PlainWorker
Employers › WI

Manufacturing · Milwaukee, WI

Regent Die & Tool Company, INC.

According to OSHA enforcement records (2010–2026), Regent Die & Tool Company, INC. ranks #22,083 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 16 violations across 3 inspections.

Top 25% by penalty81% serious
$16,220
OSHA penalties
16
Violations cited
3
OSHA inspections
#22,083
of 99,447 penalized employers

Regent Die & Tool Company, INC. in Milwaukee, WI has been the subject of 3 OSHA workplace inspections and 16 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $16,220. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Regent Die & Tool Company, INC. 3 times over 6 years, roughly once every couple of years. These inspections resulted in 16 violations, averaging 5.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #22,083 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 13 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Otr Engineered Solutions, INC. in Jacksonville, FL is another manufacturing employer with 3 OSHA inspections on record and $16,220 in current penalties.

5.3
violations per inspection
81.3%
of violations were serious
#22,083
of 99,447 penalized employers

Compliance score

F 12/100
  • F OSHA safety compliance: 16 violations across 3 OSHA inspections (5.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Regent Die & Tool Company, INC. sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$16,220 Bottom 22% least affordable more affordable than 22% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Regent Die & Tool Company, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.04.413.22230.839.6OSHA inspectionsViolations citedMORTEX PRODUCTS, INC., OSHA inspections: 3 · Violations cited: 11ABC COKE-DIVISION OF…, OSHA inspections: 3 · Violations cited: 34EATON CORPORATION, OSHA inspections: 3 · Violations cited: 38ALKON CORPORATION, OSHA inspections: 3 · Violations cited: 14TROJAN BATTERY COMPA…, OSHA inspections: 3 · Violations cited: 14TATE & LYLE INGREDIE…, OSHA inspections: 3 · Violations cited: 9U.S. ZINC CORPORATION, OSHA inspections: 3 · Violations cited: 9RAFFIELD FISHERIES, …, OSHA inspections: 3 · Violations cited: 26SOLARIS PAPER INC, OSHA inspections: 3 · Violations cited: 6PENNAKEM LLC, OSHA inspections: 3 · Violations cited: 17MARQUEZ BROTHERS INT…, OSHA inspections: 3 · Violations cited: 20JOHNS MANVILLE, INC., OSHA inspections: 3 · Violations cited: 14FECON, INC., OSHA inspections: 3 · Violations cited: 11HANDI-FOIL CORP., OSHA inspections: 3 · Violations cited: 8TENNESSEE BUSINESS F…, OSHA inspections: 3 · Violations cited: 6OMYA INC., OSHA inspections: 3 · Violations cited: 6COLUMBUS MARBLE WORK…, OSHA inspections: 3 · Violations cited: 23LITE METALS COMPANY, OSHA inspections: 3 · Violations cited: 8CAB INCORPORATED, OSHA inspections: 3 · Violations cited: 7BETTENDORF STANFORD …, OSHA inspections: 3 · Violations cited: 8Regent Die & Tool Co…, OSHA inspections: 3 · Violations cited: 16
Regent Die & Tool Company, INC. has 3 OSHA inspections on record and 16 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Regent Die & Tool Company, INC. in the Manufacturing enforcement ledger

In Manufacturing, Regent Die & Tool Company, INC. sits at penalty rank #10,514 of 35,243 penalized establishments ($16,220 assessed).

How Regent Die & Tool Company, INC. Compares

Regent Die & Tool Company, INC.'s 5.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-06-07

Last Inspection

2018-04-19

Inspection Span

6 yrs

Violations / Inspection

5.3

Avg Penalty / Inspection

$5,407

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 6 years, averaging 5.3 violations per visit. That's $5,407 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

13

Serious

81.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

18.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$40,700

Current Penalty Amount

$16,220

Penalty Reduction

60.1%

What this shows Penalties were reduced by $24,480 from the initial assessment of $40,700. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Regent Die & Tool Company, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Regent Die & Tool Company, INC. Industry Avg
Inspections 3 2.6
Violations 16 8.0
Total Penalty $16,220 $15,763
Avg Penalty per Inspection $5,407 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Regent Die & Tool Company, INC., both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($16,220 here).

Otr Engineered Solutions, INC. $16,220 FL Organic Recycling, INC. $16,220 NY Trulite Glass and Aluminum Solutions $16,220 FL Gates Corporation $16,219 IA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Mortex Products, INC. 3 insp. Fort Worth, TX Abc Coke-Division of Drummond Company 3 insp. Tarrant, AL Eaton Corporation 3 insp. Horseheads, NY Alkon Corporation 3 insp. Fremont, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Otr Engineered Solutions, INC.
Jacksonville, FL
3 inspections $16,220
Organic Recycling, INC.
Orangeburg, NY
2 inspections $16,220
Trulite Glass and Aluminum Solutions
Bradenton, FL
2 inspections $16,220
Gates Corporation
Newton, IA
2 inspections $16,219
D & D Packaging, INC.
Olive Branch, MS
3 inspections $16,222

Compare Regent Die & Tool Company, INC. vs Otr Engineered Solutions, INC. side-by-side →

What to do with this record

Use Regent Die & Tool Company, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Regent Die & Tool Company, INC. against Otr Engineered Solutions, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Regent Die & Tool Company, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Regent Die & Tool Company, INC. safe to work at? ▼
Based on OSHA records, Regent Die & Tool Company, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 16 violations across 3 inspections, including 13 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Regent Die & Tool Company, INC. have? ▼
Regent Die & Tool Company, INC. has 16 OSHA violations on record, including 13 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $16,220.
How many OSHA inspections has Regent Die & Tool Company, INC. had? ▼
Regent Die & Tool Company, INC. has had 3 OSHA inspections, with the first recorded on 2012-06-07 and the most recent on 2018-04-19. This averages 5.3 violations per inspection.
What is the total penalty amount for Regent Die & Tool Company, INC.? ▼
Regent Die & Tool Company, INC. has been assessed $16,220 in current OSHA penalties, reduced from an initial assessment of $40,700 (a 60.1% reduction).
Does Regent Die & Tool Company, INC. have any serious or willful violations? ▼
Yes. Regent Die & Tool Company, INC. has 13 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Regent Die & Tool Company, INC. operate in? ▼
Regent Die & Tool Company, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Regent Die & Tool Company, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Regent Die & Tool Company, INC. ranks #22,083 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Regent Die & Tool Company, INC.'s safety record compare to industry average? ▼
Regent Die & Tool Company, INC.'s total OSHA penalty of $16,220 is above the Manufacturing industry average of $15,763 per employer (1.0x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Otr Engineered Solutions, INC. in Jacksonville, FL is a similar manufacturing employer with $16,220 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.