PlainWorker
Employers › MI

Manufacturing · Sterling Heights, MI

Sterling Metal Works DBA Liberty Cast Products LLC

According to OSHA enforcement records (2010–2026), Sterling Metal Works DBA Liberty Cast Products LLC ranks #33,361 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 36 violations across 7 inspections.

Upper half by penalty58% serious
$10,600
OSHA penalties
36
Violations cited
7
OSHA inspections
#33,361
of 99,447 penalized employers

Sterling Metal Works DBA Liberty Cast Products LLC in Sterling Heights, MI has been the subject of 7 OSHA workplace inspections and 36 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $10,600. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Sterling Metal Works DBA Liberty Cast Products LLC 7 times over 8 years, roughly once every couple of years. These inspections resulted in 36 violations, averaging 5.1 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #33,361 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 21 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.7x the sector average) on inspection frequency. For comparison, Cobalt Truck Equipment in Las Vegas, NV is another manufacturing employer with 4 OSHA inspections on record and $10,600 in current penalties.

5.1
violations per inspection
58.3%
of violations were serious
#33,361
of 99,447 penalized employers

Compliance score

F 15/100
  • F OSHA safety compliance: 36 violations across 7 OSHA inspections (5.1 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Sterling Metal Works DBA Liberty Cast Products LLC runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$10,600 Bottom 34% least affordable more affordable than 34% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Sterling Metal Works DBA Liberty Cast Products LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both7.07.077.07.0010.220.530.741.0OSHA inspectionsViolations citedCOOPER TIRE & RUBBER…, OSHA inspections: 7 · Violations cited: 26E-PAK MANUFACTURING,…, OSHA inspections: 7 · Violations cited: 29HARRISON POULTRY, INC., OSHA inspections: 7 · Violations cited: 16CINAO, OSHA inspections: 7 · Violations cited: 0PYRAMID MOUNTAIN LUM…, OSHA inspections: 7 · Violations cited: 15AMERICAN NONWOVENS, …, OSHA inspections: 7 · Violations cited: 25FERGUSON PRODUCTION …, OSHA inspections: 7 · Violations cited: 17JENNIE-O TURKEY STOR…, OSHA inspections: 7 · Violations cited: 6AMERIPEC INC., OSHA inspections: 7 · Violations cited: 22GULF CABLE, LLC, OSHA inspections: 7 · Violations cited: 19RC FAMILY WOOD PRODU…, OSHA inspections: 7 · Violations cited: 23MANDEL METALS, INC., OSHA inspections: 7 · Violations cited: 8GREYSTONE MANUFACTUR…, OSHA inspections: 7 · Violations cited: 19NEW ENGLAND WOODEN W…, OSHA inspections: 7 · Violations cited: 11DYERSVILLE DIE CAST, OSHA inspections: 7 · Violations cited: 9OFAB, INC., OSHA inspections: 7 · Violations cited: 6PILGRIM'S PRIDE CORP…, OSHA inspections: 7 · Violations cited: 4LATEXCO, LLC, OSHA inspections: 7 · Violations cited: 39TYSON FRESH MEATS, I…, OSHA inspections: 7 · Violations cited: 13AL LARSON BOAT SHOP, OSHA inspections: 7 · Violations cited: 16Sterling Metal Works…, OSHA inspections: 7 · Violations cited: 36
Sterling Metal Works DBA Liberty Cast Products LLC has 7 OSHA inspections on record and 36 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Sterling Metal Works DBA Liberty Cast Products LLC in the Manufacturing enforcement ledger

In Manufacturing, Sterling Metal Works DBA Liberty Cast Products LLC sits at penalty rank #15,141 of 35,243 penalized establishments ($10,600 assessed).

