PlainWorker
Employers › SC

Manufacturing · Duncan, SC

Springfield Tool and Die INC

According to OSHA enforcement records (2010–2026), Springfield Tool and Die INC has a concerning safety record: 16 violations across 2 inspections. See the full breakdown below.

Lower half by penalty56% serious
$3,450
OSHA penalties
16
Violations cited
2
OSHA inspections
#65,902
of 100,495 penalized employers

Springfield Tool and Die INC in Duncan, SC has been the subject of 2 OSHA workplace inspections and 16 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,450. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Springfield Tool and Die INC 2 times over 1 year - more than twice a year on average. These inspections resulted in 16 violations, averaging 8.0 per inspection - a notably high rate. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, International Engineering & Manufacturing INC in Hope, MI is another manufacturing employer with 2 OSHA inspections on record and $3,450 in current penalties.

8.0
violations per inspection
56.3%
of violations were serious
34%
of penalized employers rank lower

How Springfield Tool and Die INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Springfield Tool and Die INC runs well below peers (0.22x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,450 Top 34% most affordable more affordable than 66% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Springfield Tool and Die INC

The federal enforcement record for Springfield Tool and Die INC in Duncan, SC includes 2 OSHA inspections and 16 violations, translating to 8.00 violations per inspection. Of those violations, 9 (56.3%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $3,450 in initial penalties against this employer, later adjusted to a current total of $3,450 - no reduction from the original assessment. Average penalty per inspection works out to $1,725. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.22x the sector average).

Inspection activity spans from 2010-07-07 to 2010-08-12, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-07-07

Last Inspection

2010-08-12

Inspection Span

1 yr

Violations / Inspection

8.0

Avg Penalty / Inspection

$1,725

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 8.0 violations per visit. That's $1,725 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

9

Serious

56.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

7

Other-Than-Serious

43.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,450

Current Penalty Amount

$3,450

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Springfield Tool and Die INC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Springfield Tool and Die INC Industry Avg
Inspections 2 2.5
Violations 16 7.8
Total Penalty $3,450 $15,410
Avg Penalty per Inspection $1,725 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

International Engineering & Manufacturing INC
Hope, MI
2 inspections $3,450
G & W Display Fixtures
Bronson, MI
4 inspections $3,450
New Horizons Baking Company
Fremont, IN
3 inspections $3,450
American Eagle Precast, LLC
Detroit, MI
2 inspections $3,450
Bittner Industries, INC.
Prichard, AL
2 inspections $3,450

Compare Springfield Tool and Die INC vs International Engineering & Manufacturing INC side-by-side →

Frequently Asked Questions

Is Springfield Tool and Die INC safe to work at? ▼
Based on OSHA records, Springfield Tool and Die INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 16 violations across 2 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Springfield Tool and Die INC have? ▼
Springfield Tool and Die INC has 16 OSHA violations on record, including 9 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,450.
How many OSHA inspections has Springfield Tool and Die INC had? ▼
Springfield Tool and Die INC has had 2 OSHA inspections, with the first recorded on 2010-07-07 and the most recent on 2010-08-12. This averages 8.0 violations per inspection.
What is the total penalty amount for Springfield Tool and Die INC? ▼
Springfield Tool and Die INC has been assessed $3,450 in current OSHA penalties.
Does Springfield Tool and Die INC have any serious or willful violations? ▼
Yes. Springfield Tool and Die INC has 9 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Springfield Tool and Die INC operate in? ▼
Springfield Tool and Die INC operates in the Manufacturing sector (NAICS code 333514). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Springfield Tool and Die INC's safety record compare to industry average? ▼
Springfield Tool and Die INC's total OSHA penalty of $3,450 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, International Engineering & Manufacturing INC in Hope, MI is a similar manufacturing employer with $3,450 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in SC

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Springfield Tool and Die INC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.