Construction · Memphis, TN

Ralph Jones Sheet Metal, INC.

According to OSHA enforcement records (2010–2026), Ralph Jones Sheet Metal, INC. ranks #82,877 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 2 inspections.

Lower half by penalty40% serious
$1,350
OSHA penalties
5
Violations cited
2
OSHA inspections
#82,877
of 99,447 penalized employers

Ralph Jones Sheet Metal, INC. in Memphis, TN has been the subject of 2 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,350. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Ralph Jones Sheet Metal, INC. 2 times over 2 years, roughly annually. These inspections resulted in 5 violations, averaging 2.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #82,877 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Evergreen Development NV LLC in Plymouth, MI is another construction employer with 2 OSHA inspections on record and $1,350 in current penalties.

2.5
violations per inspection
40.0%
of violations were serious
#82,877
of 99,447 penalized employers

Compliance score

D 54/100
  • D OSHA safety compliance: 5 violations across 2 OSHA inspections (2.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Ralph Jones Sheet Metal, INC. compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows Ralph Jones Sheet Metal, INC. runs well below peers (0.20x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,350 Top 17% most affordable more affordable than 83% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Ralph Jones Sheet Metal, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.007.915.823.631.5OSHA inspectionsViolations citedWEST COAST DRYWALL &…, OSHA inspections: 2 · Violations cited: 0ROAD CONTRACTOR CORP…, OSHA inspections: 2 · Violations cited: 4RUB & DAN CONSTRUCTI…, OSHA inspections: 2 · Violations cited: 30BC STUCCO AND STONE, OSHA inspections: 2 · Violations cited: 10EVERARDO "JUAN" SERVIN, OSHA inspections: 2 · Violations cited: 9LOVELL CONSTRUCTION …, OSHA inspections: 2 · Violations cited: 5FRAMING CONSTRUCTION…, OSHA inspections: 2 · Violations cited: 3SOUTH COAST SPECIALT…, OSHA inspections: 2 · Violations cited: 18JH CONSTRUCTION, OSHA inspections: 2 · Violations cited: 9SEAWAY PAINTING LLC, OSHA inspections: 2 · Violations cited: 13SIC SERVICES LLC, OSHA inspections: 2 · Violations cited: 5DFW FRAMING & CONSTR…, OSHA inspections: 2 · Violations cited: 3RANDY J. SMITH CONST…, OSHA inspections: 2 · Violations cited: 8SCHUFF STEEL COMPANY, OSHA inspections: 2 · Violations cited: 3MANUEL PINTO RODRIGU…, OSHA inspections: 2 · Violations cited: 11BROTHERS ROOFING & C…, OSHA inspections: 2 · Violations cited: 18FUERZA PILAR CORPORA…, OSHA inspections: 2 · Violations cited: 12TE CONSTRUCTION, LLC, OSHA inspections: 2 · Violations cited: 6FORTINA HERNANDEZ BA…, OSHA inspections: 2 · Violations cited: 5GULF STATES PROTECTI…, OSHA inspections: 2 · Violations cited: 8Ralph Jones Sheet Me…, OSHA inspections: 2 · Violations cited: 5
Ralph Jones Sheet Metal, INC. has 2 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Ralph Jones Sheet Metal, INC. in the Construction enforcement ledger

Construction sector: Ralph Jones Sheet Metal, INC. is the #27,200 heaviest OSHA penalty carrier of 33,222 employers with nonzero fines ($1,350).

How Ralph Jones Sheet Metal, INC. Compares

Ralph Jones Sheet Metal, INC.'s 2.50 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs well below peers (0.20x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-11-10

Last Inspection

2016-10-26

Inspection Span

2 yrs

Violations / Inspection

2.5

Avg Penalty / Inspection

$675

Industry Avg / Inspection

$3,361

What this shows 2 inspections over 2 years, averaging 2.5 violations per visit. That's $675 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

2

Serious

40.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

60.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,050

Current Penalty Amount

$1,350

Penalty Reduction

34.1%

What this shows Penalties were reduced by $700 from the initial assessment of $2,050. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Construction

How Ralph Jones Sheet Metal, INC. compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric Ralph Jones Sheet Metal, INC. Industry Avg
Inspections 2 2.0
Violations 5 3.3
Total Penalty $1,350 $6,767
Avg Penalty per Inspection $675 $3,361

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for Ralph Jones Sheet Metal, INC., both outside TN so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

Compare Ralph Jones Sheet Metal, INC. vs John Mourier Construction, INC. side-by-side →

What to do with this record

Use Ralph Jones Sheet Metal, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Ralph Jones Sheet Metal, INC. against John Mourier Construction, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Ralph Jones Sheet Metal, INC.'s inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Ralph Jones Sheet Metal, INC. safe to work at?
Based on OSHA records, Ralph Jones Sheet Metal, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 2 inspections, including 2 serious violations. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Ralph Jones Sheet Metal, INC. have?
Ralph Jones Sheet Metal, INC. has 5 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,350.
How many OSHA inspections has Ralph Jones Sheet Metal, INC. had?
Ralph Jones Sheet Metal, INC. has had 2 OSHA inspections, with the first recorded on 2014-11-10 and the most recent on 2016-10-26. This averages 2.5 violations per inspection.
What is the total penalty amount for Ralph Jones Sheet Metal, INC.?
Ralph Jones Sheet Metal, INC. has been assessed $1,350 in current OSHA penalties, reduced from an initial assessment of $2,050 (a 34.1% reduction).
Does Ralph Jones Sheet Metal, INC. have any serious or willful violations?
Yes. Ralph Jones Sheet Metal, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Ralph Jones Sheet Metal, INC. operate in?
Ralph Jones Sheet Metal, INC. operates in the Construction sector (NAICS code 238170). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
Where does Ralph Jones Sheet Metal, INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Ralph Jones Sheet Metal, INC. ranks #82,877 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Ralph Jones Sheet Metal, INC.'s safety record compare to industry average?
Ralph Jones Sheet Metal, INC.'s total OSHA penalty of $1,350 is below the Construction industry average of $6,767 per employer. The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Evergreen Development NV LLC in Plymouth, MI is a similar construction employer with $1,350 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.