How Sterling Metal Works DBA Liberty Cast Products LLC Compares

Sterling Metal Works DBA Liberty Cast Products LLC's 5.14 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

7

First Inspection

2017-09-28

Last Inspection

2025-11-04

Inspection Span

8 yrs

Violations / Inspection

5.1

Avg Penalty / Inspection

$1,514

Industry Avg / Inspection

$6,093

What this shows 7 inspections over 8 years, averaging 5.1 violations per visit. That's $1,514 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

21

Serious

58.3% of total

0

Willful

0.0% of total

6

Repeat

16.7% of total

9

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$21,200

Current Penalty Amount

$10,600

Penalty Reduction

50.0%

What this shows Penalties were reduced by $10,600 from the initial assessment of $21,200. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Sterling Metal Works DBA Liberty Cast Products LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Sterling Metal Works DBA Liberty Cast Products LLC Industry Avg
Inspections 7 2.6
Violations 36 8.0
Total Penalty $10,600 $15,763
Avg Penalty per Inspection $1,514 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Sterling Metal Works DBA Liberty Cast Products LLC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($10,600 here).

Cedar's Mediterranean Foods, INC. $10,600 MA Azar International INC. $10,600 NY Cobalt Truck Equipment $10,600 NV Metal Litho and Laminating, LLC $10,600 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (7 inspections here).

Cooper Tire & Rubber CO. 7 insp. Findlay, OH E-Pak Manufacturing, LLC. 7 insp. Wooster, OH Harrison Poultry, INC. 7 insp. Bethlehem, GA Cinao 7 insp. Springfield, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Cedar's Mediterranean Foods, INC.
Ward Hill, MA
3 inspections $10,600
Azar International INC.
Nanuet, NY
3 inspections $10,600
Cobalt Truck Equipment
Las Vegas, NV
4 inspections $10,600
Metal Litho and Laminating, LLC
Greenville, PA
5 inspections $10,600
Joy Global INC.
Milwaukee, WI
5 inspections $10,600

Compare Sterling Metal Works DBA Liberty Cast Products LLC vs Cedar's Mediterranean Foods, INC. side-by-side →

What to do with this record

Use Sterling Metal Works DBA Liberty Cast Products LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Sterling Metal Works DBA Liberty Cast Products LLC against Cedar's Mediterranean Foods, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Sterling Metal Works DBA Liberty Cast Products LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Sterling Metal Works DBA Liberty Cast Products LLC safe to work at? ▼
Based on OSHA records, Sterling Metal Works DBA Liberty Cast Products LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 36 violations across 7 inspections, including 21 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Sterling Metal Works DBA Liberty Cast Products LLC have? ▼
Sterling Metal Works DBA Liberty Cast Products LLC has 36 OSHA violations on record, including 21 serious, 0 willful, and 6 repeat violations. The total current penalty amount is $10,600.
How many OSHA inspections has Sterling Metal Works DBA Liberty Cast Products LLC had? ▼
Sterling Metal Works DBA Liberty Cast Products LLC has had 7 OSHA inspections, with the first recorded on 2017-09-28 and the most recent on 2025-11-04. This averages 5.1 violations per inspection.
What is the total penalty amount for Sterling Metal Works DBA Liberty Cast Products LLC? ▼
Sterling Metal Works DBA Liberty Cast Products LLC has been assessed $10,600 in current OSHA penalties, reduced from an initial assessment of $21,200 (a 50.0% reduction).
Does Sterling Metal Works DBA Liberty Cast Products LLC have any serious or willful violations? ▼
Yes. Sterling Metal Works DBA Liberty Cast Products LLC has 21 serious violations, and 6 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Sterling Metal Works DBA Liberty Cast Products LLC operate in? ▼
Sterling Metal Works DBA Liberty Cast Products LLC operates in the Manufacturing sector (NAICS code 331523). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Sterling Metal Works DBA Liberty Cast Products LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Sterling Metal Works DBA Liberty Cast Products LLC ranks #33,361 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Sterling Metal Works DBA Liberty Cast Products LLC's safety record compare to industry average? ▼
Sterling Metal Works DBA Liberty Cast Products LLC's total OSHA penalty of $10,600 is below the Manufacturing industry average of $15,763 per employer. The employer has 7 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Cobalt Truck Equipment in Las Vegas, NV is a similar manufacturing employer with $10,600 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 7 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.