PlainWorker
Employers › MA

Manufacturing · Hudson, MA

Restech Plastic Molding, LLC

According to OSHA enforcement records (2010–2026), Restech Plastic Molding, LLC ranks #15,871 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 20 violations across 5 inspections.

Top 25% by penalty85% serious
$21,777
OSHA penalties
20
Violations cited
5
OSHA inspections
#15,871
of 99,447 penalized employers

Restech Plastic Molding, LLC in Hudson, MA has been the subject of 5 OSHA workplace inspections and 20 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $21,777. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Restech Plastic Molding, LLC 5 times over 9 years, roughly once every couple of years. These inspections resulted in 20 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #15,871 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.9x the sector average) on inspection frequency. For comparison, Mueller CO. LLC in Albertville, AL is another manufacturing employer with 5 OSHA inspections on record and $21,782 in current penalties.

4.0
violations per inspection
85.0%
of violations were serious
#15,871
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 20 violations across 5 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Restech Plastic Molding, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Restech Plastic Molding, LLC runs moderately above peers (1.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$21,777 Bottom 16% least affordable more affordable than 16% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Restech Plastic Molding, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both5.05.055.05.00.315.230.044.959.7OSHA inspectionsViolations citedParagon Industries Inc, OSHA inspections: 5 · Violations cited: 3TANGENT TECHNOLOGIES…, OSHA inspections: 5 · Violations cited: 8KAISER ALUMINUM & FA…, OSHA inspections: 5 · Violations cited: 13ACCURATE BOX COMPANY…, OSHA inspections: 5 · Violations cited: 22WEG TRANSFORMERS USA…, OSHA inspections: 5 · Violations cited: 8UTICA METAL PRODUCTS…, OSHA inspections: 5 · Violations cited: 10CENTRIFUGAL ACQUISIT…, OSHA inspections: 5 · Violations cited: 17FEDERAL-MOGUL PISTON…, OSHA inspections: 5 · Violations cited: 6MACSA MOLINOS ANAHUA…, OSHA inspections: 5 · Violations cited: 15TECHNIC, INC., OSHA inspections: 5 · Violations cited: 8TK HOLDINGS, INC., OSHA inspections: 5 · Violations cited: 5DAIRY MAID DAIRY, LLC, OSHA inspections: 5 · Violations cited: 57BASSETT INDUSTRIES, …, OSHA inspections: 5 · Violations cited: 9CALIFORNIA NATURAL P…, OSHA inspections: 5 · Violations cited: 5LEEDY MFG CO., OSHA inspections: 5 · Violations cited: 26MERSEN USA ST. MARYS…, OSHA inspections: 5 · Violations cited: 4NRP JONES, LLC, OSHA inspections: 5 · Violations cited: 19INNOVATIVE TOOL INC, OSHA inspections: 5 · Violations cited: 52MICHIGAN STEEL INC, OSHA inspections: 5 · Violations cited: 10ASSOCIATED HYGIENIC …, OSHA inspections: 5 · Violations cited: 13Restech Plastic Mold…, OSHA inspections: 5 · Violations cited: 20
Restech Plastic Molding, LLC has 5 OSHA inspections on record and 20 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Restech Plastic Molding, LLC in the Manufacturing enforcement ledger

In Manufacturing, Restech Plastic Molding, LLC sits at penalty rank #7,733 of 35,243 penalized establishments ($21,777 assessed).

How Restech Plastic Molding, LLC Compares

Restech Plastic Molding, LLC's 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

5

First Inspection

2013-05-17

Last Inspection

2022-10-31

Inspection Span

9 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$4,355

Industry Avg / Inspection

$6,093

What this shows 5 inspections over 9 years, averaging 4.0 violations per visit. That's $4,355 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

17

Serious

85.0% of total

0

Willful

0.0% of total

1

Repeat

5.0% of total

2

Other-Than-Serious

10.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$70,476

Current Penalty Amount

$21,777

Penalty Reduction

69.1%

What this shows Penalties were reduced by $48,699 from the initial assessment of $70,476. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Restech Plastic Molding, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Restech Plastic Molding, LLC Industry Avg
Inspections 5 2.6
Violations 20 8.0
Total Penalty $21,777 $15,763
Avg Penalty per Inspection $4,355 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Restech Plastic Molding, LLC, both outside MA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($21,777 here).

Fervalue USA, LLC $21,777 IL A & R Iron Works, INC. $21,779 PA Thiele Tanning Company $21,775 WI Mueller CO. LLC $21,782 AL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (5 inspections here).

Paragon Industries Inc 5 insp. Sapulpa, OK Tangent Technologies LLC 5 insp. Montgomery, IL Kaiser Aluminum & Fabricated Products, LLC 5 insp. Sherman, TX Accurate Box Company, INC. 5 insp. Paterson, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Fervalue USA, LLC
Bloomington, IL
2 inspections $21,777
A & R Iron Works, INC.
Philadelphia, PA
5 inspections $21,779
Thiele Tanning Company
Milwaukee, WI
6 inspections $21,775
Mueller CO. LLC
Albertville, AL
5 inspections $21,782
The Goodyear Tire and Rubber Company
Gadsden, AL
2 inspections $21,785

Compare Restech Plastic Molding, LLC vs Fervalue USA, LLC side-by-side →

What to do with this record

Use Restech Plastic Molding, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Restech Plastic Molding, LLC against Fervalue USA, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Restech Plastic Molding, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Restech Plastic Molding, LLC safe to work at? ▼
Based on OSHA records, Restech Plastic Molding, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 20 violations across 5 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Restech Plastic Molding, LLC have? ▼
Restech Plastic Molding, LLC has 20 OSHA violations on record, including 17 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $21,777.
How many OSHA inspections has Restech Plastic Molding, LLC had? ▼
Restech Plastic Molding, LLC has had 5 OSHA inspections, with the first recorded on 2013-05-17 and the most recent on 2022-10-31. This averages 4.0 violations per inspection.
What is the total penalty amount for Restech Plastic Molding, LLC? ▼
Restech Plastic Molding, LLC has been assessed $21,777 in current OSHA penalties, reduced from an initial assessment of $70,476 (a 69.1% reduction).
Does Restech Plastic Molding, LLC have any serious or willful violations? ▼
Yes. Restech Plastic Molding, LLC has 17 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Restech Plastic Molding, LLC operate in? ▼
Restech Plastic Molding, LLC operates in the Manufacturing sector (NAICS code 326199). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Restech Plastic Molding, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Restech Plastic Molding, LLC ranks #15,871 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Restech Plastic Molding, LLC's safety record compare to industry average? ▼
Restech Plastic Molding, LLC's total OSHA penalty of $21,777 is above the Manufacturing industry average of $15,763 per employer (1.4x the average). The employer has 5 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Mueller CO. LLC in Albertville, AL is a similar manufacturing employer with $21,782 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 5 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.