PlainWorker
Employers › MI

Wholesale Trade · Temperance, MI

Rolled Alloys INC

According to OSHA enforcement records (2010–2026), Rolled Alloys INC has a mixed safety record: 6 violations across 2 inspections. See the full breakdown below.

Lower half by penalty83% serious
$4,375
OSHA penalties
6
Violations cited
2
OSHA inspections
#59,774
of 100,495 penalized employers

Rolled Alloys INC in Temperance, MI has been the subject of 2 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $4,375. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Rolled Alloys INC 2 times across a longer 5-year span, an infrequent cadence. These inspections resulted in 6 violations, averaging 3.0 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Wholesale Trade industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Reserve Alloys, LLC in Jacksonville, FL is another wholesale trade employer with 2 OSHA inspections on record and $4,375 in current penalties.

3.0
violations per inspection
83.3%
of violations were serious
41%
of penalized employers rank lower

How Rolled Alloys INC compares on OSHA penalties

Total current penalty vs the Wholesale Trade per-employer average

in penalties

What this shows Rolled Alloys INC runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$4,375 Top 41% most affordable more affordable than 59% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Rolled Alloys INC

The federal enforcement record for Rolled Alloys INC in Temperance, MI includes 2 OSHA inspections and 6 violations, translating to 3.00 violations per inspection. Of those violations, 5 (83.3%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $8,750 in initial penalties against this employer, later adjusted to a current total of $4,375 - a 50.0% reduction. Average penalty per inspection works out to $2,188. Against the Wholesale Trade industry average of $9,023 per employer, this record runs moderately below peers (0.5x the sector average).

Inspection activity spans from 2011-05-26 to 2016-05-23, a window of roughly 5 years.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-05-26

Last Inspection

2016-05-23

Inspection Span

5 yrs

Violations / Inspection

3.0

Avg Penalty / Inspection

$2,188

Industry Avg / Inspection

$4,678

What this shows 2 inspections over 5 years, averaging 3.0 violations per visit. That's $2,188 per inspection vs. the Wholesale Trade average of $4,678.

Enforcement detail

Violation Breakdown

5

Serious

83.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

16.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,750

Current Penalty Amount

$4,375

Penalty Reduction

50.0%

What this shows Penalties were reduced by $4,375 from the initial assessment of $8,750. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Wholesale Trade

How Rolled Alloys INC compares to the Wholesale Trade sector, which has 6,960 employers tracked by PlainWorker.

Metric Rolled Alloys INC Industry Avg
Inspections 2 1.9
Violations 6 5.4
Total Penalty $4,375 $9,023
Avg Penalty per Inspection $2,188 $4,678
View all 6,960 employers in Wholesale Trade →

Nearby & Similar Employers in Wholesale Trade

Reserve Alloys, LLC
Jacksonville, FL
2 inspections $4,375
Acme Scrap, INC.
Great Bend, KS
2 inspections $4,375
Mid-Columbia Producers
The Dalles, OR
3 inspections $4,380
Lovey Dovey Plus, Inc.
Los Angeles, CA
0 inspections $0
The Horton Fruit Co.
Louisville, KY
0 inspections $0

Compare Rolled Alloys INC vs Reserve Alloys, LLC side-by-side →

Frequently Asked Questions

Is Rolled Alloys INC safe to work at? ▼
Based on OSHA records, Rolled Alloys INC's workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 2 inspections, including 5 serious violations. Compared to Wholesale Trade industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Rolled Alloys INC have? ▼
Rolled Alloys INC has 6 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $4,375.
How many OSHA inspections has Rolled Alloys INC had? ▼
Rolled Alloys INC has had 2 OSHA inspections, with the first recorded on 2011-05-26 and the most recent on 2016-05-23. This averages 3.0 violations per inspection.
What is the total penalty amount for Rolled Alloys INC? ▼
Rolled Alloys INC has been assessed $4,375 in current OSHA penalties, reduced from an initial assessment of $8,750 (a 50.0% reduction).
Does Rolled Alloys INC have any serious or willful violations? ▼
Yes. Rolled Alloys INC has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Rolled Alloys INC operate in? ▼
Rolled Alloys INC operates in the Wholesale Trade sector (NAICS code 423510). This industry has 6,960 employers tracked by PlainWorker, with 13,424 total OSHA inspections and $62.80M in cumulative penalties.
How does Rolled Alloys INC's safety record compare to industry average? ▼
Rolled Alloys INC's total OSHA penalty of $4,375 is below the Wholesale Trade industry average of $9,023 per employer. The employer has 2 inspections compared to the industry average of 1.9 per employer. For a direct comparison, Reserve Alloys, LLC in Jacksonville, FL is a similar wholesale trade employer with $4,375 in current penalties.

Explore PlainWorker

Wholesale Trade Industry

All 6,960 employers in this sector
Employers in MI

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Rolled Alloys INC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.