PlainWorker
Employers › MD

Manufacturing · Baltimore, MD

Sessa Sheet Metal Contractors, INC.

According to OSHA enforcement records (2010–2026), Sessa Sheet Metal Contractors, INC. has a concerning safety record: 22 violations across 3 inspections. See the full breakdown below.

Lower half by penalty36% serious
$3,400
OSHA penalties
22
Violations cited
3
OSHA inspections
#66,283
of 100,495 penalized employers

Sessa Sheet Metal Contractors, INC. in Baltimore, MD has been the subject of 3 OSHA workplace inspections and 22 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,400. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Sessa Sheet Metal Contractors, INC. 3 times over 4 years, roughly once every couple of years. These inspections resulted in 22 violations, averaging 7.3 per inspection - a notably high rate. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 8 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Multimetal INC. in Greensburg, PA is another manufacturing employer with 2 OSHA inspections on record and $3,400 in current penalties.

7.3
violations per inspection
36.4%
of violations were serious
34%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Sessa Sheet Metal Contractors, INC. runs well below peers (0.22x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,400 Top 34% most affordable more affordable than 66% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Sessa Sheet Metal Contractors, INC.

The federal enforcement record for Sessa Sheet Metal Contractors, INC. in Baltimore, MD includes 3 OSHA inspections and 22 violations, translating to 7.33 violations per inspection. Of those violations, 8 (36.4%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $5,225 in initial penalties against this employer, later adjusted to a current total of $3,400 - a 34.9% reduction. Average penalty per inspection works out to $1,133. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.22x the sector average).

Inspection activity spans from 2019-04-08 to 2023-02-07, a window of roughly 4 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2019-04-08

Last Inspection

2023-02-07

Inspection Span

4 yrs

Violations / Inspection

7.3

Avg Penalty / Inspection

$1,133

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 4 years, averaging 7.3 violations per visit. That's $1,133 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

8

Serious

36.4% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

14

Other-Than-Serious

63.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,225

Current Penalty Amount

$3,400

Penalty Reduction

34.9%

What this shows Penalties were reduced by $1,825 from the initial assessment of $5,225. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Sessa Sheet Metal Contractors, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Sessa Sheet Metal Contractors, INC. Industry Avg
Inspections 3 2.5
Violations 22 7.8
Total Penalty $3,400 $15,410
Avg Penalty per Inspection $1,133 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

R & R Welding INC
Girard, KS
2 inspections $3,400
Environmental Manufacturing INC.
Manhattan, KS
2 inspections $3,400
Kolimetics, INC
Houston, TX
2 inspections $3,400
Multimetal INC.
Greensburg, PA
2 inspections $3,400
T.S. Shure Products
Chicago, IL
2 inspections $3,400

Compare Sessa Sheet Metal Contractors, INC. vs R & R Welding INC side-by-side →

Frequently Asked Questions

Is Sessa Sheet Metal Contractors, INC. safe to work at? ▼
Based on OSHA records, Sessa Sheet Metal Contractors, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 22 violations across 3 inspections, including 8 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Sessa Sheet Metal Contractors, INC. have? ▼
Sessa Sheet Metal Contractors, INC. has 22 OSHA violations on record, including 8 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,400.
How many OSHA inspections has Sessa Sheet Metal Contractors, INC. had? ▼
Sessa Sheet Metal Contractors, INC. has had 3 OSHA inspections, with the first recorded on 2019-04-08 and the most recent on 2023-02-07. This averages 7.3 violations per inspection.
What is the total penalty amount for Sessa Sheet Metal Contractors, INC.? ▼
Sessa Sheet Metal Contractors, INC. has been assessed $3,400 in current OSHA penalties, reduced from an initial assessment of $5,225 (a 34.9% reduction).
Does Sessa Sheet Metal Contractors, INC. have any serious or willful violations? ▼
Yes. Sessa Sheet Metal Contractors, INC. has 8 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Sessa Sheet Metal Contractors, INC. operate in? ▼
Sessa Sheet Metal Contractors, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Sessa Sheet Metal Contractors, INC.'s safety record compare to industry average? ▼
Sessa Sheet Metal Contractors, INC.'s total OSHA penalty of $3,400 is below the Manufacturing industry average of $15,410 per employer. The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Multimetal INC. in Greensburg, PA is a similar manufacturing employer with $3,400 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MD

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Sessa Sheet Metal Contractors, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.