Manufacturing · Euless, TX

Quick-Way Manufacturing

According to OSHA enforcement records (2010–2026), Quick-Way Manufacturing ranks #47,524 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Upper half by penalty100% serious
$6,563
OSHA penalties
2
Violations cited
2
OSHA inspections
#47,524
of 99,447 penalized employers

Quick-Way Manufacturing in Euless, TX has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,563. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Quick-Way Manufacturing 2 times over 1 year - more than twice a year on average. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #47,524 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Kraft Heinz Company in Kendallville, IN is another manufacturing employer with 4 OSHA inspections on record and $6,563 in current penalties.

1.0
violations per inspection
100.0%
of violations were serious
#47,524
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Quick-Way Manufacturing compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Quick-Way Manufacturing runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,563 Bottom 48% least affordable more affordable than 48% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Quick-Way Manufacturing.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0017.635.152.770.3OSHA inspectionsViolations citedNAKANISHI MANUFACTUR…, OSHA inspections: 2 · Violations cited: 23WILMINGTON FIBRE SPE…, OSHA inspections: 2 · Violations cited: 24KD ACQUISITION I, LL…, OSHA inspections: 2 · Violations cited: 11MERIDIAN MANUFACTURI…, OSHA inspections: 2 · Violations cited: 67DOWNEY METAL PRODUCT…, OSHA inspections: 2 · Violations cited: 21ALQUIST 3D, LLC, OSHA inspections: 2 · Violations cited: 6O'NEAL MANUFACTURING…, OSHA inspections: 2 · Violations cited: 6RONPAK INC, OSHA inspections: 2 · Violations cited: 9DART CONTAINER CORPO…, OSHA inspections: 2 · Violations cited: 5POTOMAC ARCHITECTURA…, OSHA inspections: 2 · Violations cited: 11MICHAEL DAWKINS GROU…, OSHA inspections: 2 · Violations cited: 24STURM, RUGER & COMPA…, OSHA inspections: 2 · Violations cited: 21MOUNTAIN CITY MEAT C…, OSHA inspections: 2 · Violations cited: 14TRI-STATE LUMBER & L…, OSHA inspections: 2 · Violations cited: 4BOCAR US, INC., OSHA inspections: 2 · Violations cited: 13ADVANCED FIBER, LLC, OSHA inspections: 2 · Violations cited: 9CUSTOM MOBILE EQUIPM…, OSHA inspections: 2 · Violations cited: 9C.J. FOODS, INC., OSHA inspections: 2 · Violations cited: 7CAJUN SUGAR COOPERAT…, OSHA inspections: 2 · Violations cited: 7TREEHOUSE FOODS, INC., OSHA inspections: 2 · Violations cited: 5Quick-Way Manufactur…, OSHA inspections: 2 · Violations cited: 2
Quick-Way Manufacturing has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Quick-Way Manufacturing in the Manufacturing enforcement ledger

In Manufacturing, Quick-Way Manufacturing sits at penalty rank #20,471 of 35,243 penalized establishments ($6,563 assessed).

How Quick-Way Manufacturing Compares

Quick-Way Manufacturing's 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2023-07-24

Last Inspection

2023-07-24

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$3,282

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 1.0 violations per visit. That's $3,282 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$10,938

Current Penalty Amount

$6,563

Penalty Reduction

40.0%

What this shows Penalties were reduced by $4,375 from the initial assessment of $10,938. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Quick-Way Manufacturing compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Quick-Way Manufacturing Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $6,563 $15,763
Avg Penalty per Inspection $3,282 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Quick-Way Manufacturing, both outside TX so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Quick-Way Manufacturing vs Steffani Metals, INC. side-by-side →

What to do with this record

Use Quick-Way Manufacturing's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Quick-Way Manufacturing against Steffani Metals, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Quick-Way Manufacturing's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Quick-Way Manufacturing safe to work at?
Based on OSHA records, Quick-Way Manufacturing's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Quick-Way Manufacturing have?
Quick-Way Manufacturing has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,563.
How many OSHA inspections has Quick-Way Manufacturing had?
Quick-Way Manufacturing has had 2 OSHA inspections, with the first recorded on 2023-07-24 and the most recent on 2023-07-24. This averages 1.0 violations per inspection.
What is the total penalty amount for Quick-Way Manufacturing?
Quick-Way Manufacturing has been assessed $6,563 in current OSHA penalties, reduced from an initial assessment of $10,938 (a 40.0% reduction).
Does Quick-Way Manufacturing have any serious or willful violations?
Yes. Quick-Way Manufacturing has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Quick-Way Manufacturing operate in?
Quick-Way Manufacturing operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Quick-Way Manufacturing rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Quick-Way Manufacturing ranks #47,524 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Quick-Way Manufacturing's safety record compare to industry average?
Quick-Way Manufacturing's total OSHA penalty of $6,563 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Kraft Heinz Company in Kendallville, IN is a similar manufacturing employer with $6,563 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.