Manufacturing · Quakertown, PA

Thermocouple Technology, LLC

According to OSHA enforcement records (2010–2026), Thermocouple Technology, LLC ranks #38,501 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 2 inspections.

Upper half by penalty100% serious
$8,902
OSHA penalties
8
Violations cited
2
OSHA inspections
#38,501
of 99,447 penalized employers

Thermocouple Technology, LLC in Quakertown, PA has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,902. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Thermocouple Technology, LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #38,501 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 8 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Anchor Bolts and Fasteners, L.L.C. in Ashland City, TN is another manufacturing employer with 2 OSHA inspections on record and $8,900 in current penalties.

4.0
violations per inspection
100.0%
of violations were serious
#38,501
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 8 violations across 2 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Thermocouple Technology, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Thermocouple Technology, LLC runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,902 Bottom 39% least affordable more affordable than 39% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Thermocouple Technology, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.68.115.522.930.4OSHA inspectionsViolations citedSEATS, INC., OSHA inspections: 2 · Violations cited: 3SOUTHERN CLASSIC FOO…, OSHA inspections: 2 · Violations cited: 11HELLAS CONSTRUCTION,…, OSHA inspections: 2 · Violations cited: 14RELIANCE PRIVATE LAB…, OSHA inspections: 2 · Violations cited: 12RELEASE BW, INC., OSHA inspections: 2 · Violations cited: 17CAROL'S COOKIES, INC., OSHA inspections: 2 · Violations cited: 2RYNONE MANUFACTURING…, OSHA inspections: 2 · Violations cited: 22ALEXANDER MANUFACTUR…, OSHA inspections: 2 · Violations cited: 10FURST-MCNESS COMPANY, OSHA inspections: 2 · Violations cited: 13HERITAGE SLEEP PRODU…, OSHA inspections: 2 · Violations cited: 20LISCIO'S ITALIAN BAK…, OSHA inspections: 2 · Violations cited: 9SPECIALTY PRINTING, …, OSHA inspections: 2 · Violations cited: 11ETHAN ALLEN OPERATIO…, OSHA inspections: 2 · Violations cited: 5NIDEC MOTOR CORPORAT…, OSHA inspections: 2 · Violations cited: 2OMEGA EXTRUDING CORP…, OSHA inspections: 2 · Violations cited: 12LEVMAR INC., OSHA inspections: 2 · Violations cited: 29CARDINAL CONTAINER A…, OSHA inspections: 2 · Violations cited: 9SUBZERO INSULATION &…, OSHA inspections: 2 · Violations cited: 21NORTON PACKAGING INC., OSHA inspections: 2 · Violations cited: 7PMG SM FLTX, LLC, OSHA inspections: 2 · Violations cited: 2Thermocouple Technol…, OSHA inspections: 2 · Violations cited: 8
Thermocouple Technology, LLC has 2 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Thermocouple Technology, LLC in the Manufacturing enforcement ledger

In Manufacturing, Thermocouple Technology, LLC sits at penalty rank #17,127 of 35,243 penalized establishments ($8,902 assessed).

How Thermocouple Technology, LLC Compares

Thermocouple Technology, LLC's 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2024-09-18

Last Inspection

2024-09-18

Inspection Span

1 yr

Violations / Inspection

4.0

Avg Penalty / Inspection

$4,451

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 4.0 violations per visit. That's $4,451 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

8

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$17,969

Current Penalty Amount

$8,902

Penalty Reduction

50.5%

What this shows Penalties were reduced by $9,067 from the initial assessment of $17,969. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Thermocouple Technology, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Thermocouple Technology, LLC Industry Avg
Inspections 2 2.6
Violations 8 8.0
Total Penalty $8,902 $15,763
Avg Penalty per Inspection $4,451 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Thermocouple Technology, LLC, both outside PA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Thermocouple Technology, LLC vs Hatch & Kirk, INC. side-by-side →

What to do with this record

Use Thermocouple Technology, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Thermocouple Technology, LLC against Hatch & Kirk, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Thermocouple Technology, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Thermocouple Technology, LLC safe to work at?
Based on OSHA records, Thermocouple Technology, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 8 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Thermocouple Technology, LLC have?
Thermocouple Technology, LLC has 8 OSHA violations on record, including 8 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $8,902.
How many OSHA inspections has Thermocouple Technology, LLC had?
Thermocouple Technology, LLC has had 2 OSHA inspections, with the first recorded on 2024-09-18 and the most recent on 2024-09-18. This averages 4.0 violations per inspection.
What is the total penalty amount for Thermocouple Technology, LLC?
Thermocouple Technology, LLC has been assessed $8,902 in current OSHA penalties, reduced from an initial assessment of $17,969 (a 50.5% reduction).
Does Thermocouple Technology, LLC have any serious or willful violations?
Yes. Thermocouple Technology, LLC has 8 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Thermocouple Technology, LLC operate in?
Thermocouple Technology, LLC operates in the Manufacturing sector (NAICS code 334512). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Thermocouple Technology, LLC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Thermocouple Technology, LLC ranks #38,501 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Thermocouple Technology, LLC's safety record compare to industry average?
Thermocouple Technology, LLC's total OSHA penalty of $8,902 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Anchor Bolts and Fasteners, L.L.C. in Ashland City, TN is a similar manufacturing employer with $8,900 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.