PlainWorker
Employers › TX

Manufacturing · Fort Worth, TX

Romeo Engineering Incorporated

According to OSHA enforcement records (2010–2026), Romeo Engineering Incorporated ranks #14,072 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 22 violations across 3 inspections.

Top 25% by penalty73% serious
$24,056
OSHA penalties
22
Violations cited
3
OSHA inspections
#14,072
of 99,447 penalized employers

Romeo Engineering Incorporated in Fort Worth, TX has been the subject of 3 OSHA workplace inspections and 22 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $24,056. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Romeo Engineering Incorporated 3 times over 2 years, roughly annually. These inspections resulted in 22 violations, averaging 7.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #14,072 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 16 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, JL Furnishings LLC in Rancho Dominguez, CA is another manufacturing employer with 2 OSHA inspections on record and $24,060 in current penalties.

7.3
violations per inspection
72.7%
of violations were serious
#14,072
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 22 violations across 3 OSHA inspections (7.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Romeo Engineering Incorporated compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Romeo Engineering Incorporated runs moderately above peers (1.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$24,056 Bottom 14% least affordable more affordable than 14% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Romeo Engineering Incorporated.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.914.726.538.350.1OSHA inspectionsViolations citedUNITED FOODS INTERNA…, OSHA inspections: 3 · Violations cited: 22AMPAC PAPER, LLC, OSHA inspections: 3 · Violations cited: 6SCHWARZ PARTNERS PAC…, OSHA inspections: 3 · Violations cited: 9CORBETT CORBETT & CO…, OSHA inspections: 3 · Violations cited: 48BADGER PRECISION CUT…, OSHA inspections: 3 · Violations cited: 16FOUTCH INDUSTRIES, L…, OSHA inspections: 3 · Violations cited: 23SUMMIT WOOD PRODUCTS…, OSHA inspections: 3 · Violations cited: 40CODINO'S FOODS, INC., OSHA inspections: 3 · Violations cited: 6IMMEC, INC., OSHA inspections: 3 · Violations cited: 20STRUPCO, INC., OSHA inspections: 3 · Violations cited: 17XING CONSTRUCTION, I…, OSHA inspections: 3 · Violations cited: 6LODI IRON WORKS, INC., OSHA inspections: 3 · Violations cited: 12FOUNDERS SERVICE & M…, OSHA inspections: 3 · Violations cited: 19SKOLNIK INDUSTRIES, …, OSHA inspections: 3 · Violations cited: 5ROYAL WHITE CEMENT, …, OSHA inspections: 3 · Violations cited: 7ELRO MANUFACTURING LLC, OSHA inspections: 3 · Violations cited: 6UNITED COMPOST AND O…, OSHA inspections: 3 · Violations cited: 10COMMANDER BUILDINGS, OSHA inspections: 3 · Violations cited: 13AMERICAN ORDNANCE LLC, OSHA inspections: 3 · Violations cited: 5INNOVA SUPPLY, INC., OSHA inspections: 3 · Violations cited: 8Romeo Engineering In…, OSHA inspections: 3 · Violations cited: 22
Romeo Engineering Incorporated has 3 OSHA inspections on record and 22 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Romeo Engineering Incorporated in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Romeo Engineering Incorporated ranks #6,877 at $24,056 current penalty.

How Romeo Engineering Incorporated Compares

Romeo Engineering Incorporated's 7.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-09-23

Last Inspection

2013-05-30

Inspection Span

2 yrs

Violations / Inspection

7.3

Avg Penalty / Inspection

$8,019

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 7.3 violations per visit. That's $8,019 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

16

Serious

72.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

27.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$47,600

Current Penalty Amount

$24,056

Penalty Reduction

49.5%

What this shows Penalties were reduced by $23,544 from the initial assessment of $47,600. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Romeo Engineering Incorporated compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Romeo Engineering Incorporated Industry Avg
Inspections 3 2.6
Violations 22 8.0
Total Penalty $24,056 $15,763
Avg Penalty per Inspection $8,019 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Romeo Engineering Incorporated, both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($24,056 here).

HY-Production, INC. $24,060 OH JL Furnishings LLC $24,060 CA Coca-Cola Bottling Company United, INC. $24,051 AL Profac INC. $24,062 OH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

United Foods International (USA), INC. 3 insp. Hayward, CA Ampac Paper, LLC 3 insp. Walden, NY Schwarz Partners Packaging, LLC 3 insp. Marion, OH Corbett Corbett & Corbett PTR DBA Corbett Package 3 insp. Wilmington, NC

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Petrochem Field Services
Humble, TX
0 inspections $0
HY-Production, INC.
Valley City, OH
2 inspections $24,060
JL Furnishings LLC
Rancho Dominguez, CA
2 inspections $24,060
Iberia Foods Corp - Miami/Orlando Distrib.
Miami, FL
0 inspections $0
Coca-Cola Bottling Company United, INC.
Birmingham, AL
3 inspections $24,051

Compare Romeo Engineering Incorporated vs Petrochem Field Services side-by-side →

What to do with this record

Use Romeo Engineering Incorporated's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Romeo Engineering Incorporated against Petrochem Field Services, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Romeo Engineering Incorporated's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Romeo Engineering Incorporated safe to work at? ▼
Based on OSHA records, Romeo Engineering Incorporated's workplace safety record is concerning, with multiple serious compliance issues. The employer has 22 violations across 3 inspections, including 16 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Romeo Engineering Incorporated have? ▼
Romeo Engineering Incorporated has 22 OSHA violations on record, including 16 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $24,056.
How many OSHA inspections has Romeo Engineering Incorporated had? ▼
Romeo Engineering Incorporated has had 3 OSHA inspections, with the first recorded on 2011-09-23 and the most recent on 2013-05-30. This averages 7.3 violations per inspection.
What is the total penalty amount for Romeo Engineering Incorporated? ▼
Romeo Engineering Incorporated has been assessed $24,056 in current OSHA penalties, reduced from an initial assessment of $47,600 (a 49.5% reduction).
Does Romeo Engineering Incorporated have any serious or willful violations? ▼
Yes. Romeo Engineering Incorporated has 16 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Romeo Engineering Incorporated operate in? ▼
Romeo Engineering Incorporated operates in the Manufacturing sector (NAICS code 333999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Romeo Engineering Incorporated rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Romeo Engineering Incorporated ranks #14,072 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Romeo Engineering Incorporated's safety record compare to industry average? ▼
Romeo Engineering Incorporated's total OSHA penalty of $24,056 is above the Manufacturing industry average of $15,763 per employer (1.5x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, JL Furnishings LLC in Rancho Dominguez, CA is a similar manufacturing employer with $24,060 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.