PlainWorker
Employers › NE

Manufacturing · Omaha, NE

The James Skinner LLC

According to OSHA enforcement records (2010–2026), The James Skinner LLC has a concerning safety record: 54 violations across 8 inspections. See the full breakdown below.

Top 1% by penalty74% serious
$513,550
OSHA penalties
54
Violations cited
8
OSHA inspections
#96
of 100,495 penalized employers

The James Skinner LLC in Omaha, NE has been the subject of 8 OSHA workplace inspections and 54 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $513,550. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on The James Skinner LLC: 8 inspections in 1 year, several times a year. These inspections resulted in 54 violations, averaging 6.8 per inspection - a notably high rate. Its total OSHA penalty ranks in the top 1% of penalized employers nationally. Of these, 40 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (3.2x the sector average) on inspection frequency. For comparison, D&D Manufacturing, INC. in El Paso, TX is another manufacturing employer with 9 OSHA inspections on record and $514,933 in current penalties.

6.8
violations per inspection
74.1%
of violations were serious
100%
of penalized employers rank lower

How The James Skinner LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows The James Skinner LLC runs far above peers (33.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$513,550 Bottom 1% least affordable more affordable than 0% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,101 U.S. employers with a penalty (5%). This entry ($513,550) is well above this band, the chart's rightmost open-ended bucket. This employer: $513,550 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About The James Skinner LLC

The federal enforcement record for The James Skinner LLC in Omaha, NE includes 8 OSHA inspections and 54 violations, translating to 6.75 violations per inspection. Of those violations, 40 (74.1%) were classified as serious, 0 (0.0%) as willful, and 3 (5.6%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $758,257 in initial penalties against this employer, later adjusted to a current total of $513,550 - a 32.3% reduction. Average penalty per inspection works out to $64,194. Against the Manufacturing industry average of $15,410 per employer, this record runs far above peers (33.3x the sector average).

Inspection activity spans from 2024-05-14 to 2025-07-15, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

8

First Inspection

2024-05-14

Last Inspection

2025-07-15

Inspection Span

1 yr

Violations / Inspection

6.8

Avg Penalty / Inspection

$64,194

Industry Avg / Inspection

$6,092

What this shows 8 inspections over 1 year, averaging 6.8 violations per visit. That's $64,194 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

40

Serious

74.1% of total

0

Willful

0.0% of total

3

Repeat

5.6% of total

11

Other-Than-Serious

20.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$758,257

Current Penalty Amount

$513,550

Penalty Reduction

32.3%

What this shows Penalties were reduced by $244,707 from the initial assessment of $758,257. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How The James Skinner LLC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric The James Skinner LLC Industry Avg
Inspections 8 2.5
Violations 54 7.8
Total Penalty $513,550 $15,410
Avg Penalty per Inspection $64,194 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

D&D Manufacturing, INC.
El Paso, TX
9 inspections $514,933
The Valley Fertilizer and Chemical Company Incorporated
Mount Jackson, VA
2 inspections $516,730
Florenza Marble & Granite Corporation
Chicago, IL
2 inspections $509,997
Branscome Incorporated
Hampton, VA
4 inspections $518,700
The Dow Chemical Company
Freeport, TX
7 inspections $25,782

Compare The James Skinner LLC vs D&D Manufacturing, INC. side-by-side →

Frequently Asked Questions

Is The James Skinner LLC safe to work at? ▼
Based on OSHA records, The James Skinner LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 54 violations across 8 inspections, including 40 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does The James Skinner LLC have? ▼
The James Skinner LLC has 54 OSHA violations on record, including 40 serious, 0 willful, and 3 repeat violations. The total current penalty amount is $513,550.
How many OSHA inspections has The James Skinner LLC had? ▼
The James Skinner LLC has had 8 OSHA inspections, with the first recorded on 2024-05-14 and the most recent on 2025-07-15. This averages 6.8 violations per inspection.
What is the total penalty amount for The James Skinner LLC? ▼
The James Skinner LLC has been assessed $513,550 in current OSHA penalties, reduced from an initial assessment of $758,257 (a 32.3% reduction).
Does The James Skinner LLC have any serious or willful violations? ▼
Yes. The James Skinner LLC has 40 serious violations, and 3 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does The James Skinner LLC operate in? ▼
The James Skinner LLC operates in the Manufacturing sector (NAICS code 311813). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does The James Skinner LLC's safety record compare to industry average? ▼
The James Skinner LLC's total OSHA penalty of $513,550 is above the Manufacturing industry average of $15,410 per employer (33.3x the average). The employer has 8 inspections compared to the industry average of 2.5 per employer. For a direct comparison, D&D Manufacturing, INC. in El Paso, TX is a similar manufacturing employer with $514,933 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in NE

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

The James Skinner LLC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 8 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.