PlainWorker
Employers › AL

Manufacturing · Gadsden, AL

Prince Metal Stamping USA, INC.

According to OSHA enforcement records (2010–2026), Prince Metal Stamping USA, INC. ranks #16,778 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 6 violations across 3 inspections.

Top 25% by penalty67% serious
$20,777
OSHA penalties
6
Violations cited
3
OSHA inspections
#16,778
of 99,447 penalized employers

Prince Metal Stamping USA, INC. in Gadsden, AL has been the subject of 3 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $20,777. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Prince Metal Stamping USA, INC. 3 times across a longer 11-year span, an infrequent cadence. These inspections resulted in 6 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #16,778 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Glen Oak Lumber & Milling, INC. in Montello, WI is another manufacturing employer with 2 OSHA inspections on record and $20,772 in current penalties.

2.0
violations per inspection
66.7%
of violations were serious
#16,778
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 6 violations across 3 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Prince Metal Stamping USA, INC. runs moderately above peers (1.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$20,777 Bottom 17% least affordable more affordable than 17% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Prince Metal Stamping USA, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.038.51419.525OSHA inspectionsViolations citedT & D METAL PRODUCTS…, OSHA inspections: 3 · Violations cited: 5CG ROXANE LLC, OSHA inspections: 3 · Violations cited: 6PILGRIM'S PRIDE, OSHA inspections: 3 · Violations cited: 8WELCO ACETYLENE CORP., OSHA inspections: 3 · Violations cited: 24RUIZ FOODS PRODUCT, …, OSHA inspections: 3 · Violations cited: 9RAS PROCESS EQUIPMEN…, OSHA inspections: 3 · Violations cited: 12NIBCO INC., OSHA inspections: 3 · Violations cited: 9IDEAL MANUFACTURING,…, OSHA inspections: 3 · Violations cited: 13DYNATECT LEAD SCREWS…, OSHA inspections: 3 · Violations cited: 18NORTHSTAR DIRECT, LLC, OSHA inspections: 3 · Violations cited: 21JOHN J. STEUBY COMPANY, OSHA inspections: 3 · Violations cited: 21OX PAPERBOARD ILLINO…, OSHA inspections: 3 · Violations cited: 4ENPROTECH INDUSTRIAL…, OSHA inspections: 3 · Violations cited: 10FORMED FIBER TECHNOL…, OSHA inspections: 3 · Violations cited: 8DAL-TILE DISTRIBUTIO…, OSHA inspections: 3 · Violations cited: 6ORGANIC MATTERS, INC., OSHA inspections: 3 · Violations cited: 21REFLEK MANUFACTURING…, OSHA inspections: 3 · Violations cited: 11FIC AMERICA CORP., OSHA inspections: 3 · Violations cited: 4UNARCO MATERIAL HAND…, OSHA inspections: 3 · Violations cited: 8COMMERCIAL METALS CO…, OSHA inspections: 3 · Violations cited: 5Prince Metal Stampin…, OSHA inspections: 3 · Violations cited: 6
Prince Metal Stamping USA, INC. has 3 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Prince Metal Stamping USA, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Prince Metal Stamping USA, INC. ranks #8,137 at $20,777 current penalty.

How Prince Metal Stamping USA, INC. Compares

Prince Metal Stamping USA, INC.'s 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2013-05-09

Last Inspection

2024-06-20

Inspection Span

11 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$6,926

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 11 years, averaging 2.0 violations per visit. That's $6,926 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$24,987

Current Penalty Amount

$20,777

Penalty Reduction

16.8%

What this shows Penalties were reduced by $4,210 from the initial assessment of $24,987. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Prince Metal Stamping USA, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Prince Metal Stamping USA, INC. Industry Avg
Inspections 3 2.6
Violations 6 8.0
Total Penalty $20,777 $15,763
Avg Penalty per Inspection $6,926 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Prince Metal Stamping USA, INC., both outside AL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($20,777 here).

Glen Oak Lumber & Milling, INC. $20,772 WI Butler Milling & Sales, LLC $20,770 MO Worldwide Steel Works, INC. $20,770 OK Metal Culverts, INC. $20,790 FL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

T & D Metal Products, LLC 3 insp. Watseka, IL CG Roxane LLC 3 insp. Olancha, CA Pilgrim's Pride 3 insp. Lufkin, TX Welco Acetylene CORP. 3 insp. Newark, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Glen Oak Lumber & Milling, INC.
Montello, WI
2 inspections $20,772
Butler Milling & Sales, LLC
Butler, MO
2 inspections $20,770
Worldwide Steel Works, INC.
Pryor, OK
3 inspections $20,770
Metal Culverts, INC.
Clearwater, FL
3 inspections $20,790
United States Stove Company
Bridgeport, AL
2 inspections $20,790

Compare Prince Metal Stamping USA, INC. vs Glen Oak Lumber & Milling, INC. side-by-side →

What to do with this record

Use Prince Metal Stamping USA, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Prince Metal Stamping USA, INC. against Glen Oak Lumber & Milling, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Prince Metal Stamping USA, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Prince Metal Stamping USA, INC. safe to work at? ▼
Based on OSHA records, Prince Metal Stamping USA, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 3 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Prince Metal Stamping USA, INC. have? ▼
Prince Metal Stamping USA, INC. has 6 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $20,777.
How many OSHA inspections has Prince Metal Stamping USA, INC. had? ▼
Prince Metal Stamping USA, INC. has had 3 OSHA inspections, with the first recorded on 2013-05-09 and the most recent on 2024-06-20. This averages 2.0 violations per inspection.
What is the total penalty amount for Prince Metal Stamping USA, INC.? ▼
Prince Metal Stamping USA, INC. has been assessed $20,777 in current OSHA penalties, reduced from an initial assessment of $24,987 (a 16.8% reduction).
Does Prince Metal Stamping USA, INC. have any serious or willful violations? ▼
Yes. Prince Metal Stamping USA, INC. has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Prince Metal Stamping USA, INC. operate in? ▼
Prince Metal Stamping USA, INC. operates in the Manufacturing sector (NAICS code 336370). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Prince Metal Stamping USA, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Prince Metal Stamping USA, INC. ranks #16,778 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Prince Metal Stamping USA, INC.'s safety record compare to industry average? ▼
Prince Metal Stamping USA, INC.'s total OSHA penalty of $20,777 is above the Manufacturing industry average of $15,763 per employer (1.3x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Glen Oak Lumber & Milling, INC. in Montello, WI is a similar manufacturing employer with $20,772 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.