PlainWorker
Employers › OH

Manufacturing · Mansfield, OH

Richland Screw Machine Parts, INC.

According to OSHA enforcement records (2010–2026), Richland Screw Machine Parts, INC. ranks #49,158 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 3 violations across 2 inspections.

Upper half by penalty100% serious
$6,208
OSHA penalties
3
Violations cited
2
OSHA inspections
#49,158
of 99,447 penalized employers

Richland Screw Machine Parts, INC. in Mansfield, OH has been the subject of 2 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,208. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Richland Screw Machine Parts, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 3 violations, averaging 1.5 per inspection. According to OSHA enforcement records, its total current penalty ranks #49,158 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Motts, LLP in Carlstadt, NJ is another manufacturing employer with 3 OSHA inspections on record and $6,207 in current penalties.

1.5
violations per inspection
100.0%
of violations were serious
#49,158
of 99,447 penalized employers

Compliance score

C 68/100
  • C OSHA safety compliance: 3 violations across 2 OSHA inspections (1.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Richland Screw Machine Parts, INC. runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,208 Bottom 49% least affordable more affordable than 49% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Richland Screw Machine Parts, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.59.517.525.533.5OSHA inspectionsViolations citedARTHUR SCHUMAN MIDWE…, OSHA inspections: 2 · Violations cited: 10TEXAMERICAN FOOD BLE…, OSHA inspections: 2 · Violations cited: 8WOLVERINE ADVANCED M…, OSHA inspections: 2 · Violations cited: 4ORGANICS CORPORATION…, OSHA inspections: 2 · Violations cited: 20DUFECK MANUFACTURING…, OSHA inspections: 2 · Violations cited: 27VENTURE CHEMICALS INC., OSHA inspections: 2 · Violations cited: 32CALIFORNIA ASPHALT P…, OSHA inspections: 2 · Violations cited: 23RISA MANAGEMENT CORP., OSHA inspections: 2 · Violations cited: 17ORICA, OSHA inspections: 2 · Violations cited: 15INTERNATIONAL PITA B…, OSHA inspections: 2 · Violations cited: 9LOTUS BEVERAGE ALLIA…, OSHA inspections: 2 · Violations cited: 10LAND O' LAKES, INC., OSHA inspections: 2 · Violations cited: 10SOURCE ONE PACKAGING…, OSHA inspections: 2 · Violations cited: 7ARCTIC GLACIER U.S.A…, OSHA inspections: 2 · Violations cited: 27SWIFT PORK COMPANY A…, OSHA inspections: 2 · Violations cited: 6USA QUARTZ, LLC, OSHA inspections: 2 · Violations cited: 15OMI CRANE SYSTEMS INC, OSHA inspections: 2 · Violations cited: 6DAVIS TOOL & DIE, OSHA inspections: 2 · Violations cited: 25CALIFORNIA EXPANDED …, OSHA inspections: 2 · Violations cited: 7PRINSCO, INC., OSHA inspections: 2 · Violations cited: 4Richland Screw Machi…, OSHA inspections: 2 · Violations cited: 3
Richland Screw Machine Parts, INC. has 2 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Richland Screw Machine Parts, INC. in the Manufacturing enforcement ledger

In Manufacturing, Richland Screw Machine Parts, INC. sits at penalty rank #21,046 of 35,243 penalized establishments ($6,208 assessed).

How Richland Screw Machine Parts, INC. Compares

Richland Screw Machine Parts, INC.'s 1.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-10-24

Last Inspection

2017-10-24

Inspection Span

1 yr

Violations / Inspection

1.5

Avg Penalty / Inspection

$3,104

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 1.5 violations per visit. That's $3,104 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,869

Current Penalty Amount

$6,208

Penalty Reduction

30.0%

What this shows Penalties were reduced by $2,661 from the initial assessment of $8,869. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Richland Screw Machine Parts, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Richland Screw Machine Parts, INC. Industry Avg
Inspections 2 2.6
Violations 3 8.0
Total Penalty $6,208 $15,763
Avg Penalty per Inspection $3,104 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Richland Screw Machine Parts, INC., both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,208 here).

Par-Kan Company $6,208 IN Hardwood Lumber $6,208 MO Motts, LLP $6,207 NJ Ferguson Perforating Company $6,210 RI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Arthur Schuman Midwest, LLC 2 insp. Elgin, IL Texamerican Food Blending, INC. 2 insp. Hot Springs, AR Wolverine Advanced Materials, LLC 2 insp. Blacksburg, VA Organics Corporation of America 2 insp. Totowa, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Par-Kan Company
Silver Lake, IN
5 inspections $6,208
Hardwood Lumber
Exeter, MO
2 inspections $6,208
Motts, LLP
Carlstadt, NJ
3 inspections $6,207
Royal Custom Cabinets, Inc.
Norcross, GA
0 inspections $0
Mac Trailer Manufacturing, INC.
Alliance, OH
2 inspections $6,206

Compare Richland Screw Machine Parts, INC. vs Par-Kan Company side-by-side →

What to do with this record

Use Richland Screw Machine Parts, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Richland Screw Machine Parts, INC. against Par-Kan Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Richland Screw Machine Parts, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Richland Screw Machine Parts, INC. safe to work at? ▼
Based on OSHA records, Richland Screw Machine Parts, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 3 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Richland Screw Machine Parts, INC. have? ▼
Richland Screw Machine Parts, INC. has 3 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,208.
How many OSHA inspections has Richland Screw Machine Parts, INC. had? ▼
Richland Screw Machine Parts, INC. has had 2 OSHA inspections, with the first recorded on 2017-10-24 and the most recent on 2017-10-24. This averages 1.5 violations per inspection.
What is the total penalty amount for Richland Screw Machine Parts, INC.? ▼
Richland Screw Machine Parts, INC. has been assessed $6,208 in current OSHA penalties, reduced from an initial assessment of $8,869 (a 30.0% reduction).
Does Richland Screw Machine Parts, INC. have any serious or willful violations? ▼
Yes. Richland Screw Machine Parts, INC. has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Richland Screw Machine Parts, INC. operate in? ▼
Richland Screw Machine Parts, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Richland Screw Machine Parts, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Richland Screw Machine Parts, INC. ranks #49,158 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Richland Screw Machine Parts, INC.'s safety record compare to industry average? ▼
Richland Screw Machine Parts, INC.'s total OSHA penalty of $6,208 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Motts, LLP in Carlstadt, NJ is a similar manufacturing employer with $6,207 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.