PlainWorker
Employers › NY

Manufacturing · Lancaster, NY

Pro Tech Precision, LLC

According to OSHA enforcement records (2010–2026), Pro Tech Precision, LLC ranks #69,493 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Lower half by penalty75% serious
$2,837
OSHA penalties
4
Violations cited
2
OSHA inspections
#69,493
of 99,447 penalized employers

Pro Tech Precision, LLC in Lancaster, NY has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,837. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Pro Tech Precision, LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #69,493 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Las Palomas Bakery in Reno, NV is another manufacturing employer with 2 OSHA inspections on record and $2,838 in current penalties.

2.0
violations per inspection
75.0%
of violations were serious
#69,493
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Pro Tech Precision, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Pro Tech Precision, LLC runs well below peers (0.18x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,837 Top 30% most affordable more affordable than 70% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Pro Tech Precision, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.59.517.525.533.5OSHA inspectionsViolations citedDANZER VENEER AMERIC…, OSHA inspections: 2 · Violations cited: 22DIXON TICONDEROGA CO…, OSHA inspections: 2 · Violations cited: 10THE QUALITY CASTINGS…, OSHA inspections: 2 · Violations cited: 4DRAGON PRODUCTS, LTD, OSHA inspections: 2 · Violations cited: 11FLAMBEAU, INC., OSHA inspections: 2 · Violations cited: 3Janco Composites, Inc., OSHA inspections: 2 · Violations cited: 4MULTI-CAST CORPORATION, OSHA inspections: 2 · Violations cited: 13CVC SPECIALTY CHEMIC…, OSHA inspections: 2 · Violations cited: 32FABCO EQUIPMENT CO.,…, OSHA inspections: 2 · Violations cited: 23REG GEISMAR, LLC, OSHA inspections: 2 · Violations cited: 9CKKM INC, OSHA inspections: 2 · Violations cited: 30LAKE CABLE, LLC, OSHA inspections: 2 · Violations cited: 11SIMCOE WOOD PRODUCTS…, OSHA inspections: 2 · Violations cited: 9ROCK WOOL MANUFACTUR…, OSHA inspections: 2 · Violations cited: 15PENGUIN NATURAL FOOD…, OSHA inspections: 2 · Violations cited: 7FLOWERS FOODS, INC., OSHA inspections: 2 · Violations cited: 4THE DUC-PAC CORPORAT…, OSHA inspections: 2 · Violations cited: 8PRIME WOODCRAFT, INC., OSHA inspections: 2 · Violations cited: 11WATCO COMPANIES, LLC, OSHA inspections: 2 · Violations cited: 9ELLIOTT MACHINE SHOP…, OSHA inspections: 2 · Violations cited: 6Pro Tech Precision, …, OSHA inspections: 2 · Violations cited: 4
Pro Tech Precision, LLC has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Pro Tech Precision, LLC in the Manufacturing enforcement ledger

In Manufacturing, Pro Tech Precision, LLC sits at penalty rank #27,703 of 35,243 penalized establishments ($2,837 assessed).

How Pro Tech Precision, LLC Compares

Pro Tech Precision, LLC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.18x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2025-02-12

Last Inspection

2025-09-11

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$1,419

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.0 violations per visit. That's $1,419 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,783

Current Penalty Amount

$2,837

Penalty Reduction

25.0%

What this shows Penalties were reduced by $946 from the initial assessment of $3,783. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Pro Tech Precision, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Pro Tech Precision, LLC Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $2,837 $15,763
Avg Penalty per Inspection $1,419 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Pro Tech Precision, LLC, both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,837 here).

Cooks Wholesale Foods, INC. $2,837 PA Quality Plastics, INC. $2,837 NV Precision Tops, LLC $2,837 ND Las Palomas Bakery $2,838 NV

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Danzer Veneer Americas, INC 2 insp. Williamsport, PA Dixon Ticonderoga Company 2 insp. Neenah, WI The Quality Castings Company 2 insp. Orrville, OH Dragon Products, LTD 2 insp. LA Porte, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Cooks Wholesale Foods, INC.
Old Forge, PA
2 inspections $2,837
Quality Plastics, INC.
Sparks, NV
3 inspections $2,837
Precision Tops, LLC
Bismarck, ND
2 inspections $2,837
Triforest
Irvine, CA
0 inspections $0
Las Palomas Bakery
Reno, NV
2 inspections $2,838

Compare Pro Tech Precision, LLC vs Cooks Wholesale Foods, INC. side-by-side →

What to do with this record

Use Pro Tech Precision, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Pro Tech Precision, LLC against Cooks Wholesale Foods, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Pro Tech Precision, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Pro Tech Precision, LLC safe to work at? ▼
Based on OSHA records, Pro Tech Precision, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Pro Tech Precision, LLC have? ▼
Pro Tech Precision, LLC has 4 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,837.
How many OSHA inspections has Pro Tech Precision, LLC had? ▼
Pro Tech Precision, LLC has had 2 OSHA inspections, with the first recorded on 2025-02-12 and the most recent on 2025-09-11. This averages 2.0 violations per inspection.
What is the total penalty amount for Pro Tech Precision, LLC? ▼
Pro Tech Precision, LLC has been assessed $2,837 in current OSHA penalties, reduced from an initial assessment of $3,783 (a 25.0% reduction).
Does Pro Tech Precision, LLC have any serious or willful violations? ▼
Yes. Pro Tech Precision, LLC has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Pro Tech Precision, LLC operate in? ▼
Pro Tech Precision, LLC operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Pro Tech Precision, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Pro Tech Precision, LLC ranks #69,493 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Pro Tech Precision, LLC's safety record compare to industry average? ▼
Pro Tech Precision, LLC's total OSHA penalty of $2,837 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Las Palomas Bakery in Reno, NV is a similar manufacturing employer with $2,838 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.