PlainWorker
Employers › NJ

Manufacturing · Kenilworth, NJ

Saxon Sheet Metal, INC.

According to OSHA enforcement records (2010–2026), Saxon Sheet Metal, INC. ranks #71,331 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Lower half by penalty100% serious
$2,612
OSHA penalties
2
Violations cited
2
OSHA inspections
#71,331
of 99,447 penalized employers

Saxon Sheet Metal, INC. in Kenilworth, NJ has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,612. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Saxon Sheet Metal, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #71,331 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Countryside Feed LLC in Hillsboro, KS is another manufacturing employer with 2 OSHA inspections on record and $2,611 in current penalties.

1.0
violations per inspection
100.0%
of violations were serious
#71,331
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Saxon Sheet Metal, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Saxon Sheet Metal, INC. runs well below peers (0.17x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,612 Top 28% most affordable more affordable than 72% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Saxon Sheet Metal, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.58.81725.333.5OSHA inspectionsViolations citedMISSOURI COOPERAGE C…, OSHA inspections: 2 · Violations cited: 31AGRI-FAB INC., OSHA inspections: 2 · Violations cited: 9HAMMOND SHEET METAL, OSHA inspections: 2 · Violations cited: 32BH COFFEE COMPANY, LLC, OSHA inspections: 2 · Violations cited: 5BEXAR CONCRETE WORKS…, OSHA inspections: 2 · Violations cited: 19BEACON INDUSTRIES, I…, OSHA inspections: 2 · Violations cited: 31BOCCARD PIPE FABRICA…, OSHA inspections: 2 · Violations cited: 11LCY ELASTOMERS LP, OSHA inspections: 2 · Violations cited: 12REAMES AND SON CONST…, OSHA inspections: 2 · Violations cited: 9PLAINVILLE PLATING C…, OSHA inspections: 2 · Violations cited: 21DELTA OILFIELD TANK …, OSHA inspections: 2 · Violations cited: 29DUROX COMPANY, OSHA inspections: 2 · Violations cited: 14NORTHSTAR BATTERY CO., OSHA inspections: 2 · Violations cited: 23MIDWAY INDUSTRIES, I…, OSHA inspections: 2 · Violations cited: 4ND PAPER, LLC, OSHA inspections: 2 · Violations cited: 3ALCOA FASTENING SYST…, OSHA inspections: 2 · Violations cited: 5VPET USA INC, OSHA inspections: 2 · Violations cited: 8CRIDER, INC., OSHA inspections: 2 · Violations cited: 7BERGSTROM CLIMATE SY…, OSHA inspections: 2 · Violations cited: 4ASCEND ELEMENTS, INC., OSHA inspections: 2 · Violations cited: 3Saxon Sheet Metal, I…, OSHA inspections: 2 · Violations cited: 2
Saxon Sheet Metal, INC. has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Saxon Sheet Metal, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Saxon Sheet Metal, INC. is the #28,216 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($2,612).

How Saxon Sheet Metal, INC. Compares

Saxon Sheet Metal, INC.'s 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.17x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2021-12-22

Last Inspection

2021-12-22

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$1,306

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 1.0 violations per visit. That's $1,306 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,730

Current Penalty Amount

$2,612

Penalty Reduction

30.0%

What this shows Penalties were reduced by $1,118 from the initial assessment of $3,730. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Saxon Sheet Metal, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Saxon Sheet Metal, INC. Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $2,612 $15,763
Avg Penalty per Inspection $1,306 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Saxon Sheet Metal, INC., both outside NJ so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,612 here).

Akzo Nobel Coatings INC. $2,612 OH TNT Solid Solutions LLC $2,612 OH Countryside Feed LLC $2,611 KS Sunrise Packaging INC $2,610 MN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Missouri Cooperage Company LLC 2 insp. Lebanon, MO Agri-Fab INC. 2 insp. Sullivan, IL Hammond Sheet Metal 2 insp. El Dorado Springs, MO BH Coffee Company, LLC 2 insp. Elmsford, NY

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Akzo Nobel Coatings INC.
Columbus, OH
2 inspections $2,612
TNT Solid Solutions LLC
Toledo, OH
2 inspections $2,612
Countryside Feed LLC
Hillsboro, KS
2 inspections $2,611
Sunrise Packaging INC
Blaine, MN
3 inspections $2,610
J&B Pallet, INC.
Quakertown, PA
2 inspections $2,610

Compare Saxon Sheet Metal, INC. vs Akzo Nobel Coatings INC. side-by-side →

What to do with this record

Use Saxon Sheet Metal, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Saxon Sheet Metal, INC. against Akzo Nobel Coatings INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Saxon Sheet Metal, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Saxon Sheet Metal, INC. safe to work at? ▼
Based on OSHA records, Saxon Sheet Metal, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Saxon Sheet Metal, INC. have? ▼
Saxon Sheet Metal, INC. has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,612.
How many OSHA inspections has Saxon Sheet Metal, INC. had? ▼
Saxon Sheet Metal, INC. has had 2 OSHA inspections, with the first recorded on 2021-12-22 and the most recent on 2021-12-22. This averages 1.0 violations per inspection.
What is the total penalty amount for Saxon Sheet Metal, INC.? ▼
Saxon Sheet Metal, INC. has been assessed $2,612 in current OSHA penalties, reduced from an initial assessment of $3,730 (a 30.0% reduction).
Does Saxon Sheet Metal, INC. have any serious or willful violations? ▼
Yes. Saxon Sheet Metal, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Saxon Sheet Metal, INC. operate in? ▼
Saxon Sheet Metal, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Saxon Sheet Metal, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Saxon Sheet Metal, INC. ranks #71,331 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Saxon Sheet Metal, INC.'s safety record compare to industry average? ▼
Saxon Sheet Metal, INC.'s total OSHA penalty of $2,612 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Countryside Feed LLC in Hillsboro, KS is a similar manufacturing employer with $2,611 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.