Manufacturing · Rogers, MN

Tavis Metal and Fabrication

According to OSHA enforcement records (2010–2026), Tavis Metal and Fabrication has a mixed safety record: 6 violations across 2 inspections. See the full breakdown below.

Lower half by penalty67% serious
$1,810
OSHA penalties
6
Violations cited
2
OSHA inspections
#78,926
of 100,495 penalized employers

Tavis Metal and Fabrication in Rogers, MN has been the subject of 2 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,810. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tavis Metal and Fabrication 2 times over 1 year - more than twice a year on average. These inspections resulted in 6 violations, averaging 3.0 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Electro Industries INC in Monticello, MN is another manufacturing employer with 2 OSHA inspections on record and $1,810 in current penalties.

3.0
violations per inspection
66.7%
of violations were serious
21%
of penalized employers rank lower

How Tavis Metal and Fabrication compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tavis Metal and Fabrication runs well below peers (0.12x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,810 Top 21% most affordable more affordable than 79% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Tavis Metal and Fabrication

The federal enforcement record for Tavis Metal and Fabrication in Rogers, MN includes 2 OSHA inspections and 6 violations, translating to 3.00 violations per inspection. Of those violations, 4 (66.7%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $2,050 in initial penalties against this employer, later adjusted to a current total of $1,810 - a 11.7% reduction. Average penalty per inspection works out to $905. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.12x the sector average).

Inspection activity spans from 2011-02-15 to 2012-03-19, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-02-15

Last Inspection

2012-03-19

Inspection Span

1 yr

Violations / Inspection

3.0

Avg Penalty / Inspection

$905

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 3.0 violations per visit. That's $905 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

4

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,050

Current Penalty Amount

$1,810

Penalty Reduction

11.7%

What this shows Penalties were reduced by $240 from the initial assessment of $2,050. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Tavis Metal and Fabrication compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Tavis Metal and Fabrication Industry Avg
Inspections 2 2.5
Violations 6 7.8
Total Penalty $1,810 $15,410
Avg Penalty per Inspection $905 $6,092

Nearby & Similar Employers in Manufacturing

Compare Tavis Metal and Fabrication vs Electro Industries INC side-by-side →

Frequently Asked Questions

Is Tavis Metal and Fabrication safe to work at?
Based on OSHA records, Tavis Metal and Fabrication's workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 2 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tavis Metal and Fabrication have?
Tavis Metal and Fabrication has 6 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,810.
How many OSHA inspections has Tavis Metal and Fabrication had?
Tavis Metal and Fabrication has had 2 OSHA inspections, with the first recorded on 2011-02-15 and the most recent on 2012-03-19. This averages 3.0 violations per inspection.
What is the total penalty amount for Tavis Metal and Fabrication?
Tavis Metal and Fabrication has been assessed $1,810 in current OSHA penalties, reduced from an initial assessment of $2,050 (a 11.7% reduction).
Does Tavis Metal and Fabrication have any serious or willful violations?
Yes. Tavis Metal and Fabrication has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tavis Metal and Fabrication operate in?
Tavis Metal and Fabrication operates in the Manufacturing sector (NAICS code 332710). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Tavis Metal and Fabrication's safety record compare to industry average?
Tavis Metal and Fabrication's total OSHA penalty of $1,810 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Electro Industries INC in Monticello, MN is a similar manufacturing employer with $1,810 in current penalties.

Explore PlainWorker

What to check next

Tavis Metal and Fabrication's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.