PlainWorker
Employers › MD

Construction · Odenton, MD

Tarek Mohamed DBA T M Welding Ironworks L L C

According to OSHA enforcement records (2010–2026), Tarek Mohamed DBA T M Welding Ironworks L L C has a concerning safety record: 14 violations across 2 inspections. See the full breakdown below.

Lower half by penalty50% serious
$3,499
OSHA penalties
14
Violations cited
2
OSHA inspections
#65,685
of 100,495 penalized employers

Tarek Mohamed DBA T M Welding Ironworks L L C in Odenton, MD has been the subject of 2 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,499. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tarek Mohamed DBA T M Welding Ironworks L L C 2 times over 1 year - more than twice a year on average. These inspections resulted in 14 violations, averaging 7.0 per inspection - a notably high rate. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Whittenberg Construction CO. in Indianapolis, IN is another construction employer with 2 OSHA inspections on record and $3,500 in current penalties.

7.0
violations per inspection
50.0%
of violations were serious
35%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows Tarek Mohamed DBA T M Welding Ironworks L L C runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,499 Top 35% most affordable more affordable than 65% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Tarek Mohamed DBA T M Welding Ironworks L L C

The federal enforcement record for Tarek Mohamed DBA T M Welding Ironworks L L C in Odenton, MD includes 2 OSHA inspections and 14 violations, translating to 7.00 violations per inspection. Of those violations, 7 (50.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $3,499 in initial penalties against this employer, later adjusted to a current total of $3,499 - no reduction from the original assessment. Average penalty per inspection works out to $1,750. Against the Construction industry average of $6,751 per employer, this record runs moderately below peers (0.5x the sector average).

Inspection activity spans from 2012-03-22 to 2012-03-27, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-03-22

Last Inspection

2012-03-27

Inspection Span

1 yr

Violations / Inspection

7.0

Avg Penalty / Inspection

$1,750

Industry Avg / Inspection

$3,361

What this shows 2 inspections over 1 year, averaging 7.0 violations per visit. That's $1,750 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

7

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

7

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,499

Current Penalty Amount

$3,499

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Construction

How Tarek Mohamed DBA T M Welding Ironworks L L C compares to the Construction sector, which has 61,413 employers tracked by PlainWorker.

Metric Tarek Mohamed DBA T M Welding Ironworks L L C Industry Avg
Inspections 2 2.0
Violations 14 3.3
Total Penalty $3,499 $6,751
Avg Penalty per Inspection $1,750 $3,361
View all 61,413 employers in Construction →

Nearby & Similar Employers in Construction

Morcom Construction Co
Chicago, IL
0 inspections $0
C&M General Contracting INC.
New York, NY
2 inspections $3,500
Whittenberg Construction CO.
Indianapolis, IN
2 inspections $3,500
The Snyder Construction Company, LLC.
South Burlington, VT
2 inspections $3,500
Pompei, INC.
Norfolk, VA
3 inspections $3,498

Compare Tarek Mohamed DBA T M Welding Ironworks L L C vs Morcom Construction Co side-by-side →

Frequently Asked Questions

Is Tarek Mohamed DBA T M Welding Ironworks L L C safe to work at? ▼
Based on OSHA records, Tarek Mohamed DBA T M Welding Ironworks L L C's workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 2 inspections, including 7 serious violations. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tarek Mohamed DBA T M Welding Ironworks L L C have? ▼
Tarek Mohamed DBA T M Welding Ironworks L L C has 14 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,499.
How many OSHA inspections has Tarek Mohamed DBA T M Welding Ironworks L L C had? ▼
Tarek Mohamed DBA T M Welding Ironworks L L C has had 2 OSHA inspections, with the first recorded on 2012-03-22 and the most recent on 2012-03-27. This averages 7.0 violations per inspection.
What is the total penalty amount for Tarek Mohamed DBA T M Welding Ironworks L L C? ▼
Tarek Mohamed DBA T M Welding Ironworks L L C has been assessed $3,499 in current OSHA penalties.
Does Tarek Mohamed DBA T M Welding Ironworks L L C have any serious or willful violations? ▼
Yes. Tarek Mohamed DBA T M Welding Ironworks L L C has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tarek Mohamed DBA T M Welding Ironworks L L C operate in? ▼
Tarek Mohamed DBA T M Welding Ironworks L L C operates in the Construction sector (NAICS code 238190). This industry has 61,413 employers tracked by PlainWorker, with 123,350 total OSHA inspections and $414.57M in cumulative penalties.
How does Tarek Mohamed DBA T M Welding Ironworks L L C's safety record compare to industry average? ▼
Tarek Mohamed DBA T M Welding Ironworks L L C's total OSHA penalty of $3,499 is below the Construction industry average of $6,751 per employer. The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Whittenberg Construction CO. in Indianapolis, IN is a similar construction employer with $3,500 in current penalties.

Explore PlainWorker

Construction Industry

All 61,413 employers in this sector
Employers in MD

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Tarek Mohamed DBA T M Welding Ironworks L L C's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

  • See how Tarek Mohamed DBA T M Welding Ironworks L L C compares to the 61,413 other employers in Construction. Construction record
  • Put this employer head-to-head with another on inspections, penalties, and back wages. Compare employers
  • Review the full OSHA & wage-enforcement picture for MD. MD state record

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.