PlainWorker
Employers › OR

Construction · White City, OR

S & S Sheetmetal INC

According to OSHA enforcement records (2010–2026), S & S Sheetmetal INC ranks #92,070 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 15 violations across 3 inspections.

Lower half by penalty27% serious
$550
OSHA penalties
15
Violations cited
3
OSHA inspections
#92,070
of 99,447 penalized employers

S & S Sheetmetal INC in White City, OR has been the subject of 3 OSHA workplace inspections and 15 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $550. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected S & S Sheetmetal INC 3 times over 2 years, roughly annually. These inspections resulted in 15 violations, averaging 5.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #92,070 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Advance Moisture Protection, INC. in Baltimore, MD is another construction employer with 2 OSHA inspections on record and $550 in current penalties.

5.0
violations per inspection
26.7%
of violations were serious
#92,070
of 99,447 penalized employers

Compliance score

F 17/100
  • F OSHA safety compliance: 15 violations across 3 OSHA inspections (5.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How S & S Sheetmetal INC compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows S & S Sheetmetal INC runs well below peers (0.08x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$550 Top 7% most affordable more affordable than 93% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is S & S Sheetmetal INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.008.917.926.835.7OSHA inspectionsViolations citedNORTHEAST FRAMING, INC, OSHA inspections: 3 · Violations cited: 9CHRIS EATON, LLC, OSHA inspections: 3 · Violations cited: 15GRANITE CONSTRUCTION…, OSHA inspections: 3 · Violations cited: 6ALDO REYES, OSHA inspections: 3 · Violations cited: 4CHELTENHAM CONSTRUCT…, OSHA inspections: 3 · Violations cited: 5CUBIC WATER, LLC, OSHA inspections: 3 · Violations cited: 13BRUNS & MC DONALD INC., OSHA inspections: 3 · Violations cited: 5JESUS ROBLES HERNANDEZ, OSHA inspections: 3 · Violations cited: 4STEELCON, LLC, OSHA inspections: 3 · Violations cited: 23JPN MASONRY, LLC, OSHA inspections: 3 · Violations cited: 0COREY BARTON HOMES, …, OSHA inspections: 3 · Violations cited: 6CROSS COUNTRY CONSTR…, OSHA inspections: 3 · Violations cited: 5L & T CONSTRUCTION, …, OSHA inspections: 3 · Violations cited: 7ATSM ENTERPRISE, INC., OSHA inspections: 3 · Violations cited: 6MISSOURI FABRICATORS, OSHA inspections: 3 · Violations cited: 11HAWK CONSTRUCTION, OSHA inspections: 3 · Violations cited: 3NEFTALI YANEZ, OSHA inspections: 3 · Violations cited: 7HORVATH ROOFING, INC., OSHA inspections: 3 · Violations cited: 8TITAN INDUSTRIAL SER…, OSHA inspections: 3 · Violations cited: 34BH & B CONSTRUCTION …, OSHA inspections: 3 · Violations cited: 3S & S Sheetmetal INC, OSHA inspections: 3 · Violations cited: 15
S & S Sheetmetal INC has 3 OSHA inspections on record and 15 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

S & S Sheetmetal INC in the Construction enforcement ledger

In Construction, S & S Sheetmetal INC sits at penalty rank #30,597 of 33,222 penalized establishments ($550 assessed).

How S & S Sheetmetal INC Compares

S & S Sheetmetal INC's 5.00 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs well below peers (0.08x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-08-03

Last Inspection

2013-10-21

Inspection Span

2 yrs

Violations / Inspection

5.0

Avg Penalty / Inspection

$183

Industry Avg / Inspection

$3,361

What this shows 3 inspections over 2 years, averaging 5.0 violations per visit. That's $183 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

4

Serious

26.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

11

Other-Than-Serious

73.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$550

Current Penalty Amount

$550

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Construction

How S & S Sheetmetal INC compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric S & S Sheetmetal INC Industry Avg
Inspections 3 2.0
Violations 15 3.3
Total Penalty $550 $6,767
Avg Penalty per Inspection $183 $3,361
View all 61,260 employers in Construction →

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for S & S Sheetmetal INC, both outside OR so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($550 here).

1216 N Flores LLC (Controlling CORP: Orion Cityscape LLC) $550 CA 112395 - Lagestee-Mulder INC $550 IN Top Line Electric LLC $550 MI Advance Moisture Protection, INC. $550 MD

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Northeast Framing, INC 3 insp. Brighton, MA Chris Eaton, LLC 3 insp. Philadelphia, PA Granite Construction Company 3 insp. Santa Barbara, CA Aldo Reyes 3 insp. Margaret, AL

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

1216 N Flores LLC (Controlling CORP: Orion Cityscape LLC)
West Hollywood, CA
2 inspections $550
112395 - Lagestee-Mulder INC
New Chicago, IN
2 inspections $550
Top Line Electric LLC
Traverse City, MI
3 inspections $550
Advance Moisture Protection, INC.
Baltimore, MD
2 inspections $550
Town of Industry
Industry, ME
2 inspections $550

Compare S & S Sheetmetal INC vs 1216 N Flores LLC (Controlling CORP: Orion Cityscape LLC) side-by-side →

What to do with this record

Use S & S Sheetmetal INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare S & S Sheetmetal INC against 1216 N Flores LLC (Controlling CORP: Orion Cityscape LLC), a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether S & S Sheetmetal INC's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is S & S Sheetmetal INC safe to work at? ▼
Based on OSHA records, S & S Sheetmetal INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 15 violations across 3 inspections, including 4 serious violations. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does S & S Sheetmetal INC have? ▼
S & S Sheetmetal INC has 15 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $550.
How many OSHA inspections has S & S Sheetmetal INC had? ▼
S & S Sheetmetal INC has had 3 OSHA inspections, with the first recorded on 2011-08-03 and the most recent on 2013-10-21. This averages 5.0 violations per inspection.
What is the total penalty amount for S & S Sheetmetal INC? ▼
S & S Sheetmetal INC has been assessed $550 in current OSHA penalties.
Does S & S Sheetmetal INC have any serious or willful violations? ▼
Yes. S & S Sheetmetal INC has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does S & S Sheetmetal INC operate in? ▼
S & S Sheetmetal INC operates in the Construction sector (NAICS code 238220). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
Where does S & S Sheetmetal INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, S & S Sheetmetal INC ranks #92,070 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does S & S Sheetmetal INC's safety record compare to industry average? ▼
S & S Sheetmetal INC's total OSHA penalty of $550 is below the Construction industry average of $6,767 per employer. The employer has 3 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Advance Moisture Protection, INC. in Baltimore, MD is a similar construction employer with $550 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.