PlainWorker
Employers › NY

Manufacturing · Marathon, NY

Square Deal Machining, INC.

According to OSHA enforcement records (2010–2026), Square Deal Machining, INC. has a concerning safety record: 31 violations across 4 inspections. See the full breakdown below.

Top 25% by penalty81% serious
$27,402
OSHA penalties
31
Violations cited
4
OSHA inspections
#11,880
of 100,495 penalized employers

Square Deal Machining, INC. in Marathon, NY has been the subject of 4 OSHA workplace inspections and 31 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $27,402. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Square Deal Machining, INC. 4 times over 4 years, roughly annually. These inspections resulted in 31 violations, averaging 7.8 per inspection - a notably high rate. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 25 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.6x the sector average) on inspection frequency. For comparison, TFH/Nylabone Products/Four Paws/Ims in Jamesburg, NJ is another manufacturing employer with 2 OSHA inspections on record and $27,403 in current penalties.

7.8
violations per inspection
80.6%
of violations were serious
88%
of penalized employers rank lower

How Square Deal Machining, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Square Deal Machining, INC. runs moderately above peers (1.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$27,402 Bottom 12% least affordable more affordable than 12% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Square Deal Machining, INC.

The federal enforcement record for Square Deal Machining, INC. in Marathon, NY includes 4 OSHA inspections and 31 violations, translating to 7.75 violations per inspection. Of those violations, 25 (80.6%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $48,420 in initial penalties against this employer, later adjusted to a current total of $27,402 - a 43.4% reduction. Average penalty per inspection works out to $6,851. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately above peers (1.8x the sector average).

Inspection activity spans from 2011-01-26 to 2015-06-25, a window of roughly 4 years.

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2011-01-26

Last Inspection

2015-06-25

Inspection Span

4 yrs

Violations / Inspection

7.8

Avg Penalty / Inspection

$6,851

Industry Avg / Inspection

$6,092

What this shows 4 inspections over 4 years, averaging 7.8 violations per visit. That's $6,851 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

25

Serious

80.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

19.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$48,420

Current Penalty Amount

$27,402

Penalty Reduction

43.4%

What this shows Penalties were reduced by $21,018 from the initial assessment of $48,420. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Square Deal Machining, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Square Deal Machining, INC. Industry Avg
Inspections 4 2.5
Violations 31 7.8
Total Penalty $27,402 $15,410
Avg Penalty per Inspection $6,851 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

TFH/Nylabone Products/Four Paws/Ims
Jamesburg, NJ
2 inspections $27,403
M&M Metals
San Antonio, TX
4 inspections $27,401
Hardinge INC.
Elmira, NY
2 inspections $27,401
The Tranzonic Companies
Knoxville, TN
4 inspections $27,400
A-Ten-C, INC.
Newton Falls, OH
4 inspections $27,400

Compare Square Deal Machining, INC. vs TFH/Nylabone Products/Four Paws/Ims side-by-side →

Frequently Asked Questions

Is Square Deal Machining, INC. safe to work at? ▼
Based on OSHA records, Square Deal Machining, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 31 violations across 4 inspections, including 25 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Square Deal Machining, INC. have? ▼
Square Deal Machining, INC. has 31 OSHA violations on record, including 25 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $27,402.
How many OSHA inspections has Square Deal Machining, INC. had? ▼
Square Deal Machining, INC. has had 4 OSHA inspections, with the first recorded on 2011-01-26 and the most recent on 2015-06-25. This averages 7.8 violations per inspection.
What is the total penalty amount for Square Deal Machining, INC.? ▼
Square Deal Machining, INC. has been assessed $27,402 in current OSHA penalties, reduced from an initial assessment of $48,420 (a 43.4% reduction).
Does Square Deal Machining, INC. have any serious or willful violations? ▼
Yes. Square Deal Machining, INC. has 25 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Square Deal Machining, INC. operate in? ▼
Square Deal Machining, INC. operates in the Manufacturing sector (NAICS code 332999). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Square Deal Machining, INC.'s safety record compare to industry average? ▼
Square Deal Machining, INC.'s total OSHA penalty of $27,402 is above the Manufacturing industry average of $15,410 per employer (1.8x the average). The employer has 4 inspections compared to the industry average of 2.5 per employer. For a direct comparison, TFH/Nylabone Products/Four Paws/Ims in Jamesburg, NJ is a similar manufacturing employer with $27,403 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in NY

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Square Deal Machining, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.