PlainWorker
Employers › CO

Manufacturing · Arvada, CO

ST. Thomas Steel, INC.

According to OSHA enforcement records (2010–2026), ST. Thomas Steel, INC. ranks #54,347 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 3 inspections.

Lower half by penalty0% serious
$5,145
OSHA penalties
5
Violations cited
3
OSHA inspections
#54,347
of 99,447 penalized employers

ST. Thomas Steel, INC. in Arvada, CO has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,145. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected ST. Thomas Steel, INC. 3 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 5 violations, averaging 1.7 per inspection. According to OSHA enforcement records, its total current penalty ranks #54,347 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, George's Chicken, LLC in Edinburg, VA is another manufacturing employer with 3 OSHA inspections on record and $5,144 in current penalties.

1.7
violations per inspection
0.0%
of violations were serious
#54,347
of 99,447 penalized employers

Compliance score

C 66/100
  • C OSHA safety compliance: 5 violations across 3 OSHA inspections (1.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How ST. Thomas Steel, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows ST. Thomas Steel, INC. runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,145 Top 45% most affordable more affordable than 55% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is ST. Thomas Steel, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.416.530.544.558.5OSHA inspectionsViolations citedPACKAGING CORPORATIO…, OSHA inspections: 3 · Violations cited: 38PURE POWER TECHNOLOG…, OSHA inspections: 3 · Violations cited: 13JEFFERSON COUNTY TIM…, OSHA inspections: 3 · Violations cited: 56FIC AMERICA CORP., OSHA inspections: 3 · Violations cited: 15TRICON TIMBER, LLC, OSHA inspections: 3 · Violations cited: 32NIBCO, INC., OSHA inspections: 3 · Violations cited: 7NATIONAL MAINTENANCE…, OSHA inspections: 3 · Violations cited: 14STEELCAD INDUSTRIAL …, OSHA inspections: 3 · Violations cited: 19FLEXIBLE FOAM PRODUC…, OSHA inspections: 3 · Violations cited: 7CLEARSPAN COMPONENTS…, OSHA inspections: 3 · Violations cited: 11H & S MANUFACTURING …, OSHA inspections: 3 · Violations cited: 17SUMMIT CORPORATION O…, OSHA inspections: 3 · Violations cited: 38KIK INTERNATIONAL LLC, OSHA inspections: 3 · Violations cited: 9COFFEYVILLE SEKTAM INC, OSHA inspections: 3 · Violations cited: 14VALMET, INC., OSHA inspections: 3 · Violations cited: 6H & D PALLETS, LLC, OSHA inspections: 3 · Violations cited: 21RIVERS METAL PRODUCT…, OSHA inspections: 3 · Violations cited: 9ALLIED CONCRETE PROD…, OSHA inspections: 3 · Violations cited: 12LARIAT STEEL DESIGN,…, OSHA inspections: 3 · Violations cited: 23USA PRODUCTION PARTS…, OSHA inspections: 3 · Violations cited: 15ST. Thomas Steel, INC., OSHA inspections: 3 · Violations cited: 5
ST. Thomas Steel, INC. has 3 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

ST. Thomas Steel, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, ST. Thomas Steel, INC. ranks #22,763 at $5,145 current penalty.

How ST. Thomas Steel, INC. Compares

ST. Thomas Steel, INC.'s 1.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-08-25

Last Inspection

2020-10-08

Inspection Span

10 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$1,715

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 10 years, averaging 1.7 violations per visit. That's $1,715 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,767

Current Penalty Amount

$5,145

Penalty Reduction

10.8%

What this shows Penalties were reduced by $622 from the initial assessment of $5,767. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How ST. Thomas Steel, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric ST. Thomas Steel, INC. Industry Avg
Inspections 3 2.6
Violations 5 8.0
Total Penalty $5,145 $15,763
Avg Penalty per Inspection $1,715 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for ST. Thomas Steel, INC., both outside CO so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,145 here).

MTS Systems Corporation $5,145 MN Prism Color Corporation $5,145 NJ George's Chicken, LLC $5,144 VA Northwest Pipe Company $5,144 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Packaging Corporation of America 3 insp. Tomahawk, WI Pure Power Technologies, LLC 3 insp. Waukesha, WI Jefferson County Timber, LLC 3 insp. Fayette, MS Fic America CORP. 3 insp. Bloomingdale, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

MTS Systems Corporation
Eden Prairie, MN
3 inspections $5,145
Prism Color Corporation
Moorestown, NJ
2 inspections $5,145
George's Chicken, LLC
Edinburg, VA
3 inspections $5,144
Northwest Pipe Company
Saginaw, TX
2 inspections $5,144
Parkdale Mills INC (Plants 32 - 35)
Hillsville, VA
2 inspections $5,144

Compare ST. Thomas Steel, INC. vs MTS Systems Corporation side-by-side →

What to do with this record

Use ST. Thomas Steel, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare ST. Thomas Steel, INC. against MTS Systems Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether ST. Thomas Steel, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is ST. Thomas Steel, INC. safe to work at? ▼
Based on OSHA records, ST. Thomas Steel, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does ST. Thomas Steel, INC. have? ▼
ST. Thomas Steel, INC. has 5 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,145.
How many OSHA inspections has ST. Thomas Steel, INC. had? ▼
ST. Thomas Steel, INC. has had 3 OSHA inspections, with the first recorded on 2010-08-25 and the most recent on 2020-10-08. This averages 1.7 violations per inspection.
What is the total penalty amount for ST. Thomas Steel, INC.? ▼
ST. Thomas Steel, INC. has been assessed $5,145 in current OSHA penalties, reduced from an initial assessment of $5,767 (a 10.8% reduction).
What industry does ST. Thomas Steel, INC. operate in? ▼
ST. Thomas Steel, INC. operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does ST. Thomas Steel, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, ST. Thomas Steel, INC. ranks #54,347 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does ST. Thomas Steel, INC.'s safety record compare to industry average? ▼
ST. Thomas Steel, INC.'s total OSHA penalty of $5,145 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, George's Chicken, LLC in Edinburg, VA is a similar manufacturing employer with $5,144 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.