PlainWorker
Employers › WI

Manufacturing · Milwaukee, WI

Schaefer Tool and Manufacturing CO. INC.

According to OSHA enforcement records (2010–2026), Schaefer Tool and Manufacturing CO. INC. has a concerning safety record: 19 violations across 3 inspections. See the full breakdown below.

Top 25% by penalty79% serious
$29,629
OSHA penalties
19
Violations cited
3
OSHA inspections
#10,726
of 100,495 penalized employers

Schaefer Tool and Manufacturing CO. INC. in Milwaukee, WI has been the subject of 3 OSHA workplace inspections and 19 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $29,629. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Schaefer Tool and Manufacturing CO. INC. 3 times over 6 years, roughly once every couple of years. These inspections resulted in 19 violations, averaging 6.3 per inspection - a notably high rate. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 15 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Rocla Concrete Tie, INC. in Pueblo, CO is another manufacturing employer with 3 OSHA inspections on record and $29,632 in current penalties.

6.3
violations per inspection
78.9%
of violations were serious
89%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Schaefer Tool and Manufacturing CO. INC. runs moderately above peers (1.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$29,629 Bottom 11% least affordable more affordable than 11% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Schaefer Tool and Manufacturing CO. INC.

The federal enforcement record for Schaefer Tool and Manufacturing CO. INC. in Milwaukee, WI includes 3 OSHA inspections and 19 violations, translating to 6.33 violations per inspection. Of those violations, 15 (78.9%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $44,827 in initial penalties against this employer, later adjusted to a current total of $29,629 - a 33.9% reduction. Average penalty per inspection works out to $9,876. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately above peers (1.9x the sector average).

Inspection activity spans from 2010-03-25 to 2016-01-08, a window of roughly 6 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-03-25

Last Inspection

2016-01-08

Inspection Span

6 yrs

Violations / Inspection

6.3

Avg Penalty / Inspection

$9,876

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 6 years, averaging 6.3 violations per visit. That's $9,876 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

15

Serious

78.9% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

21.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$44,827

Current Penalty Amount

$29,629

Penalty Reduction

33.9%

What this shows Penalties were reduced by $15,198 from the initial assessment of $44,827. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Schaefer Tool and Manufacturing CO. INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Schaefer Tool and Manufacturing CO. INC. Industry Avg
Inspections 3 2.5
Violations 19 7.8
Total Penalty $29,629 $15,410
Avg Penalty per Inspection $9,876 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

East Coast Granite
Charleston, SC
0 inspections $0
Rocla Concrete Tie, INC.
Pueblo, CO
3 inspections $29,632
Pratt Paper (GA), LLC
Conyers, GA
2 inspections $29,625
Hilite Industries Automotive, LP
Carrollton, TX
3 inspections $29,634
Cotton Village, Inc.
Los Angeles, CA
0 inspections $0

Compare Schaefer Tool and Manufacturing CO. INC. vs East Coast Granite side-by-side →

Frequently Asked Questions

Is Schaefer Tool and Manufacturing CO. INC. safe to work at? ▼
Based on OSHA records, Schaefer Tool and Manufacturing CO. INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 19 violations across 3 inspections, including 15 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Schaefer Tool and Manufacturing CO. INC. have? ▼
Schaefer Tool and Manufacturing CO. INC. has 19 OSHA violations on record, including 15 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $29,629.
How many OSHA inspections has Schaefer Tool and Manufacturing CO. INC. had? ▼
Schaefer Tool and Manufacturing CO. INC. has had 3 OSHA inspections, with the first recorded on 2010-03-25 and the most recent on 2016-01-08. This averages 6.3 violations per inspection.
What is the total penalty amount for Schaefer Tool and Manufacturing CO. INC.? ▼
Schaefer Tool and Manufacturing CO. INC. has been assessed $29,629 in current OSHA penalties, reduced from an initial assessment of $44,827 (a 33.9% reduction).
Does Schaefer Tool and Manufacturing CO. INC. have any serious or willful violations? ▼
Yes. Schaefer Tool and Manufacturing CO. INC. has 15 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Schaefer Tool and Manufacturing CO. INC. operate in? ▼
Schaefer Tool and Manufacturing CO. INC. operates in the Manufacturing sector (NAICS code 332116). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Schaefer Tool and Manufacturing CO. INC.'s safety record compare to industry average? ▼
Schaefer Tool and Manufacturing CO. INC.'s total OSHA penalty of $29,629 is above the Manufacturing industry average of $15,410 per employer (1.9x the average). The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Rocla Concrete Tie, INC. in Pueblo, CO is a similar manufacturing employer with $29,632 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in WI

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Schaefer Tool and Manufacturing CO. INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.