PlainWorker
Employers › MI

Manufacturing · Sterling Heights, MI

Tarus Products INC

According to OSHA enforcement records (2010–2026), Tarus Products INC ranks #79,405 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 3 inspections.

Lower half by penalty20% serious
$1,700
OSHA penalties
5
Violations cited
3
OSHA inspections
#79,405
of 99,447 penalized employers

Tarus Products INC in Sterling Heights, MI has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,700. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tarus Products INC 3 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 5 violations, averaging 1.7 per inspection. According to OSHA enforcement records, its total current penalty ranks #79,405 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Kotzian Tool INC in Shelby, MI is another manufacturing employer with 2 OSHA inspections on record and $1,700 in current penalties.

1.7
violations per inspection
20.0%
of violations were serious
#79,405
of 99,447 penalized employers

Compliance score

C 66/100
  • C OSHA safety compliance: 5 violations across 3 OSHA inspections (1.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Tarus Products INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Tarus Products INC runs well below peers (0.11x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,700 Top 20% most affordable more affordable than 80% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tarus Products INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0017.334.651.969.2OSHA inspectionsViolations citedHUSQVARNA CONSUMER O…, OSHA inspections: 3 · Violations cited: 66LOGOPLASTE, LLC, OSHA inspections: 3 · Violations cited: 10BCI ACRYLIC, INC., OSHA inspections: 3 · Violations cited: 9REYES AUTOMOTIVE GRO…, OSHA inspections: 3 · Violations cited: 20TRANE TECHNOLOGIES C…, OSHA inspections: 3 · Violations cited: 3CUTLER HAMMER ELECTR…, OSHA inspections: 3 · Violations cited: 25A&B PRECISION METALS…, OSHA inspections: 3 · Violations cited: 8STEVEN-ROBERT ORIGIN…, OSHA inspections: 3 · Violations cited: 7AHF PRODUCTS, OSHA inspections: 3 · Violations cited: 6BREAD PARTNERS, INC., OSHA inspections: 3 · Violations cited: 22ARCHER-DANIELS-MIDLA…, OSHA inspections: 3 · Violations cited: 10SOLAR PRODUCTS INC, OSHA inspections: 3 · Violations cited: 6M & E MFG. CO., INC., OSHA inspections: 3 · Violations cited: 15BELTSERVICE CORPORAT…, OSHA inspections: 3 · Violations cited: 5MIDNIGHT EXPRESS POW…, OSHA inspections: 3 · Violations cited: 9STONE CONCEPTS INC., OSHA inspections: 3 · Violations cited: 12CHILLICOTHE METAL CO…, OSHA inspections: 3 · Violations cited: 5JULIET MARIE PERRY, OSHA inspections: 3 · Violations cited: 6PROAMPAC HOLDINGS LLC, OSHA inspections: 3 · Violations cited: 5INTEGRICO COMPOSITES, OSHA inspections: 3 · Violations cited: 7Tarus Products INC, OSHA inspections: 3 · Violations cited: 5
Tarus Products INC has 3 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tarus Products INC in the Manufacturing enforcement ledger

Manufacturing sector: Tarus Products INC is the #30,509 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($1,700).

How Tarus Products INC Compares

Tarus Products INC's 1.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.11x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-07-07

Last Inspection

2025-09-02

Inspection Span

10 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$567

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 10 years, averaging 1.7 violations per visit. That's $567 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

20.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

80.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,700

Current Penalty Amount

$1,700

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Tarus Products INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Tarus Products INC Industry Avg
Inspections 3 2.6
Violations 5 8.0
Total Penalty $1,700 $15,763
Avg Penalty per Inspection $567 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tarus Products INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($1,700 here).

Yoshino America Corporation $1,700 IL Thompson Metal Fab, INC. $1,700 OK Pepsi Beverages CO. $1,700 RI Hertco Kitchens LLC $1,700 WA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Husqvarna Consumer Outdoor Products N a INC 3 insp. Orangeburg, SC Logoplaste, LLC 3 insp. Kansas City, MO Bci Acrylic, INC. 3 insp. Libertyville, IL Reyes Automotive Group, LLC 3 insp. San Antonio, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Kotzian Tool INC
Shelby, MI
2 inspections $1,700
Northern Steel Services LLC
Montrose, MI
2 inspections $1,700
Tracker Marine Group
Lebanon, MO
4 inspections $1,700
Dickinson Homes INC
Kingsford, MI
3 inspections $1,700
Quincy MFG LLC
Calumet, MI
2 inspections $1,700

Compare Tarus Products INC vs Kotzian Tool INC side-by-side →

What to do with this record

Use Tarus Products INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tarus Products INC against Kotzian Tool INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tarus Products INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tarus Products INC safe to work at? ▼
Based on OSHA records, Tarus Products INC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tarus Products INC have? ▼
Tarus Products INC has 5 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,700.
How many OSHA inspections has Tarus Products INC had? ▼
Tarus Products INC has had 3 OSHA inspections, with the first recorded on 2015-07-07 and the most recent on 2025-09-02. This averages 1.7 violations per inspection.
What is the total penalty amount for Tarus Products INC? ▼
Tarus Products INC has been assessed $1,700 in current OSHA penalties.
Does Tarus Products INC have any serious or willful violations? ▼
Yes. Tarus Products INC has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tarus Products INC operate in? ▼
Tarus Products INC operates in the Manufacturing sector (NAICS code 333517). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Tarus Products INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tarus Products INC ranks #79,405 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tarus Products INC's safety record compare to industry average? ▼
Tarus Products INC's total OSHA penalty of $1,700 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Kotzian Tool INC in Shelby, MI is a similar manufacturing employer with $1,700 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.