Manufacturing · Seneca Falls, NY

Scepter INC

According to OSHA enforcement records (2010–2026), Scepter INC ranks #30,317 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 14 violations across 2 inspections.

Upper half by penalty79% serious
$11,880
OSHA penalties
14
Violations cited
2
OSHA inspections
#30,317
of 99,447 penalized employers

Scepter INC in Seneca Falls, NY has been the subject of 2 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,880. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Scepter INC 2 times over 1 year - more than twice a year on average. These inspections resulted in 14 violations, averaging 7.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #30,317 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 11 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, United Machining INC in Sterling Heights, MI is another manufacturing employer with 5 OSHA inspections on record and $11,880 in current penalties.

7.0
violations per inspection
78.6%
of violations were serious
#30,317
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 14 violations across 2 OSHA inspections (7.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Scepter INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Scepter INC runs moderately below peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$11,880 Bottom 30% least affordable more affordable than 30% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Scepter INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.04.513.021.530.038.5OSHA inspectionsViolations citedFIRST MARINE, LLC, A…, OSHA inspections: 2 · Violations cited: 35SOUTH MARINE SYSTEMS…, OSHA inspections: 2 · Violations cited: 20WOODGRAIN MILLWORK, …, OSHA inspections: 2 · Violations cited: 9GREAT DANE - WAYNE P…, OSHA inspections: 2 · Violations cited: 18TWINCRAFT INC., OSHA inspections: 2 · Violations cited: 13ANDOVER HEALTHCARE, …, OSHA inspections: 2 · Violations cited: 14DELEK REFINING, LTD, OSHA inspections: 2 · Violations cited: 8HOLLYFRONTIER ELDORA…, OSHA inspections: 2 · Violations cited: 6CHERRY CRUSHED CONCR…, OSHA inspections: 2 · Violations cited: 10PIONEER TOOL & DIE CO., OSHA inspections: 2 · Violations cited: 13EVERLASTING SURFACES…, OSHA inspections: 2 · Violations cited: 18BAUER, INC., OSHA inspections: 2 · Violations cited: 24CASSANO MARBLE INC., OSHA inspections: 2 · Violations cited: 15OWENS-BROCKWAY GLASS…, OSHA inspections: 2 · Violations cited: 7TRACHTE SOUTHEAST LLC, OSHA inspections: 2 · Violations cited: 28FCA LLC, OSHA inspections: 2 · Violations cited: 8POLYCHEM OMS SYSTEMS…, OSHA inspections: 2 · Violations cited: 37SMURFIT STONE RECYCL…, OSHA inspections: 2 · Violations cited: 22PROTEIN FOR PETS OPC…, OSHA inspections: 2 · Violations cited: 18BECKER WORKS, LTD., OSHA inspections: 2 · Violations cited: 26Scepter INC, OSHA inspections: 2 · Violations cited: 14
Scepter INC has 2 OSHA inspections on record and 14 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Scepter INC in the Manufacturing enforcement ledger

Manufacturing sector: Scepter INC is the #13,949 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($11,880).

How Scepter INC Compares

Scepter INC's 7.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-02-04

Last Inspection

2011-09-21

Inspection Span

1 yr

Violations / Inspection

7.0

Avg Penalty / Inspection

$5,940

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 7.0 violations per visit. That's $5,940 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

11

Serious

78.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

21.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$19,800

Current Penalty Amount

$11,880

Penalty Reduction

40.0%

What this shows Penalties were reduced by $7,920 from the initial assessment of $19,800. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Scepter INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Scepter INC Industry Avg
Inspections 2 2.6
Violations 14 8.0
Total Penalty $11,880 $15,763
Avg Penalty per Inspection $5,940 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Scepter INC, both outside NY so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Scepter INC vs United Machining INC side-by-side →

What to do with this record

Use Scepter INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Scepter INC against United Machining INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Scepter INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Scepter INC safe to work at?
Based on OSHA records, Scepter INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 2 inspections, including 11 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Scepter INC have?
Scepter INC has 14 OSHA violations on record, including 11 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $11,880.
How many OSHA inspections has Scepter INC had?
Scepter INC has had 2 OSHA inspections, with the first recorded on 2011-02-04 and the most recent on 2011-09-21. This averages 7.0 violations per inspection.
What is the total penalty amount for Scepter INC?
Scepter INC has been assessed $11,880 in current OSHA penalties, reduced from an initial assessment of $19,800 (a 40.0% reduction).
Does Scepter INC have any serious or willful violations?
Yes. Scepter INC has 11 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Scepter INC operate in?
Scepter INC operates in the Manufacturing sector (NAICS code 331314). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Scepter INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Scepter INC ranks #30,317 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Scepter INC's safety record compare to industry average?
Scepter INC's total OSHA penalty of $11,880 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, United Machining INC in Sterling Heights, MI is a similar manufacturing employer with $11,880 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.