PlainWorker
Employers › NY

Manufacturing · Elmira Heights, NY

Stamped Fittings, INC.

According to OSHA enforcement records (2010–2026), Stamped Fittings, INC. ranks #9,052 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 3 inspections.

Top 10% by penalty69% serious
$33,412
OSHA penalties
13
Violations cited
3
OSHA inspections
#9,052
of 99,447 penalized employers

Stamped Fittings, INC. in Elmira Heights, NY has been the subject of 3 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $33,412. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Stamped Fittings, INC. 3 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 13 violations, averaging 4.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #9,052 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Fabco-Air, INC. in Gainesville, FL is another manufacturing employer with 2 OSHA inspections on record and $33,418 in current penalties.

4.3
violations per inspection
69.2%
of violations were serious
#9,052
of 99,447 penalized employers

Compliance score

F 27/100
  • F OSHA safety compliance: 13 violations across 3 OSHA inspections (4.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Stamped Fittings, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Stamped Fittings, INC. runs well above peers (2.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$33,412 Bottom 9% least affordable more affordable than 9% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). This entry sits in this band. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Stamped Fittings, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.68.316.023.731.4OSHA inspectionsViolations citedJASPER DIMENSION LLC, OSHA inspections: 3 · Violations cited: 5T.S. UPSETTING & THR…, OSHA inspections: 3 · Violations cited: 11MSC WALBRIDGE COATIN…, OSHA inspections: 3 · Violations cited: 11CENTRAL FLORIDA CUST…, OSHA inspections: 3 · Violations cited: 27YASUFUKU USA, INC., OSHA inspections: 3 · Violations cited: 4EAST COAST REPAIR AN…, OSHA inspections: 3 · Violations cited: 13FOREST CITY TECHNOLO…, OSHA inspections: 3 · Violations cited: 11MILLER WIRE WORKS, I…, OSHA inspections: 3 · Violations cited: 15DELTCO OF WISCONSIN,…, OSHA inspections: 3 · Violations cited: 18MIBA BEARINGS US, LLC, OSHA inspections: 3 · Violations cited: 15PLASTIC TRIM INTL INC, OSHA inspections: 3 · Violations cited: 30THE BOEING COMPANY, OSHA inspections: 3 · Violations cited: 2CATALINA CYLINDERS, …, OSHA inspections: 3 · Violations cited: 9BRADFORD MARINE, INC., OSHA inspections: 3 · Violations cited: 20CENTRAL GARDEN & PET…, OSHA inspections: 3 · Violations cited: 12CLW, INC., OSHA inspections: 3 · Violations cited: 6WILD CHERRY SPOON CO., OSHA inspections: 3 · Violations cited: 11HOMECREST OUTDOOR LI…, OSHA inspections: 3 · Violations cited: 14WAUPACA FOUNDRY INC, OSHA inspections: 3 · Violations cited: 12MARY'S GONE CRACKERS…, OSHA inspections: 3 · Violations cited: 7Stamped Fittings, INC., OSHA inspections: 3 · Violations cited: 13
Stamped Fittings, INC. has 3 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Stamped Fittings, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Stamped Fittings, INC. is the #4,526 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($33,412).

How Stamped Fittings, INC. Compares

Stamped Fittings, INC.'s 4.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-08-13

Last Inspection

2023-04-26

Inspection Span

9 yrs

Violations / Inspection

4.3

Avg Penalty / Inspection

$11,137

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 9 years, averaging 4.3 violations per visit. That's $11,137 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

9

Serious

69.2% of total

0

Willful

0.0% of total

4

Repeat

30.8% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$55,160

Current Penalty Amount

$33,412

Penalty Reduction

39.4%

What this shows Penalties were reduced by $21,748 from the initial assessment of $55,160. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Stamped Fittings, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Stamped Fittings, INC. Industry Avg
Inspections 3 2.6
Violations 13 8.0
Total Penalty $33,412 $15,763
Avg Penalty per Inspection $11,137 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Stamped Fittings, INC., both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($33,412 here).

Fabco-Air, INC. $33,418 FL H & S Manufacturing CO., INC. $33,400 WI Ibc Engineered Materials INC $33,400 MA Ashworth Bros., INC. $33,388 VA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Jasper Dimension LLC 3 insp. Jasper, IN T.S. Upsetting & Threading Services, L.P. 3 insp. Houston, TX MSC Walbridge Coatings INC. 3 insp. Walbridge, OH Central Florida Custom Trailers, INC. 3 insp. Orlando, FL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Commitment 2000 INC.
Buffalo, NY
7 inspections $33,413
Commercial Radio Systems
Du Bois, PA
0 inspections $0
Fabco-Air, INC.
Gainesville, FL
2 inspections $33,418
H & S Manufacturing CO., INC.
Marshfield, WI
3 inspections $33,400
Ibc Engineered Materials INC
Wilmington, MA
2 inspections $33,400

Compare Stamped Fittings, INC. vs Commitment 2000 INC. side-by-side →

What to do with this record

Use Stamped Fittings, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Stamped Fittings, INC. against Commitment 2000 INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Stamped Fittings, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Stamped Fittings, INC. safe to work at? ▼
Based on OSHA records, Stamped Fittings, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 3 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Stamped Fittings, INC. have? ▼
Stamped Fittings, INC. has 13 OSHA violations on record, including 9 serious, 0 willful, and 4 repeat violations. The total current penalty amount is $33,412.
How many OSHA inspections has Stamped Fittings, INC. had? ▼
Stamped Fittings, INC. has had 3 OSHA inspections, with the first recorded on 2014-08-13 and the most recent on 2023-04-26. This averages 4.3 violations per inspection.
What is the total penalty amount for Stamped Fittings, INC.? ▼
Stamped Fittings, INC. has been assessed $33,412 in current OSHA penalties, reduced from an initial assessment of $55,160 (a 39.4% reduction).
Does Stamped Fittings, INC. have any serious or willful violations? ▼
Yes. Stamped Fittings, INC. has 9 serious violations, and 4 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Stamped Fittings, INC. operate in? ▼
Stamped Fittings, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Stamped Fittings, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Stamped Fittings, INC. ranks #9,052 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Stamped Fittings, INC.'s safety record compare to industry average? ▼
Stamped Fittings, INC.'s total OSHA penalty of $33,412 is above the Manufacturing industry average of $15,763 per employer (2.1x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Fabco-Air, INC. in Gainesville, FL is a similar manufacturing employer with $33,418 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.