PlainWorker
Employers › MS

Manufacturing · Jackson, MS

Scanlon-Taylor Millwork Company

According to OSHA enforcement records (2010–2026), Scanlon-Taylor Millwork Company ranks #53,793 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 7 violations across 3 inspections.

Lower half by penalty57% serious
$5,253
OSHA penalties
7
Violations cited
3
OSHA inspections
#53,793
of 99,447 penalized employers

Scanlon-Taylor Millwork Company in Jackson, MS has been the subject of 3 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,253. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Scanlon-Taylor Millwork Company 3 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 7 violations, averaging 2.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #53,793 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Confortaire, INC. in Tupelo, MS is another manufacturing employer with 4 OSHA inspections on record and $5,252 in current penalties.

2.3
violations per inspection
57.1%
of violations were serious
#53,793
of 99,447 penalized employers

Compliance score

D 56/100
  • D OSHA safety compliance: 7 violations across 3 OSHA inspections (2.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Scanlon-Taylor Millwork Company runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,253 Top 46% most affordable more affordable than 54% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Scanlon-Taylor Millwork Company.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.110.52131.441.9OSHA inspectionsViolations citedHEARTHSIDE FOOD SOLU…, OSHA inspections: 3 · Violations cited: 4LA TERRA FINA USA, LLC, OSHA inspections: 3 · Violations cited: 5PRINCE INDUSTRIES INC., OSHA inspections: 3 · Violations cited: 11WM. STEINEN MFG. CO., OSHA inspections: 3 · Violations cited: 12COASTAL PLATING COMP…, OSHA inspections: 3 · Violations cited: 40CARDINAL SCALE MANUF…, OSHA inspections: 3 · Violations cited: 5KFH INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 17PARAGON TEMPERED GLA…, OSHA inspections: 3 · Violations cited: 11CARROLLTON WOOD PROD…, OSHA inspections: 3 · Violations cited: 19CENTER ETHANOL COMPA…, OSHA inspections: 3 · Violations cited: 11SK TECH, INC., OSHA inspections: 3 · Violations cited: 15PHELPS INDUSTRIES, LLC, OSHA inspections: 3 · Violations cited: 8THE SHREDDER COMPANY…, OSHA inspections: 3 · Violations cited: 21HART - CLAYTON INC., OSHA inspections: 3 · Violations cited: 11CBC LATROBE ACQUISIT…, OSHA inspections: 3 · Violations cited: 6SUSCON, INCORPORATED, OSHA inspections: 3 · Violations cited: 12ILLINOIS FABRICATORS…, OSHA inspections: 3 · Violations cited: 17IRRITEC USA, INC., OSHA inspections: 3 · Violations cited: 2G.C. EVANS SALES & M…, OSHA inspections: 3 · Violations cited: 16CHAMPION HOME BUILDE…, OSHA inspections: 3 · Violations cited: 17Scanlon-Taylor Millw…, OSHA inspections: 3 · Violations cited: 7
Scanlon-Taylor Millwork Company has 3 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Scanlon-Taylor Millwork Company in the Manufacturing enforcement ledger

Manufacturing sector: Scanlon-Taylor Millwork Company is the #22,572 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($5,253).

How Scanlon-Taylor Millwork Company Compares

Scanlon-Taylor Millwork Company's 2.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-02-07

Last Inspection

2024-03-27

Inspection Span

10 yrs

Violations / Inspection

2.3

Avg Penalty / Inspection

$1,751

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 10 years, averaging 2.3 violations per visit. That's $1,751 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

57.1% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

42.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$14,135

Current Penalty Amount

$5,253

Penalty Reduction

62.8%

What this shows Penalties were reduced by $8,882 from the initial assessment of $14,135. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Scanlon-Taylor Millwork Company compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Scanlon-Taylor Millwork Company Industry Avg
Inspections 3 2.6
Violations 7 8.0
Total Penalty $5,253 $15,763
Avg Penalty per Inspection $1,751 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Scanlon-Taylor Millwork Company, both outside MS so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,253 here).

Alpine Meats INC. $5,255 CA Stoneware Enterprises INC $5,250 CA Rivard Park Advisors LLC DBA Lyons Manufacturing Group $5,250 MI Selected Furniture LLC $5,250 IN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Hearthside Food Solutions, LLC 3 insp. Romeoville, IL LA Terra Fina USA, LLC 3 insp. Union City, CA Prince Industries INC. 3 insp. Batavia, IL WM. Steinen MFG. CO. 3 insp. Parsippany, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Confortaire, INC.
Tupelo, MS
4 inspections $5,252
Alpine Meats INC.
Stockton, CA
3 inspections $5,255
Selected Furniture LLC
Knox, IN
3 inspections $5,250
Duro Textile Printers
Fall River, MA
2 inspections $5,250
Allen Industries INC
Glen Allen, VA
2 inspections $5,250

Compare Scanlon-Taylor Millwork Company vs Confortaire, INC. side-by-side →

What to do with this record

Use Scanlon-Taylor Millwork Company's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Scanlon-Taylor Millwork Company against Confortaire, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Scanlon-Taylor Millwork Company's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Scanlon-Taylor Millwork Company safe to work at? ▼
Based on OSHA records, Scanlon-Taylor Millwork Company's workplace safety record is mixed, with some compliance concerns. The employer has 7 violations across 3 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Scanlon-Taylor Millwork Company have? ▼
Scanlon-Taylor Millwork Company has 7 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,253.
How many OSHA inspections has Scanlon-Taylor Millwork Company had? ▼
Scanlon-Taylor Millwork Company has had 3 OSHA inspections, with the first recorded on 2014-02-07 and the most recent on 2024-03-27. This averages 2.3 violations per inspection.
What is the total penalty amount for Scanlon-Taylor Millwork Company? ▼
Scanlon-Taylor Millwork Company has been assessed $5,253 in current OSHA penalties, reduced from an initial assessment of $14,135 (a 62.8% reduction).
Does Scanlon-Taylor Millwork Company have any serious or willful violations? ▼
Yes. Scanlon-Taylor Millwork Company has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Scanlon-Taylor Millwork Company operate in? ▼
Scanlon-Taylor Millwork Company operates in the Manufacturing sector (NAICS code 337212). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Scanlon-Taylor Millwork Company rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Scanlon-Taylor Millwork Company ranks #53,793 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Scanlon-Taylor Millwork Company's safety record compare to industry average? ▼
Scanlon-Taylor Millwork Company's total OSHA penalty of $5,253 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Confortaire, INC. in Tupelo, MS is a similar manufacturing employer with $5,252 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.