Mining, Quarrying, Oil & Gas · Atmore, AL

Tigersul Products LLC

According to OSHA enforcement records (2010–2026), Tigersul Products LLC has a relatively clean safety record: 0 violations across 2 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
2
OSHA inspections

Tigersul Products LLC in Atmore, AL has been the subject of 2 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tigersul Products LLC 2 times over 1 year - more than twice a year on average. None of these inspections resulted in a citation. Against the Mining, Quarrying, Oil & Gas industry average of 2 inspections per employer, this sits roughly in line with peers (0.9x the sector average) on inspection frequency. For comparison, Robertson's Ready Mix, LTD in Cabazon, CA is another mining, quarrying, oil & gas employer with 4 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 2 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Mining, Quarrying, Oil & Gas employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tigersul Products LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.001.63.14.76.3OSHA inspectionsViolations citedMATRIX SERVICE, INC., OSHA inspections: 2 · Violations cited: 2CENTENNIAL RESOURCE …, OSHA inspections: 2 · Violations cited: 0PRECISION DRILLING C…, OSHA inspections: 2 · Violations cited: 0AIM DIRECTIONAL SERV…, OSHA inspections: 2 · Violations cited: 1MOST WANTED WELL SER…, OSHA inspections: 2 · Violations cited: 3BAKER HUGHES OILFIEL…, OSHA inspections: 2 · Violations cited: 4CONOCOPHILLIPS COMPANY, OSHA inspections: 2 · Violations cited: 2PRECISION ADDITIVES …, OSHA inspections: 2 · Violations cited: 5NORBERG CRUSHING, INC., OSHA inspections: 2 · Violations cited: 3STERLING DRILLING CO…, OSHA inspections: 2 · Violations cited: 4KISSNER GROUP, OSHA inspections: 2 · Violations cited: 6CITGO PETROLEUM CORP…, OSHA inspections: 2 · Violations cited: 3PETROMARK DRILLING LLC, OSHA inspections: 2 · Violations cited: 1CALMAT CO., OSHA inspections: 2 · Violations cited: 2HANSON AGGREGATES LLC, OSHA inspections: 2 · Violations cited: 3AKITA DRILLING USA C…, OSHA inspections: 2 · Violations cited: 0PDC PERMIAN INC., OSHA inspections: 2 · Violations cited: 0P.W. GILLIBRAND CO INC, OSHA inspections: 2 · Violations cited: 0CRESCENT SERVICES, LLC, OSHA inspections: 2 · Violations cited: 0PATTERSON UTI DRILLI…, OSHA inspections: 2 · Violations cited: 0Tigersul Products LLC, OSHA inspections: 2 · Violations cited: 0
Tigersul Products LLC has 2 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Mining, Quarrying, Oil & Gas peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Tigersul Products LLC Compares

2 OSHA inspections on record for Tigersul Products LLC in Atmore, AL, zero violations cited, a cleaner record than the Mining, Quarrying, Oil & Gas sector average of 3.1 violations per employer.

No OSHA penalty has been assessed against Tigersul Products LLC to date. The Mining, Quarrying, Oil & Gas sector average runs $4,539 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2021-08-05

Last Inspection

2021-10-05

Inspection Span

1 yr

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$2,042

What this shows 2 inspections over 1 year, averaging 0.0 violations per visit. That's $0 per inspection vs. the Mining, Quarrying, Oil & Gas average of $2,042.

Industry Safety Context: Mining, Quarrying, Oil & Gas

How Tigersul Products LLC compares to the Mining, Quarrying, Oil & Gas sector, which has 2,294 employers tracked by PlainWorker.

Metric Tigersul Products LLC Industry Avg
Inspections 2 2.2
Violations 0 3.1
Total Penalty $0 $4,539
Avg Penalty per Inspection $0 $2,042

Nationwide Mining, Quarrying, Oil & Gas peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tigersul Products LLC, both outside AL so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Mining, Quarrying, Oil & Gas

Showing 5 of 2293 other employers tracked in this sector.

Compare Tigersul Products LLC vs Fluids Management II, LTD. side-by-side →

What to do with this record

Use Tigersul Products LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tigersul Products LLC against Fluids Management II, LTD., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tigersul Products LLC's inspection and penalty record is typical for Mining, Quarrying, Oil & Gas or an outlier against the sector's own average. View the Mining, Quarrying, Oil & Gas sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tigersul Products LLC safe to work at?
Based on OSHA records, Tigersul Products LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 2 inspections. Compared to Mining, Quarrying, Oil & Gas industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tigersul Products LLC have?
Tigersul Products LLC has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Tigersul Products LLC had?
Tigersul Products LLC has had 2 OSHA inspections, with the first recorded on 2021-08-05 and the most recent on 2021-10-05. This averages 0.0 violations per inspection.
What is the total penalty amount for Tigersul Products LLC?
Tigersul Products LLC has been assessed $0 in current OSHA penalties.
What industry does Tigersul Products LLC operate in?
Tigersul Products LLC operates in the Mining, Quarrying, Oil & Gas sector (NAICS code 212393). This industry has 2,294 employers tracked by PlainWorker, with 5,098 total OSHA inspections and $10.41M in cumulative penalties.
How does Tigersul Products LLC's safety record compare to industry average?
Tigersul Products LLC's total OSHA penalty of $0 is below the Mining, Quarrying, Oil & Gas industry average of $4,539 per employer. The employer has 2 inspections compared to the industry average of 2.2 per employer. For a direct comparison, Robertson's Ready Mix, LTD in Cabazon, CA is a similar mining, quarrying, oil & gas employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.