PlainWorker
Employers › MI

Manufacturing · Fraser, MI

Rolled Shapes & Engineering INC

According to OSHA enforcement records (2010–2026), Rolled Shapes & Engineering INC ranks #19,629 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 41 violations across 3 inspections.

Top 25% by penalty61% serious
$18,100
OSHA penalties
41
Violations cited
3
OSHA inspections
#19,629
of 99,447 penalized employers

Rolled Shapes & Engineering INC in Fraser, MI has been the subject of 3 OSHA workplace inspections and 41 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $18,100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Rolled Shapes & Engineering INC 3 times over 1 year - more than twice a year on average. These inspections turned up 41 violations, averaging 13.7 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #19,629 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 25 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Volunteer Pallet of Tennessee LLC in Jackson, TN is another manufacturing employer with 2 OSHA inspections on record and $18,100 in current penalties.

13.7
violations per inspection
61.0%
of violations were serious
#19,629
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 41 violations across 3 OSHA inspections (13.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Rolled Shapes & Engineering INC sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$18,100 Bottom 20% least affordable more affordable than 20% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Rolled Shapes & Engineering INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0013.426.740.153.5OSHA inspectionsViolations citedGT STONE GRANITE LLC, OSHA inspections: 3 · Violations cited: 27PORCELEN LIMITED CON…, OSHA inspections: 3 · Violations cited: 14BRENTWOOD ORIGINALS,…, OSHA inspections: 3 · Violations cited: 11SPARTECH PLASTICS, LLC, OSHA inspections: 3 · Violations cited: 23DARLING INGREDIENTS …, OSHA inspections: 3 · Violations cited: 14BLUE BELL MATTRESS C…, OSHA inspections: 3 · Violations cited: 24SPECIFIED PLATING CO., OSHA inspections: 3 · Violations cited: 21CLEVELAND DIE & MANU…, OSHA inspections: 3 · Violations cited: 6BADGER METAL FINISHI…, OSHA inspections: 3 · Violations cited: 25HAYASHI TELEMPU NORT…, OSHA inspections: 3 · Violations cited: 6HINKLE CHAIR COMPANY…, OSHA inspections: 3 · Violations cited: 51ARROWHEAD PRODUCTS C…, OSHA inspections: 3 · Violations cited: 7OSMUNDSON MANUFACTUR…, OSHA inspections: 3 · Violations cited: 26MILLER MANUFACTURING, OSHA inspections: 3 · Violations cited: 9PETERSON AMERICAN CO…, OSHA inspections: 3 · Violations cited: 7LIBERTY DUCT, LLC, OSHA inspections: 3 · Violations cited: 17WINSTON PLYWOOD & VE…, OSHA inspections: 3 · Violations cited: 4DUDEK & BOCK SPRING …, OSHA inspections: 3 · Violations cited: 2UNITED LENS COMPANY,…, OSHA inspections: 3 · Violations cited: 13MIDWEST SIGN COMPANY, OSHA inspections: 3 · Violations cited: 7Rolled Shapes & Engi…, OSHA inspections: 3 · Violations cited: 41
Rolled Shapes & Engineering INC has 3 OSHA inspections on record and 41 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Rolled Shapes & Engineering INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Rolled Shapes & Engineering INC ranks #9,400 at $18,100 current penalty.

How Rolled Shapes & Engineering INC Compares

Rolled Shapes & Engineering INC's 13.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2016-02-04

Last Inspection

2016-09-14

Inspection Span

1 yr

Violations / Inspection

13.7

Avg Penalty / Inspection

$6,033

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 13.7 violations per visit. That's $6,033 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

25

Serious

61.0% of total

0

Willful

0.0% of total

2

Repeat

4.9% of total

14

Other-Than-Serious

34.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$18,100

Current Penalty Amount

$18,100

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Rolled Shapes & Engineering INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Rolled Shapes & Engineering INC Industry Avg
Inspections 3 2.6
Violations 41 8.0
Total Penalty $18,100 $15,763
Avg Penalty per Inspection $6,033 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Rolled Shapes & Engineering INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($18,100 here).

Tyson Fresh Meats, INC. $18,100 IN King Tool Company $18,100 TX Volunteer Pallet of Tennessee LLC $18,100 TN Nucor $18,100 NE

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

GT Stone Granite LLC 3 insp. Cartersville, GA Porcelen Limited Connecticut, LLC 3 insp. Hamden, CT Brentwood Originals, INC. 3 insp. Walls, MS Spartech Plastics, LLC 3 insp. Evanston, IL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Tyson Fresh Meats, INC.
Logansport, IN
7 inspections $18,100
Toyo Seat USA Corporation
Imlay City, MI
4 inspections $18,100
King Tool Company
Longview, TX
2 inspections $18,100
Yapp USA Automotive Systems INC
Romulus, MI
3 inspections $18,100
Volunteer Pallet of Tennessee LLC
Jackson, TN
2 inspections $18,100

Compare Rolled Shapes & Engineering INC vs Tyson Fresh Meats, INC. side-by-side →

What to do with this record

Use Rolled Shapes & Engineering INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Rolled Shapes & Engineering INC against Tyson Fresh Meats, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Rolled Shapes & Engineering INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Rolled Shapes & Engineering INC safe to work at? ▼
Based on OSHA records, Rolled Shapes & Engineering INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 41 violations across 3 inspections, including 25 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Rolled Shapes & Engineering INC have? ▼
Rolled Shapes & Engineering INC has 41 OSHA violations on record, including 25 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $18,100.
How many OSHA inspections has Rolled Shapes & Engineering INC had? ▼
Rolled Shapes & Engineering INC has had 3 OSHA inspections, with the first recorded on 2016-02-04 and the most recent on 2016-09-14. This averages 13.7 violations per inspection.
What is the total penalty amount for Rolled Shapes & Engineering INC? ▼
Rolled Shapes & Engineering INC has been assessed $18,100 in current OSHA penalties.
Does Rolled Shapes & Engineering INC have any serious or willful violations? ▼
Yes. Rolled Shapes & Engineering INC has 25 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Rolled Shapes & Engineering INC operate in? ▼
Rolled Shapes & Engineering INC operates in the Manufacturing sector (NAICS code 333514). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Rolled Shapes & Engineering INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Rolled Shapes & Engineering INC ranks #19,629 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Rolled Shapes & Engineering INC's safety record compare to industry average? ▼
Rolled Shapes & Engineering INC's total OSHA penalty of $18,100 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Volunteer Pallet of Tennessee LLC in Jackson, TN is a similar manufacturing employer with $18,100 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.