Manufacturing · El Segundo, CA

Raytheon Space and Airborne Systems

According to OSHA enforcement records (2010–2026), Raytheon Space and Airborne Systems has a relatively clean safety record: 0 violations across 2 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
2
OSHA inspections

Raytheon Space and Airborne Systems in El Segundo, CA has been the subject of 2 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Raytheon Space and Airborne Systems 2 times over 1 year - more than twice a year on average. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Easco Hand Tools, INC. DBA Danaher Tool Group in Gastonia, NC is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 2 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Raytheon Space and Airborne Systems.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0019.438.958.377.7OSHA inspectionsViolations citedKRISPY KREME DOUGHNU…, OSHA inspections: 2 · Violations cited: 16HORN PACKAGING CORPO…, OSHA inspections: 2 · Violations cited: 21METAL CULVERTS, INC., OSHA inspections: 2 · Violations cited: 9MAVERICK ARMS INC., OSHA inspections: 2 · Violations cited: 27HAILO WIND SYSTEMS, …, OSHA inspections: 2 · Violations cited: 15UNITEX BAG, INC., OSHA inspections: 2 · Violations cited: 74BAKER MANUFACTURING …, OSHA inspections: 2 · Violations cited: 14CLEVELAND TRACK MATE…, OSHA inspections: 2 · Violations cited: 8PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 5FLORIKAN ESA, LLC, OSHA inspections: 2 · Violations cited: 27STEWART SYSTEMS BAKI…, OSHA inspections: 2 · Violations cited: 10US COSMETICS CORPORA…, OSHA inspections: 2 · Violations cited: 33CHEP SERVICES, LLC, OSHA inspections: 2 · Violations cited: 4JOE N. MILES & SONS,…, OSHA inspections: 2 · Violations cited: 26CULPEPER FARMERS' CO…, OSHA inspections: 2 · Violations cited: 8ENSIGHT SOLUTIONS LLC, OSHA inspections: 2 · Violations cited: 12BARDANE MFG. CO., OSHA inspections: 2 · Violations cited: 15LEONI WIRE, INC., OSHA inspections: 2 · Violations cited: 6FLOW TURN, INC., OSHA inspections: 2 · Violations cited: 3BLAIR CEDAR & NOVELT…, OSHA inspections: 2 · Violations cited: 10Raytheon Space and A…, OSHA inspections: 2 · Violations cited: 0
Raytheon Space and Airborne Systems has 2 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Raytheon Space and Airborne Systems Compares

2 OSHA inspections on record for Raytheon Space and Airborne Systems in El Segundo, CA, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Raytheon Space and Airborne Systems to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-12-07

Last Inspection

2014-02-21

Inspection Span

1 yr

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Industry Safety Context: Manufacturing

How Raytheon Space and Airborne Systems compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Raytheon Space and Airborne Systems Industry Avg
Inspections 2 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Raytheon Space and Airborne Systems, both outside CA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Raytheon Space and Airborne Systems vs Jeld-Wen, INC. side-by-side →

What to do with this record

Use Raytheon Space and Airborne Systems's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Raytheon Space and Airborne Systems against Jeld-Wen, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Raytheon Space and Airborne Systems's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Raytheon Space and Airborne Systems safe to work at?
Based on OSHA records, Raytheon Space and Airborne Systems's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 2 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Raytheon Space and Airborne Systems have?
Raytheon Space and Airborne Systems has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Raytheon Space and Airborne Systems had?
Raytheon Space and Airborne Systems has had 2 OSHA inspections, with the first recorded on 2012-12-07 and the most recent on 2014-02-21. This averages 0.0 violations per inspection.
What is the total penalty amount for Raytheon Space and Airborne Systems?
Raytheon Space and Airborne Systems has been assessed $0 in current OSHA penalties.
What industry does Raytheon Space and Airborne Systems operate in?
Raytheon Space and Airborne Systems operates in the Manufacturing sector (NAICS code 334511). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Raytheon Space and Airborne Systems's safety record compare to industry average?
Raytheon Space and Airborne Systems's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Easco Hand Tools, INC. DBA Danaher Tool Group in Gastonia, NC is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.