PlainWorker
Employers › NY

Manufacturing · Farmingdale, NY

Tekweld Solution INC.

According to OSHA enforcement records (2010–2026), Tekweld Solution INC. ranks #72,791 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 2 inspections.

Lower half by penalty100% serious
$2,450
OSHA penalties
1
Violations cited
2
OSHA inspections
#72,791
of 99,447 penalized employers

Tekweld Solution INC. in Farmingdale, NY has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,450. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tekweld Solution INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 1 violation, averaging 0.5 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #72,791 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Briese Iron Works INC in Rochester, MN is another manufacturing employer with 2 OSHA inspections on record and $2,450 in current penalties.

0.5
violations per inspection
100.0%
of violations were serious
#72,791
of 99,447 penalized employers

Compliance score

B 83/100
  • B OSHA safety compliance: 1 violation across 2 OSHA inspections (0.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Tekweld Solution INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tekweld Solution INC. runs well below peers (0.16x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,450 Top 27% most affordable more affordable than 73% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tekweld Solution INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0010.019.929.939.9OSHA inspectionsViolations citedSILVER BAY SEAFOODS,…, OSHA inspections: 2 · Violations cited: 5PRECISION BUILD SOLU…, OSHA inspections: 2 · Violations cited: 7CARMEN CREATIVE CABI…, OSHA inspections: 2 · Violations cited: 38MEGLIO INTERIORS, LLC, OSHA inspections: 2 · Violations cited: 14WEST COAST IRON, INC., OSHA inspections: 2 · Violations cited: 12NITREX INC., OSHA inspections: 2 · Violations cited: 22GREATWIDE DISTRIBUTI…, OSHA inspections: 2 · Violations cited: 3ALLIED TUBE AND COND…, OSHA inspections: 2 · Violations cited: 16MASTERCRAFTERS, INC., OSHA inspections: 2 · Violations cited: 29COASTAL INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 15ASSONET INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 20BALDWIN FILTERS INC, OSHA inspections: 2 · Violations cited: 7MICROTECH KNIVES, INC., OSHA inspections: 2 · Violations cited: 24ROYAL INTERPACK NORT…, OSHA inspections: 2 · Violations cited: 11PIQUA CHAMPION FOUND…, OSHA inspections: 2 · Violations cited: 21THE EUCLID CHEMICAL …, OSHA inspections: 2 · Violations cited: 2B Y MARBLE INC, OSHA inspections: 2 · Violations cited: 10JV MANUFACTURING, INC., OSHA inspections: 2 · Violations cited: 3AJINOMOTO FOODS NORT…, OSHA inspections: 2 · Violations cited: 13NORTHERN WIND, INC., OSHA inspections: 2 · Violations cited: 9Tekweld Solution INC., OSHA inspections: 2 · Violations cited: 1
Tekweld Solution INC. has 2 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tekweld Solution INC. in the Manufacturing enforcement ledger

Manufacturing sector: Tekweld Solution INC. is the #28,607 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($2,450).

How Tekweld Solution INC. Compares

Tekweld Solution INC.'s 0.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.16x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-08-31

Last Inspection

2012-06-20

Inspection Span

1 yr

Violations / Inspection

0.5

Avg Penalty / Inspection

$1,225

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 0.5 violations per visit. That's $1,225 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$4,900

Current Penalty Amount

$2,450

Penalty Reduction

50.0%

What this shows Penalties were reduced by $2,450 from the initial assessment of $4,900. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tekweld Solution INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Tekweld Solution INC. Industry Avg
Inspections 2 2.6
Violations 1 8.0
Total Penalty $2,450 $15,763
Avg Penalty per Inspection $1,225 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tekweld Solution INC., both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,450 here).

Behringer Corporation $2,450 NJ Briese Iron Works INC $2,450 MN Structural Prestressed Industries, INC. $2,450 FL Interkal LLC DBA Interkal $2,450 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Silver Bay Seafoods, LLC 2 insp. False Pass, AK Precision Build Solutions, LLC 2 insp. Tampa, FL Carmen Creative Cabinet, L.L.C. 2 insp. Belton, TX Meglio Interiors, LLC 2 insp. Chamblee, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Behringer Corporation
Branchville, NJ
2 inspections $2,450
Briese Iron Works INC
Rochester, MN
2 inspections $2,450
Interkal LLC DBA Interkal
Kalamazoo, MI
3 inspections $2,450
Salem Hardwood Lumber Company
Salem, IN
3 inspections $2,450
Polycycle Industrial Products, INC.
Pittsburgh, PA
2 inspections $2,450

Compare Tekweld Solution INC. vs Behringer Corporation side-by-side →

What to do with this record

Use Tekweld Solution INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tekweld Solution INC. against Behringer Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tekweld Solution INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tekweld Solution INC. safe to work at? ▼
Based on OSHA records, Tekweld Solution INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tekweld Solution INC. have? ▼
Tekweld Solution INC. has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,450.
How many OSHA inspections has Tekweld Solution INC. had? ▼
Tekweld Solution INC. has had 2 OSHA inspections, with the first recorded on 2011-08-31 and the most recent on 2012-06-20. This averages 0.5 violations per inspection.
What is the total penalty amount for Tekweld Solution INC.? ▼
Tekweld Solution INC. has been assessed $2,450 in current OSHA penalties, reduced from an initial assessment of $4,900 (a 50.0% reduction).
Does Tekweld Solution INC. have any serious or willful violations? ▼
Yes. Tekweld Solution INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tekweld Solution INC. operate in? ▼
Tekweld Solution INC. operates in the Manufacturing sector (NAICS code 334111). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Tekweld Solution INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tekweld Solution INC. ranks #72,791 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tekweld Solution INC.'s safety record compare to industry average? ▼
Tekweld Solution INC.'s total OSHA penalty of $2,450 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Briese Iron Works INC in Rochester, MN is a similar manufacturing employer with $2,450 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.