PlainWorker
Employers › TX

Manufacturing · Fort Worth, TX

Structural and Steel Products

According to OSHA enforcement records (2010–2026), Structural and Steel Products ranks #11,149 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 11 violations across 4 inspections.

Top 25% by penalty45% serious
$28,810
OSHA penalties
11
Violations cited
4
OSHA inspections
#11,149
of 99,447 penalized employers

Structural and Steel Products in Fort Worth, TX has been the subject of 4 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $28,810. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on Structural and Steel Products: 4 inspections in 1 year, several times a year. These inspections resulted in 11 violations, averaging 2.8 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #11,149 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Ingram Readymix, INC. in San Antonio, TX is another manufacturing employer with 3 OSHA inspections on record and $28,800 in current penalties.

2.8
violations per inspection
45.5%
of violations were serious
#11,149
of 99,447 penalized employers

Compliance score

D 50/100
  • D OSHA safety compliance: 11 violations across 4 OSHA inspections (2.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Structural and Steel Products compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Structural and Steel Products runs moderately above peers (1.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$28,810 Bottom 11% least affordable more affordable than 11% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Structural and Steel Products.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.009.418.928.337.8OSHA inspectionsViolations citedSUPER-PUFFT SNACKS U…, OSHA inspections: 4 · Violations cited: 36MADIX, INC, OSHA inspections: 4 · Violations cited: 1PACCAR INC., OSHA inspections: 4 · Violations cited: 7PREMIUM IOWA PORK, LLC, OSHA inspections: 4 · Violations cited: 9ENLIGHT GROUP II LLC, OSHA inspections: 4 · Violations cited: 8QUALITY MACHINING, LLC, OSHA inspections: 4 · Violations cited: 26KONKEL CUSTOM WOODWO…, OSHA inspections: 4 · Violations cited: 33WHITEHALL SPECIALTIE…, OSHA inspections: 4 · Violations cited: 11JOHNS MANVILLE, OSHA inspections: 4 · Violations cited: 3CONOCO PHILLIPS, OSHA inspections: 4 · Violations cited: 6FALSTROM COMPANY INC…, OSHA inspections: 4 · Violations cited: 17PRAXAIR DISTRIBUTION…, OSHA inspections: 4 · Violations cited: 15WEST WOOD PRODUCTS, …, OSHA inspections: 4 · Violations cited: 18MEDICO INDUSTRIES IN…, OSHA inspections: 4 · Violations cited: 30ARISING INDUSTRIES, …, OSHA inspections: 4 · Violations cited: 19WARRICK NEWCO LLC, OSHA inspections: 4 · Violations cited: 6USG INTERIORS LLC, OSHA inspections: 4 · Violations cited: 7REILLY PLATING COMPA…, OSHA inspections: 4 · Violations cited: 11CHEVRON U.S.A. INC., OSHA inspections: 4 · Violations cited: 2ARGO PRODUCTS COMPANY, OSHA inspections: 4 · Violations cited: 10Structural and Steel…, OSHA inspections: 4 · Violations cited: 11
Structural and Steel Products has 4 OSHA inspections on record and 11 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Structural and Steel Products in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Structural and Steel Products ranks #5,526 at $28,810 current penalty.

How Structural and Steel Products Compares

Structural and Steel Products's 2.75 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2015-11-19

Last Inspection

2017-05-02

Inspection Span

1 yr

Violations / Inspection

2.8

Avg Penalty / Inspection

$7,203

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 1 year, averaging 2.8 violations per visit. That's $7,203 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

45.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

54.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$40,458

Current Penalty Amount

$28,810

Penalty Reduction

28.8%

What this shows Penalties were reduced by $11,648 from the initial assessment of $40,458. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Structural and Steel Products compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Structural and Steel Products Industry Avg
Inspections 4 2.6
Violations 11 8.0
Total Penalty $28,810 $15,763
Avg Penalty per Inspection $7,203 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Structural and Steel Products, both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($28,810 here).

National Diversified Sales, INC. $28,810 CA Telfair Forest Products, LLC $28,815 GA PMX Industries, INC. $28,800 IA Colors for Plastics, INC. $28,800 IL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Super-Pufft Snacks USA, INC. 4 insp. Perry, FL Madix, INC 4 insp. Eclectic, AL Paccar INC. 4 insp. Chillicothe, OH Premium Iowa Pork, LLC 4 insp. Hospers, IA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

National Diversified Sales, INC.
Lindsay, CA
4 inspections $28,810
Telfair Forest Products, LLC
Lumber City, GA
7 inspections $28,815
PMX Industries, INC.
Cedar Rapids, IA
10 inspections $28,800
Ingram Readymix, INC.
San Antonio, TX
3 inspections $28,800
Colors for Plastics, INC.
Elk Grove Village, IL
6 inspections $28,800

Compare Structural and Steel Products vs National Diversified Sales, INC. side-by-side →

What to do with this record

Use Structural and Steel Products's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Structural and Steel Products against National Diversified Sales, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Structural and Steel Products's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Structural and Steel Products safe to work at? ▼
Based on OSHA records, Structural and Steel Products's workplace safety record is mixed, with some compliance concerns. The employer has 11 violations across 4 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Structural and Steel Products have? ▼
Structural and Steel Products has 11 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $28,810.
How many OSHA inspections has Structural and Steel Products had? ▼
Structural and Steel Products has had 4 OSHA inspections, with the first recorded on 2015-11-19 and the most recent on 2017-05-02. This averages 2.8 violations per inspection.
What is the total penalty amount for Structural and Steel Products? ▼
Structural and Steel Products has been assessed $28,810 in current OSHA penalties, reduced from an initial assessment of $40,458 (a 28.8% reduction).
Does Structural and Steel Products have any serious or willful violations? ▼
Yes. Structural and Steel Products has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Structural and Steel Products operate in? ▼
Structural and Steel Products operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Structural and Steel Products rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Structural and Steel Products ranks #11,149 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Structural and Steel Products's safety record compare to industry average? ▼
Structural and Steel Products's total OSHA penalty of $28,810 is above the Manufacturing industry average of $15,763 per employer (1.8x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Ingram Readymix, INC. in San Antonio, TX is a similar manufacturing employer with $28,800 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.