Manufacturing · Decorah, IA
Stanley Engineered Fastening
According to OSHA enforcement records (2010–2026), Stanley Engineered Fastening ranks #32,236 of 99,447 penalized U.S. employers by total current penalty, with a average safety record: 5 violations across 4 inspections.
- $11,025
- OSHA penalties
- 5
- Violations cited
- 4
- OSHA inspections
- #32,236
- of 99,447 penalized employers
Stanley Engineered Fastening in Decorah, IA has been the subject of 4 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,025. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.
The record in one line
OSHA has inspected Stanley Engineered Fastening 4 times over 8 years, roughly once every couple of years. These inspections resulted in 5 violations, averaging 1.3 per inspection. According to OSHA enforcement records, its total current penalty ranks #32,236 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Florida Production Engineering in Circleville, OH is another manufacturing employer with 2 OSHA inspections on record and $11,025 in current penalties.
- 1.3
- violations per inspection
- 0.0%
- of violations were serious
- #32,236
- of 99,447 penalized employers
Compliance score
- C OSHA safety compliance: 5 violations across 4 OSHA inspections (1.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.
How Stanley Engineered Fastening compares on OSHA penalties
Total current penalty vs the Manufacturing per-employer average
- Stanley Engineered Fas…
Stanley Engineered Fastening
$11,025 in penalties
- Manufacturing avg
Manufacturing industry average (per employer)
$15,763 in penalties
What this shows Stanley Engineered Fastening runs moderately below peers (0.7x the sector average) in total OSHA penalties.
Where this penalty ranks nationally
Total current OSHA penalty vs every U.S. employer with a nonzero penalty
$11,025 Bottom 32% least affordable more affordable than 32% of 99,447 U.S. employers with a penalty
Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.
Source U.S. Department of Labor, OSHA enforcement extracts · 2026
Does more inspection scrutiny mean more findings?
Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Stanley Engineered Fastening.
Stanley Engineered Fastening in the Manufacturing enforcement ledger
In Manufacturing, Stanley Engineered Fastening sits at penalty rank #14,711 of 35,243 penalized establishments ($11,025 assessed).
How Stanley Engineered Fastening Compares
Stanley Engineered Fastening's 1.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.
Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).
Enforcement detail
OSHA Inspection History
Total Inspections
4
First Inspection
2017-01-30
Last Inspection
2025-07-24
Inspection Span
8 yrs
Violations / Inspection
1.3
Avg Penalty / Inspection
$2,756
Industry Avg / Inspection
$6,093
What this shows 4 inspections over 8 years, averaging 1.3 violations per visit. That's $2,756 per inspection vs. the Manufacturing average of $6,093.
Enforcement detail
Violation Breakdown
0
Serious
0.0% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
5
Other-Than-Serious
100.0% of total
What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.
Enforcement detail
Penalty Analysis
Initial Penalty Assessed
$15,245
Current Penalty Amount
$11,025
Penalty Reduction
27.7%
What this shows Penalties were reduced by $4,220 from the initial assessment of $15,245. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.
Industry Safety Context: Manufacturing
How Stanley Engineered Fastening compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.
| Metric | Stanley Engineered Fastening | Industry Avg |
|---|---|---|
| Inspections | 4 | 2.6 |
| Violations | 5 | 8.0 |
| Total Penalty | $11,025 | $15,763 |
| Avg Penalty per Inspection | $2,756 | $6,093 |
Nationwide Manufacturing peers with similar penalties or inspection counts
Two OSHA-record peer sets for Stanley Engineered Fastening, both outside IA so the neighborhoods are not geographic containment.
Similar current OSHA penalty
Nearest same-sector employers by current assessed penalty ($11,025 here).
Similar OSHA inspection count
Same-sector employers with a comparable inspection history outside this state (4 inspections here).
Nearby & Similar Employers in Manufacturing
Showing 5 of 44644 other employers tracked in this sector.
Compare Stanley Engineered Fastening vs Poly-Wood LLC side-by-side →
What to do with this record
Use Stanley Engineered Fastening's enforcement history as one data point, not the whole picture.
- A single employer's record can look unusual in isolation. Compare Stanley Engineered Fastening against Poly-Wood LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
- See whether Stanley Engineered Fastening's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
- Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers
Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.
Frequently Asked Questions
Is Stanley Engineered Fastening safe to work at? ▼
How many OSHA violations does Stanley Engineered Fastening have? ▼
How many OSHA inspections has Stanley Engineered Fastening had? ▼
What is the total penalty amount for Stanley Engineered Fastening? ▼
What industry does Stanley Engineered Fastening operate in? ▼
Where does Stanley Engineered Fastening rank nationally on OSHA penalties? ▼
How does Stanley Engineered Fastening's safety record compare to industry average? ▼
Data Sources & Methodology ▼
Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).
Source: OSHA Enforcement Data
Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.
Source: Wage and Hour Division (WHD)
Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.
Employer Matching
Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.