PlainWorker
Employers › TX

Manufacturing · Mabank, TX

Techniform Metal Curving, INC.

According to OSHA enforcement records (2010–2026), Techniform Metal Curving, INC. ranks #29,711 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 19 violations across 3 inspections.

Upper half by penalty95% serious
$12,100
OSHA penalties
19
Violations cited
3
OSHA inspections
#29,711
of 99,447 penalized employers

Techniform Metal Curving, INC. in Mabank, TX has been the subject of 3 OSHA workplace inspections and 19 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $12,100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Techniform Metal Curving, INC. 3 times across a longer 14-year span, an infrequent cadence. These inspections resulted in 19 violations, averaging 6.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #29,711 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 18 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Van Wolf's LLC in Sacramento, CA is another manufacturing employer with 3 OSHA inspections on record and $12,100 in current penalties.

6.3
violations per inspection
94.7%
of violations were serious
#29,711
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 19 violations across 3 OSHA inspections (6.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Techniform Metal Curving, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Techniform Metal Curving, INC. runs moderately below peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$12,100 Bottom 30% least affordable more affordable than 30% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Techniform Metal Curving, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.510.518.526.534.5OSHA inspectionsViolations citedARYZTA, LLC, OSHA inspections: 3 · Violations cited: 4HAR-CONN CHROME COMP…, OSHA inspections: 3 · Violations cited: 28SILVER BAY SEAFOODS-…, OSHA inspections: 3 · Violations cited: 18JPC HOLDINGS, LLC, OSHA inspections: 3 · Violations cited: 9THE TALARIA COMPANY,…, OSHA inspections: 3 · Violations cited: 13GALAXY BALLOONS INC., OSHA inspections: 3 · Violations cited: 12SOUTHERN TEA, LLC, OSHA inspections: 3 · Violations cited: 15TENSION ENVELOPE CORP., OSHA inspections: 3 · Violations cited: 15MPI ENGINEERED TECHN…, OSHA inspections: 3 · Violations cited: 7JP LILLIS ENTERPRISE…, OSHA inspections: 3 · Violations cited: 33AMERICAN BLANCHING C…, OSHA inspections: 3 · Violations cited: 10OK FOODS, INC., OSHA inspections: 3 · Violations cited: 4RAWLINGS SPORTING GO…, OSHA inspections: 3 · Violations cited: 22AMERICAN STRUCTURAL …, OSHA inspections: 3 · Violations cited: 22KIT HOMEBUILDERS WES…, OSHA inspections: 3 · Violations cited: 12PKM STEEL SERVICE, I…, OSHA inspections: 3 · Violations cited: 8READING ALLOYS, INC., OSHA inspections: 3 · Violations cited: 8CALABRO CHEESE CORPO…, OSHA inspections: 3 · Violations cited: 4INFINITY SPECIALTY T…, OSHA inspections: 3 · Violations cited: 8DEVRO INC, OSHA inspections: 3 · Violations cited: 23Techniform Metal Cur…, OSHA inspections: 3 · Violations cited: 19
Techniform Metal Curving, INC. has 3 OSHA inspections on record and 19 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Techniform Metal Curving, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Techniform Metal Curving, INC. is the #13,674 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($12,100).

How Techniform Metal Curving, INC. Compares

Techniform Metal Curving, INC.'s 6.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-11-29

Last Inspection

2026-06-12

Inspection Span

14 yrs

Violations / Inspection

6.3

Avg Penalty / Inspection

$4,033

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 14 years, averaging 6.3 violations per visit. That's $4,033 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

18

Serious

94.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

5.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$65,100

Current Penalty Amount

$12,100

Penalty Reduction

81.4%

What this shows Penalties were reduced by $53,000 from the initial assessment of $65,100. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Techniform Metal Curving, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Techniform Metal Curving, INC. Industry Avg
Inspections 3 2.6
Violations 19 8.0
Total Penalty $12,100 $15,763
Avg Penalty per Inspection $4,033 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Techniform Metal Curving, INC., both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($12,100 here).

Great Dane Powder Coating, INC. $12,100 PA Keystone Profiles, LTD $12,100 PA Los Angeles Lighting Manufacturing Company Incorporated $12,100 CA Van Wolf's LLC $12,100 CA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Aryzta, LLC 3 insp. San Leandro, CA Har-Conn Chrome Company 3 insp. West Hartford, CT Silver Bay Seafoods-Kodiak, LLC 3 insp. Kodiak, AK JPC Holdings, LLC 3 insp. Trenton, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Great Dane Powder Coating, INC.
Loyalhanna, PA
3 inspections $12,100
Keystone Profiles, LTD
Beaver Falls, PA
3 inspections $12,100
Los Angeles Lighting Manufacturing Company Incorporated
El Monte, CA
2 inspections $12,100
Van Wolf's LLC
Sacramento, CA
3 inspections $12,100
Chibatterysystems LLC
Chicago Heights, IL
2 inspections $12,100

Compare Techniform Metal Curving, INC. vs Great Dane Powder Coating, INC. side-by-side →

What to do with this record

Use Techniform Metal Curving, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Techniform Metal Curving, INC. against Great Dane Powder Coating, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Techniform Metal Curving, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Techniform Metal Curving, INC. safe to work at? ▼
Based on OSHA records, Techniform Metal Curving, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 19 violations across 3 inspections, including 18 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Techniform Metal Curving, INC. have? ▼
Techniform Metal Curving, INC. has 19 OSHA violations on record, including 18 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $12,100.
How many OSHA inspections has Techniform Metal Curving, INC. had? ▼
Techniform Metal Curving, INC. has had 3 OSHA inspections, with the first recorded on 2012-11-29 and the most recent on 2026-06-12. This averages 6.3 violations per inspection.
What is the total penalty amount for Techniform Metal Curving, INC.? ▼
Techniform Metal Curving, INC. has been assessed $12,100 in current OSHA penalties, reduced from an initial assessment of $65,100 (a 81.4% reduction).
Does Techniform Metal Curving, INC. have any serious or willful violations? ▼
Yes. Techniform Metal Curving, INC. has 18 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Techniform Metal Curving, INC. operate in? ▼
Techniform Metal Curving, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Techniform Metal Curving, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Techniform Metal Curving, INC. ranks #29,711 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Techniform Metal Curving, INC.'s safety record compare to industry average? ▼
Techniform Metal Curving, INC.'s total OSHA penalty of $12,100 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Van Wolf's LLC in Sacramento, CA is a similar manufacturing employer with $12,100 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.