Professional & Technical Services · Farmington Hills, MI

Tachi-S Engineering USA INC

According to OSHA enforcement records (2010–2026), Tachi-S Engineering USA INC ranks #68,989 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 12 violations across 3 inspections.

Lower half by penalty58% serious
$2,925
OSHA penalties
12
Violations cited
3
OSHA inspections
#68,989
of 99,447 penalized employers

Tachi-S Engineering USA INC in Farmington Hills, MI has been the subject of 3 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,925. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Tachi-S Engineering USA INC 3 times across a longer 11-year span, an infrequent cadence. These inspections resulted in 12 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #68,989 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Professional & Technical Services industry average of 1 inspections per employer, this runs far above peers (5.2x the sector average) on inspection frequency. For comparison, Techtu Business Solutions, Inc in Pleasanton, CA is another professional & technical services employer with 0 OSHA inspections on record and $0 in current penalties.

4.0
violations per inspection
58.3%
of violations were serious
#68,989
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 12 violations across 3 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Tachi-S Engineering USA INC compares on OSHA penalties

Total current penalty vs the Professional & Technical Services per-employer average

in penalties

What this shows Tachi-S Engineering USA INC runs well above peers (2.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,925 Top 31% most affordable more affordable than 69% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Professional & Technical Services employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Tachi-S Engineering USA INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.005.310.515.821OSHA inspectionsViolations citedST GEORGE DISTRIBUTI…, OSHA inspections: 3 · Violations cited: 7GOTHIC LANDSCAPING, …, OSHA inspections: 3 · Violations cited: 5NOAA NATIONAL WEATHE…, OSHA inspections: 3 · Violations cited: 10IDEXX DISTRIBUTION, …, OSHA inspections: 3 · Violations cited: 7QUANTA COMPUTER USA,…, OSHA inspections: 3 · Violations cited: 10WASHAKIE RENEWABLE E…, OSHA inspections: 3 · Violations cited: 8QUANTA POWER GENERAT…, OSHA inspections: 3 · Violations cited: 16JT LOGISTICS SOLUTIO…, OSHA inspections: 3 · Violations cited: 3BROOKS GRAY SIGN CO …, OSHA inspections: 3 · Violations cited: 4AECOM TECHNOLOGY COR…, OSHA inspections: 3 · Violations cited: 3TALLEY SIGN COMPANY, OSHA inspections: 3 · Violations cited: 9ENCO PHARMACEUTICAL …, OSHA inspections: 3 · Violations cited: 6CA EMPLOYMENT DEVELO…, OSHA inspections: 3 · Violations cited: 0MIDORI GARDENS, OSHA inspections: 3 · Violations cited: 2STERI-TECH INC, OSHA inspections: 3 · Violations cited: 20US DEPARTMENT OF COM…, OSHA inspections: 3 · Violations cited: 19APPLE INC., OSHA inspections: 3 · Violations cited: 0GEN-CAP INDUSTRIES, …, OSHA inspections: 3 · Violations cited: 4ALASKAN CONSTRUCTION…, OSHA inspections: 3 · Violations cited: 1NCDHHS, STATE LABORA…, OSHA inspections: 3 · Violations cited: 1Tachi-S Engineering …, OSHA inspections: 3 · Violations cited: 12
Tachi-S Engineering USA INC has 3 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Professional & Technical Services peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Tachi-S Engineering USA INC in the Professional & Technical Services enforcement ledger

In Professional & Technical Services, Tachi-S Engineering USA INC sits at penalty rank #304 of 509 penalized establishments ($2,925 assessed).

How Tachi-S Engineering USA INC Compares

Tachi-S Engineering USA INC's 4.00 violations per inspection compares to the Professional & Technical Services sector average of 1.2 violations per employer.

Against the Professional & Technical Services industry average of $1,358 per employer, this employer's current OSHA penalty runs well above peers (2.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-02-24

Last Inspection

2025-04-10

Inspection Span

11 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$975

Industry Avg / Inspection

$2,331

What this shows 3 inspections over 11 years, averaging 4.0 violations per visit. That's $975 per inspection vs. the Professional & Technical Services average of $2,331.

Enforcement detail

Violation Breakdown

7

Serious

58.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

41.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,850

Current Penalty Amount

$2,925

Penalty Reduction

50.0%

What this shows Penalties were reduced by $2,925 from the initial assessment of $5,850. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Professional & Technical Services

How Tachi-S Engineering USA INC compares to the Professional & Technical Services sector, which has 3,597 employers tracked by PlainWorker.

Metric Tachi-S Engineering USA INC Industry Avg
Inspections 3 0.6
Violations 12 1.2
Total Penalty $2,925 $1,358
Avg Penalty per Inspection $975 $2,331

Nationwide Professional & Technical Services peers with similar penalties or inspection counts

Two OSHA-record peer sets for Tachi-S Engineering USA INC, both outside MI so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Professional & Technical Services

Showing 5 of 3596 other employers tracked in this sector.

Compare Tachi-S Engineering USA INC vs Teamwork Human Resources INC. side-by-side →

What to do with this record

Use Tachi-S Engineering USA INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Tachi-S Engineering USA INC against Teamwork Human Resources INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Tachi-S Engineering USA INC's inspection and penalty record is typical for Professional & Technical Services or an outlier against the sector's own average. View the Professional & Technical Services sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Tachi-S Engineering USA INC safe to work at?
Based on OSHA records, Tachi-S Engineering USA INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 3 inspections, including 7 serious violations. Compared to Professional & Technical Services industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Tachi-S Engineering USA INC have?
Tachi-S Engineering USA INC has 12 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,925.
How many OSHA inspections has Tachi-S Engineering USA INC had?
Tachi-S Engineering USA INC has had 3 OSHA inspections, with the first recorded on 2014-02-24 and the most recent on 2025-04-10. This averages 4.0 violations per inspection.
What is the total penalty amount for Tachi-S Engineering USA INC?
Tachi-S Engineering USA INC has been assessed $2,925 in current OSHA penalties, reduced from an initial assessment of $5,850 (a 50.0% reduction).
Does Tachi-S Engineering USA INC have any serious or willful violations?
Yes. Tachi-S Engineering USA INC has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Tachi-S Engineering USA INC operate in?
Tachi-S Engineering USA INC operates in the Professional & Technical Services sector (NAICS code 541330). This industry has 3,597 employers tracked by PlainWorker, with 2,095 total OSHA inspections and $4.88M in cumulative penalties.
Where does Tachi-S Engineering USA INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Tachi-S Engineering USA INC ranks #68,989 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Tachi-S Engineering USA INC's safety record compare to industry average?
Tachi-S Engineering USA INC's total OSHA penalty of $2,925 is above the Professional & Technical Services industry average of $1,358 per employer (2.2x the average). The employer has 3 inspections compared to the industry average of 0.6 per employer. For a direct comparison, Techtu Business Solutions, Inc in Pleasanton, CA is a similar professional & technical services employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.