PlainWorker
Employers › MI

Manufacturing · Spring Lake, MI

Supreme Machined Products

According to OSHA enforcement records (2010–2026), Supreme Machined Products has a relatively clean safety record: 0 violations across 3 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
3
OSHA inspections

Supreme Machined Products in Spring Lake, MI has been the subject of 3 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Supreme Machined Products 3 times over 1 year - more than twice a year on average. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Multiquip, INC. DBA MQ Whiteman in Boise, ID is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 3 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Supreme Machined Products.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0018.436.855.173.5OSHA inspectionsViolations citedBUSHNELL ILLINOIS TA…, OSHA inspections: 3 · Violations cited: 35SPRINGCO METAL COATI…, OSHA inspections: 3 · Violations cited: 14CUISINE SOLUTIONS SA…, OSHA inspections: 3 · Violations cited: 9ARRINGTON SAWMILL, I…, OSHA inspections: 3 · Violations cited: 24EDAC TECHNOLOGIES CO…, OSHA inspections: 3 · Violations cited: 70MARATHON GALVESTON B…, OSHA inspections: 3 · Violations cited: 6BRIGGS & STRATTON CO…, OSHA inspections: 3 · Violations cited: 8SOUTHERN CALIFORNIA …, OSHA inspections: 3 · Violations cited: 17SELMA PALLET INC, OSHA inspections: 3 · Violations cited: 4GENERAL PLASTIC EXTR…, OSHA inspections: 3 · Violations cited: 18SORRENTO LACTALIS, I…, OSHA inspections: 3 · Violations cited: 18GENERAL ALUM NEW ENG…, OSHA inspections: 3 · Violations cited: 8CARLISLE PACKAGING C…, OSHA inspections: 3 · Violations cited: 13HDT EXPEDITIONARY SY…, OSHA inspections: 3 · Violations cited: 5WILLIAM H. HARVEY, OSHA inspections: 3 · Violations cited: 12PRECISION METAL PROD…, OSHA inspections: 3 · Violations cited: 18U.S. NONWOVENS CORP., OSHA inspections: 3 · Violations cited: 4HOHMANN & BARNARD, …, OSHA inspections: 3 · Violations cited: 3GSF PLASTICS CORPORA…, OSHA inspections: 3 · Violations cited: 11PRECISION IRON WORKS…, OSHA inspections: 3 · Violations cited: 31Supreme Machined Pro…, OSHA inspections: 3 · Violations cited: 0
Supreme Machined Products has 3 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Supreme Machined Products Compares

3 OSHA inspections on record for Supreme Machined Products in Spring Lake, MI, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Supreme Machined Products to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-03-23

Last Inspection

2016-08-22

Inspection Span

1 yr

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Industry Safety Context: Manufacturing

How Supreme Machined Products compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Supreme Machined Products Industry Avg
Inspections 3 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Supreme Machined Products, both outside MI so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Bushnell Illinois Tank CO. D/B/a Schuld/Bushnell 3 insp. Valley, NE Springco Metal Coatings INC. 3 insp. Cleveland, OH Cuisine Solutions San Antonio 3 insp. San Antonio, TX Arrington Sawmill, INC. 3 insp. Jacksonville, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Phelps Dodge Refining Corporation
El Paso, TX
3 inspections $0
NC Stone
San Jose, CA
2 inspections $0
Corning Incorporated
Midland, NC
2 inspections $0
Multiquip, INC. DBA MQ Whiteman
Boise, ID
2 inspections $0
Bowman Manufacturing NW
Post Falls, ID
2 inspections $0

Compare Supreme Machined Products vs Phelps Dodge Refining Corporation side-by-side →

What to do with this record

Use Supreme Machined Products's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Supreme Machined Products against Phelps Dodge Refining Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Supreme Machined Products's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Supreme Machined Products safe to work at? ▼
Based on OSHA records, Supreme Machined Products's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Supreme Machined Products have? ▼
Supreme Machined Products has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Supreme Machined Products had? ▼
Supreme Machined Products has had 3 OSHA inspections, with the first recorded on 2015-03-23 and the most recent on 2016-08-22. This averages 0.0 violations per inspection.
What is the total penalty amount for Supreme Machined Products? ▼
Supreme Machined Products has been assessed $0 in current OSHA penalties.
What industry does Supreme Machined Products operate in? ▼
Supreme Machined Products operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Supreme Machined Products's safety record compare to industry average? ▼
Supreme Machined Products's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Multiquip, INC. DBA MQ Whiteman in Boise, ID is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.