subject of 7 OSHA workplace inspections and 34 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $87,300. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Titanium Metals CORP of America 7 times over 2 years - more than twice a year on average. These inspections resulted in 34 violations, averaging 4.9 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #2,182 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 30 were classified as serious and 4 as willful - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.7x the sector average) on inspection frequency. For comparison, Flex-N-Gate Corporation in Urbana, IL is another manufacturing employer with 12 OSHA inspections on record and $87,343 in current penalties.

4.9
violations per inspection
88.2%
of violations were serious
#2,182
of 99,447 penalized employers

Compliance score

F 19/100
  • F OSHA safety compliance: 34 violations across 7 OSHA inspections (4.9 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Titanium Metals CORP of America runs far above peers (5.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$87,300 Bottom 2% least affordable more affordable than 2% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($87,300) is well above this band, the chart's rightmost open-ended bucket. This employer: $87,300 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Titanium Metals CORP of America.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both7.07.077.07.0023.346.670.093.3OSHA inspectionsViolations citedRESCO PRODUCTS, INC., OSHA inspections: 7 · Violations cited: 34TRAVIS PATTERN & FOU…, OSHA inspections: 7 · Violations cited: 40POLYMER INDUSTRIES, …, OSHA inspections: 7 · Violations cited: 17LEPRINO FOODS COMPANY, OSHA inspections: 7 · Violations cited: 12STERLING DIE & ENGIN…, OSHA inspections: 7 · Violations cited: 65ASSOCIATED MILK PROD…, OSHA inspections: 7 · Violations cited: 31WESTFIELD ELECTROPLA…, OSHA inspections: 7 · Violations cited: 13TRINITY RIVER LUMBER…, OSHA inspections: 7 · Violations cited: 15FRANK CHERVAN, INC., OSHA inspections: 7 · Violations cited: 30AURORA PACKING COMPA…, OSHA inspections: 7 · Violations cited: 3TESKE MANUFACTURING …, OSHA inspections: 7 · Violations cited: 13TIGERTON LUMBER COMP…, OSHA inspections: 7 · Violations cited: 46CHICAGO DRYER COMPANY, OSHA inspections: 7 · Violations cited: 43ZOTOS INTERNATIONAL …, OSHA inspections: 7 · Violations cited: 89SEKISUI VOLTEK LLC, OSHA inspections: 7 · Violations cited: 44MITTERNIGHT BOILER W…, OSHA inspections: 7 · Violations cited: 26PRIMEX PLASTICS CORP…, OSHA inspections: 7 · Violations cited: 20RUTLAND PLASTIC TECH…, OSHA inspections: 7 · Violations cited: 19STANDARD STEEL, LLC, OSHA inspections: 7 · Violations cited: 26NISSHINBO AUTOMOTIVE…, OSHA inspections: 7 · Violations cited: 32Titanium Metals CORP…, OSHA inspections: 7 · Violations cited: 34
Titanium Metals CORP of America has 7 OSHA inspections on record and 34 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Titanium Metals CORP of America in the Manufacturing enforcement ledger

In Manufacturing, Titanium Metals CORP of America sits at penalty rank #1,140 of 35,243 penalized establishments ($87,300 assessed).

How Titanium Metals CORP of America Compares

Titanium Metals CORP of America's 4.86 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs far above peers (5.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

7

First Inspection

2011-11-17

Last Inspection

2014-04-07

Inspection Span

2 yrs

Violations / Inspection

4.9

Avg Penalty / Inspection

$12,471

Industry Avg / Inspection

$6,093

What this shows 7 inspections over 2 years, averaging 4.9 violations per visit. That's $12,471 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

30

Serious

88.2% of total

4

Willful

11.8% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$475,500

Current Penalty Amount

$87,300

Penalty Reduction

81.6%

What this shows Penalties were reduced by $388,200 from the initial assessment of $475,500. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Titanium Metals CORP of America compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Titanium Metals CORP of America Industry Avg
Inspections 7 2.6
Violations 34 8.0
Total Penalty $87,300 $15,763
Avg Penalty per Inspection $12,471 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Titanium Metals CORP of America, both outside NV so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($87,300 here).

Flex-N-Gate Corporation $87,343 IL Browning's Metal Finishing $87,198 GA Seneca Foods Corporation $87,176 WI Nutrition Services, INC. $87,134 NE

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (7 inspections here).

Resco Products, INC. 7 insp. Tarentum, PA Travis Pattern & Foundry INC 7 insp. Spokane, WA Polymer Industries, LLC 7 insp. Henagar, AL Leprino Foods Company 7 insp. Tracy, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Flex-N-Gate Corporation
Urbana, IL
12 inspections $87,343
Browning's Metal Finishing
Maysville, GA
6 inspections $87,198
PetaIO Inc
Santa Clara, CA
0 inspections $0
Seneca Foods Corporation
Gillett, WI
4 inspections $87,176
CBBC, INC.
Gilbert, AZ
0 inspections $0

Compare Titanium Metals CORP of America vs Flex-N-Gate Corporation side-by-side →

What to do with this record

Use Titanium Metals CORP of America's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Titanium Metals CORP of America against Flex-N-Gate Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Titanium Metals CORP of America's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Titanium Metals CORP of America safe to work at? ▼
Based on OSHA records, Titanium Metals CORP of America's workplace safety record is concerning, with multiple serious compliance issues. The employer has 34 violations across 7 inspections, including 30 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Titanium Metals CORP of America have? ▼
Titanium Metals CORP of America has 34 OSHA violations on record, including 30 serious, 4 willful, and 0 repeat violations. The total current penalty amount is $87,300.
How many OSHA inspections has Titanium Metals CORP of America had? ▼
Titanium Metals CORP of America has had 7 OSHA inspections, with the first recorded on 2011-11-17 and the most recent on 2014-04-07. This averages 4.9 violations per inspection.
What is the total penalty amount for Titanium Metals CORP of America? ▼
Titanium Metals CORP of America has been assessed $87,300 in current OSHA penalties, reduced from an initial assessment of $475,500 (a 81.6% reduction).
Does Titanium Metals CORP of America have any serious or willful violations? ▼
Yes. Titanium Metals CORP of America has 30 serious violations, 4 willful violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Titanium Metals CORP of America operate in? ▼
Titanium Metals CORP of America operates in the Manufacturing sector (NAICS code 331419). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Titanium Metals CORP of America rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Titanium Metals CORP of America ranks #2,182 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Titanium Metals CORP of America's safety record compare to industry average? ▼
Titanium Metals CORP of America's total OSHA penalty of $87,300 is above the Manufacturing industry average of $15,763 per employer (5.5x the average). The employer has 7 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Flex-N-Gate Corporation in Urbana, IL is a similar manufacturing employer with $87,343 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 7 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.