Manufacturing · Flushing, NY
S&L Aerospace Metals, LLC
According to OSHA enforcement records (2010–2026), S&L Aerospace Metals, LLC ranks #11,200 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 14 violations across 4 inspections.
- $28,723
- OSHA penalties
- 14
- Violations cited
- 4
- OSHA inspections
- #11,200
- of 99,447 penalized employers
S&L Aerospace Metals, LLC in Flushing, NY has been the subject of 4 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $28,723. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.
The record in one line
OSHA has inspected S&L Aerospace Metals, LLC 4 times over 6 years, roughly once every couple of years. These inspections resulted in 14 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #11,200 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, K-T Galvanizing Company, INC. in Venus, TX is another manufacturing employer with 3 OSHA inspections on record and $28,710 in current penalties.
- 3.5
- violations per inspection
- 85.7%
- of violations were serious
- #11,200
- of 99,447 penalized employers
Compliance score
- F OSHA safety compliance: 14 violations across 4 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.
How S&L Aerospace Metals, LLC compares on OSHA penalties
Total current penalty vs the Manufacturing per-employer average
- S&L Aerospace Metals, …
S&L Aerospace Metals, LLC
$28,723 in penalties
- Manufacturing avg
Manufacturing industry average (per employer)
$15,763 in penalties
What this shows S&L Aerospace Metals, LLC runs moderately above peers (1.8x the sector average) in total OSHA penalties.
Where this penalty ranks nationally
Total current OSHA penalty vs every U.S. employer with a nonzero penalty
$28,723 Bottom 11% least affordable more affordable than 11% of 99,447 U.S. employers with a penalty
Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.
Source U.S. Department of Labor, OSHA enforcement extracts · 2026
Does more inspection scrutiny mean more findings?
Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is S&L Aerospace Metals, LLC.
S&L Aerospace Metals, LLC in the Manufacturing enforcement ledger
Manufacturing sector: S&L Aerospace Metals, LLC is the #5,547 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($28,723).
How S&L Aerospace Metals, LLC Compares
S&L Aerospace Metals, LLC's 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.
Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.8x the sector average).
Enforcement detail
OSHA Inspection History
Total Inspections
4
First Inspection
2017-08-23
Last Inspection
2023-04-06
Inspection Span
6 yrs
Violations / Inspection
3.5
Avg Penalty / Inspection
$7,181
Industry Avg / Inspection
$6,093
What this shows 4 inspections over 6 years, averaging 3.5 violations per visit. That's $7,181 per inspection vs. the Manufacturing average of $6,093.
Enforcement detail
Violation Breakdown
12
Serious
85.7% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
2
Other-Than-Serious
14.3% of total
What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.
Enforcement detail
Penalty Analysis
Initial Penalty Assessed
$28,723
Current Penalty Amount
$28,723
Penalty Reduction
None
What this shows No reduction on record. The current penalty matches the original OSHA assessment.
Industry Safety Context: Manufacturing
How S&L Aerospace Metals, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.
| Metric | S&L Aerospace Metals, LLC | Industry Avg |
|---|---|---|
| Inspections | 4 | 2.6 |
| Violations | 14 | 8.0 |
| Total Penalty | $28,723 | $15,763 |
| Avg Penalty per Inspection | $7,181 | $6,093 |
Nationwide Manufacturing peers with similar penalties or inspection counts
Two OSHA-record peer sets for S&L Aerospace Metals, LLC, both outside NY so the neighborhoods are not geographic containment.
Similar current OSHA penalty
Nearest same-sector employers by current assessed penalty ($28,723 here).
Similar OSHA inspection count
Same-sector employers with a comparable inspection history outside this state (4 inspections here).
Nearby & Similar Employers in Manufacturing
Showing 5 of 44644 other employers tracked in this sector.
Compare S&L Aerospace Metals, LLC vs Mastercraft Industries, INC. side-by-side →
What to do with this record
Use S&L Aerospace Metals, LLC's enforcement history as one data point, not the whole picture.
- A single employer's record can look unusual in isolation. Compare S&L Aerospace Metals, LLC against Mastercraft Industries, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
- See whether S&L Aerospace Metals, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
- Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers
Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.
Frequently Asked Questions
Is S&L Aerospace Metals, LLC safe to work at? ▼
How many OSHA violations does S&L Aerospace Metals, LLC have? ▼
How many OSHA inspections has S&L Aerospace Metals, LLC had? ▼
What is the total penalty amount for S&L Aerospace Metals, LLC? ▼
Does S&L Aerospace Metals, LLC have any serious or willful violations? ▼
What industry does S&L Aerospace Metals, LLC operate in? ▼
Where does S&L Aerospace Metals, LLC rank nationally on OSHA penalties? ▼
How does S&L Aerospace Metals, LLC's safety record compare to industry average? ▼
Data Sources & Methodology ▼
Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).
Source: OSHA Enforcement Data
Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.
Source: Wage and Hour Division (WHD)
Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.
Employer Matching
Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.