PlainWorker
Employers › IL

Manufacturing · Rockford, IL

Slidematic Precision Components, INC.

According to OSHA enforcement records (2010–2026), Slidematic Precision Components, INC. ranks #25,073 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 3 inspections.

Top 25% by penalty100% serious
$14,435
OSHA penalties
4
Violations cited
3
OSHA inspections
#25,073
of 99,447 penalized employers

Slidematic Precision Components, INC. in Rockford, IL has been the subject of 3 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,435. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Slidematic Precision Components, INC. 3 times over 2 years, roughly annually. These inspections resulted in 4 violations, averaging 1.3 per inspection. According to OSHA enforcement records, its total current penalty ranks #25,073 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Missouri Cooperage Company, INC. in Lebanon, MO is another manufacturing employer with 3 OSHA inspections on record and $14,430 in current penalties.

1.3
violations per inspection
100.0%
of violations were serious
#25,073
of 99,447 penalized employers

Compliance score

C 71/100
  • C OSHA safety compliance: 4 violations across 3 OSHA inspections (1.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Slidematic Precision Components, INC. sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,435 Bottom 25% least affordable more affordable than 25% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Slidematic Precision Components, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.112.52333.443.9OSHA inspectionsViolations citedCARLA'S PASTA, INC., OSHA inspections: 3 · Violations cited: 34OBERDORFER, L.L.C., OSHA inspections: 3 · Violations cited: 42AJLS ENTERPRISES INC., OSHA inspections: 3 · Violations cited: 20NORTHEAST AGRICULTUR…, OSHA inspections: 3 · Violations cited: 25MINI MELTS USA, INC., OSHA inspections: 3 · Violations cited: 31DURA STRESS, INC., OSHA inspections: 3 · Violations cited: 5SCHAEFFLER AEROSPACE…, OSHA inspections: 3 · Violations cited: 15PRIMEX FARMS, LLC, OSHA inspections: 3 · Violations cited: 8ITT GOULDS PUMPS, INC., OSHA inspections: 3 · Violations cited: 6ALPINE WOOD PRODUCTS…, OSHA inspections: 3 · Violations cited: 13PALRAM 2000, INCORPO…, OSHA inspections: 3 · Violations cited: 7MIDWEST RAILCAR REPA…, OSHA inspections: 3 · Violations cited: 12THE CROSBY GROUP LLC, OSHA inspections: 3 · Violations cited: 11ALLAN INDUSTRIAL COA…, OSHA inspections: 3 · Violations cited: 22KERRY INC., OSHA inspections: 3 · Violations cited: 11PHILADELPHIA RUST-PR…, OSHA inspections: 3 · Violations cited: 26GENESIS MILLWORK, LLC, OSHA inspections: 3 · Violations cited: 9TYSON DELI, INC., OSHA inspections: 3 · Violations cited: 8TESSY PLASTICS LLC, OSHA inspections: 3 · Violations cited: 4VITA NONWOVENS, LLC., OSHA inspections: 3 · Violations cited: 6Slidematic Precision…, OSHA inspections: 3 · Violations cited: 4
Slidematic Precision Components, INC. has 3 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Slidematic Precision Components, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Slidematic Precision Components, INC. ranks #11,812 at $14,435 current penalty.

How Slidematic Precision Components, INC. Compares

Slidematic Precision Components, INC.'s 1.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-03-03

Last Inspection

2017-02-14

Inspection Span

2 yrs

Violations / Inspection

1.3

Avg Penalty / Inspection

$4,812

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 1.3 violations per visit. That's $4,812 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$22,867

Current Penalty Amount

$14,435

Penalty Reduction

36.9%

What this shows Penalties were reduced by $8,432 from the initial assessment of $22,867. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Slidematic Precision Components, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Slidematic Precision Components, INC. Industry Avg
Inspections 3 2.6
Violations 4 8.0
Total Penalty $14,435 $15,763
Avg Penalty per Inspection $4,812 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Slidematic Precision Components, INC., both outside IL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,435 here).

Johnson Controls, INC. $14,435 OH Cives Corporation $14,432 VA Missouri Cooperage Company, INC. $14,430 MO Rol-Tech, INC. $14,430 OH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Carla's Pasta, INC. 3 insp. South Windsor, CT Oberdorfer, L.L.C. 3 insp. Syracuse, NY Ajls Enterprises INC. 3 insp. Madison, WI Northeast Agricultural Sales, INC. 3 insp. Detroit, ME

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Johnson Controls, INC.
Holland, OH
5 inspections $14,435
Cives Corporation
Winchester, VA
5 inspections $14,432
Missouri Cooperage Company, INC.
Lebanon, MO
3 inspections $14,430
Rol-Tech, INC.
Fort Loramie, OH
2 inspections $14,430
Grevan Artistic Ventures, INC.
Fort Walton Beach, FL
2 inspections $14,440

Compare Slidematic Precision Components, INC. vs Johnson Controls, INC. side-by-side →

What to do with this record

Use Slidematic Precision Components, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Slidematic Precision Components, INC. against Johnson Controls, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Slidematic Precision Components, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Slidematic Precision Components, INC. safe to work at? ▼
Based on OSHA records, Slidematic Precision Components, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 3 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Slidematic Precision Components, INC. have? ▼
Slidematic Precision Components, INC. has 4 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,435.
How many OSHA inspections has Slidematic Precision Components, INC. had? ▼
Slidematic Precision Components, INC. has had 3 OSHA inspections, with the first recorded on 2015-03-03 and the most recent on 2017-02-14. This averages 1.3 violations per inspection.
What is the total penalty amount for Slidematic Precision Components, INC.? ▼
Slidematic Precision Components, INC. has been assessed $14,435 in current OSHA penalties, reduced from an initial assessment of $22,867 (a 36.9% reduction).
Does Slidematic Precision Components, INC. have any serious or willful violations? ▼
Yes. Slidematic Precision Components, INC. has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Slidematic Precision Components, INC. operate in? ▼
Slidematic Precision Components, INC. operates in the Manufacturing sector (NAICS code 332722). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Slidematic Precision Components, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Slidematic Precision Components, INC. ranks #25,073 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Slidematic Precision Components, INC.'s safety record compare to industry average? ▼
Slidematic Precision Components, INC.'s total OSHA penalty of $14,435 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Missouri Cooperage Company, INC. in Lebanon, MO is a similar manufacturing employer with $14,430 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.