PlainWorker
Employers › WI

Manufacturing · Nashotah, WI

Techniplas US, LLC

According to OSHA enforcement records (2010–2026), Techniplas US, LLC ranks #34,180 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 6 violations across 3 inspections.

Upper half by penalty67% serious
$10,262
OSHA penalties
6
Violations cited
3
OSHA inspections
#34,180
of 99,447 penalized employers

Techniplas US, LLC in Nashotah, WI has been the subject of 3 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $10,262. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Techniplas US, LLC 3 times over 2 years, roughly annually. These inspections resulted in 6 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #34,180 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Griffiths CO D/B/a Wrico Stamping CO. of Florida in Orlando, FL is another manufacturing employer with 2 OSHA inspections on record and $10,264 in current penalties.

2.0
violations per inspection
66.7%
of violations were serious
#34,180
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 6 violations across 3 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Techniplas US, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Techniplas US, LLC runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$10,262 Bottom 34% least affordable more affordable than 34% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Techniplas US, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.68.316.023.731.4OSHA inspectionsViolations citedJASPER DIMENSION LLC, OSHA inspections: 3 · Violations cited: 5T.S. UPSETTING & THR…, OSHA inspections: 3 · Violations cited: 11MSC WALBRIDGE COATIN…, OSHA inspections: 3 · Violations cited: 11CENTRAL FLORIDA CUST…, OSHA inspections: 3 · Violations cited: 27DIPAOLO BAKING CO., …, OSHA inspections: 3 · Violations cited: 10YASUFUKU USA, INC., OSHA inspections: 3 · Violations cited: 4EAST COAST REPAIR AN…, OSHA inspections: 3 · Violations cited: 13FOREST CITY TECHNOLO…, OSHA inspections: 3 · Violations cited: 11MILLER WIRE WORKS, I…, OSHA inspections: 3 · Violations cited: 15MIBA BEARINGS US, LLC, OSHA inspections: 3 · Violations cited: 15PLASTIC TRIM INTL INC, OSHA inspections: 3 · Violations cited: 30THE BOEING COMPANY, OSHA inspections: 3 · Violations cited: 2CATALINA CYLINDERS, …, OSHA inspections: 3 · Violations cited: 9BRADFORD MARINE, INC., OSHA inspections: 3 · Violations cited: 20CLW, INC., OSHA inspections: 3 · Violations cited: 6WILD CHERRY SPOON CO., OSHA inspections: 3 · Violations cited: 11HOMECREST OUTDOOR LI…, OSHA inspections: 3 · Violations cited: 14WAUPACA FOUNDRY INC, OSHA inspections: 3 · Violations cited: 12MARY'S GONE CRACKERS…, OSHA inspections: 3 · Violations cited: 7SEWELL PRODUCTS OF F…, OSHA inspections: 3 · Violations cited: 2Techniplas US, LLC, OSHA inspections: 3 · Violations cited: 6
Techniplas US, LLC has 3 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Techniplas US, LLC in the Manufacturing enforcement ledger

In Manufacturing, Techniplas US, LLC sits at penalty rank #15,473 of 35,243 penalized establishments ($10,262 assessed).

How Techniplas US, LLC Compares

Techniplas US, LLC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2023-05-23

Last Inspection

2025-09-15

Inspection Span

2 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$3,421

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 2.0 violations per visit. That's $3,421 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$18,988

Current Penalty Amount

$10,262

Penalty Reduction

46.0%

What this shows Penalties were reduced by $8,726 from the initial assessment of $18,988. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Techniplas US, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Techniplas US, LLC Industry Avg
Inspections 3 2.6
Violations 6 8.0
Total Penalty $10,262 $15,763
Avg Penalty per Inspection $3,421 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Techniplas US, LLC, both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($10,262 here).

Librestone Marble & Granite, LLC $10,262 CO Koenig-Stimens, INC. $10,263 MS Griffiths CO D/B/a Wrico Stamping CO. of Florida $10,264 FL European Cabinet MFG CO $10,260 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Jasper Dimension LLC 3 insp. Jasper, IN T.S. Upsetting & Threading Services, L.P. 3 insp. Houston, TX MSC Walbridge Coatings INC. 3 insp. Walbridge, OH Central Florida Custom Trailers, INC. 3 insp. Orlando, FL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Librestone Marble & Granite, LLC
Commerce City, CO
3 inspections $10,262
Koenig-Stimens, INC.
Kiln, MS
2 inspections $10,263
Griffiths CO D/B/a Wrico Stamping CO. of Florida
Orlando, FL
2 inspections $10,264
European Cabinet MFG CO
Roseville, MI
4 inspections $10,260
Specialty Piping Products, LLC
Theodore, AL
2 inspections $10,259

Compare Techniplas US, LLC vs Librestone Marble & Granite, LLC side-by-side →

What to do with this record

Use Techniplas US, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Techniplas US, LLC against Librestone Marble & Granite, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Techniplas US, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Techniplas US, LLC safe to work at? ▼
Based on OSHA records, Techniplas US, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 3 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Techniplas US, LLC have? ▼
Techniplas US, LLC has 6 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $10,262.
How many OSHA inspections has Techniplas US, LLC had? ▼
Techniplas US, LLC has had 3 OSHA inspections, with the first recorded on 2023-05-23 and the most recent on 2025-09-15. This averages 2.0 violations per inspection.
What is the total penalty amount for Techniplas US, LLC? ▼
Techniplas US, LLC has been assessed $10,262 in current OSHA penalties, reduced from an initial assessment of $18,988 (a 46.0% reduction).
Does Techniplas US, LLC have any serious or willful violations? ▼
Yes. Techniplas US, LLC has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Techniplas US, LLC operate in? ▼
Techniplas US, LLC operates in the Manufacturing sector (NAICS code 326199). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Techniplas US, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Techniplas US, LLC ranks #34,180 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Techniplas US, LLC's safety record compare to industry average? ▼
Techniplas US, LLC's total OSHA penalty of $10,262 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Griffiths CO D/B/a Wrico Stamping CO. of Florida in Orlando, FL is a similar manufacturing employer with $10,264 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.