PlainWorker
Employers › AL

Manufacturing · Montgomery, AL

Precision Metal Works, LLC

According to OSHA enforcement records (2010–2026), Precision Metal Works, LLC ranks #27,528 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 16 violations across 2 inspections.

Upper half by penalty94% serious
$13,114
OSHA penalties
16
Violations cited
2
OSHA inspections
#27,528
of 99,447 penalized employers

Precision Metal Works, LLC in Montgomery, AL has been the subject of 2 OSHA workplace inspections and 16 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $13,114. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Precision Metal Works, LLC 2 times over 2 years, roughly annually. These inspections resulted in 16 violations, averaging 8.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #27,528 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 15 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Engineered Wire Products, INC. in Warren, OH is another manufacturing employer with 2 OSHA inspections on record and $13,110 in current penalties.

8.0
violations per inspection
93.8%
of violations were serious
#27,528
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 16 violations across 2 OSHA inspections (8.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Precision Metal Works, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Precision Metal Works, LLC sits roughly in line with peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$13,114 Bottom 28% least affordable more affordable than 28% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Precision Metal Works, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.02.99.015.021.127.1OSHA inspectionsViolations citedBECTON DICKINSON & CO., OSHA inspections: 2 · Violations cited: 17GRANITE MASTERS, INC., OSHA inspections: 2 · Violations cited: 22FORT WORTH F&D HEAD …, OSHA inspections: 2 · Violations cited: 22LEXICON, INC., OSHA inspections: 2 · Violations cited: 19PRECISION TEXTILES I…, OSHA inspections: 2 · Violations cited: 4THE CARLSTAR GROUP LLC, OSHA inspections: 2 · Violations cited: 11SONIC COMPONENT SYST…, OSHA inspections: 2 · Violations cited: 17GENERAL SHEET METAL …, OSHA inspections: 2 · Violations cited: 4POHL MACHINING, INC., OSHA inspections: 2 · Violations cited: 15PETROLEUM EQUIPMENT …, OSHA inspections: 2 · Violations cited: 26LMC SLAB AND TILE, LLC, OSHA inspections: 2 · Violations cited: 13CURTISS WRIGHT TARGE…, OSHA inspections: 2 · Violations cited: 6SOLAR SEAL OF CONNEC…, OSHA inspections: 2 · Violations cited: 18CTS CORPORATION, OSHA inspections: 2 · Violations cited: 4READY FOODS, INC., OSHA inspections: 2 · Violations cited: 9ECON WELDING & FABRI…, OSHA inspections: 2 · Violations cited: 17BLACK LION PRODUCTS,…, OSHA inspections: 2 · Violations cited: 18CONTINENTAL AUTOMOTIVE, OSHA inspections: 2 · Violations cited: 6DONNER STEEL WORKS, OSHA inspections: 2 · Violations cited: 10MOBIS NORTH AMERICA, OSHA inspections: 2 · Violations cited: 6Precision Metal Work…, OSHA inspections: 2 · Violations cited: 16
Precision Metal Works, LLC has 2 OSHA inspections on record and 16 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Precision Metal Works, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Precision Metal Works, LLC ranks #12,814 at $13,114 current penalty.

How Precision Metal Works, LLC Compares

Precision Metal Works, LLC's 8.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2022-01-24

Last Inspection

2024-01-09

Inspection Span

2 yrs

Violations / Inspection

8.0

Avg Penalty / Inspection

$6,557

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 8.0 violations per visit. That's $6,557 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

15

Serious

93.8% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

6.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$21,589

Current Penalty Amount

$13,114

Penalty Reduction

39.3%

What this shows Penalties were reduced by $8,475 from the initial assessment of $21,589. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Precision Metal Works, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Precision Metal Works, LLC Industry Avg
Inspections 2 2.6
Violations 16 8.0
Total Penalty $13,114 $15,763
Avg Penalty per Inspection $6,557 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Precision Metal Works, LLC, both outside AL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($13,114 here).

Engineered Wire Products, INC. $13,110 OH Wico Metal Prod $13,110 MI Westendorf Manufacturing CO INC $13,118 IA Vigo Importing Company $13,119 FL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Becton Dickinson & CO. 2 insp. Holdrege, NE Granite Masters, INC. 2 insp. Suwanee, GA Fort Worth F&D Head Company 2 insp. Fort Worth, TX Lexicon, INC. 2 insp. Armorel, AR

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Engineered Wire Products, INC.
Warren, OH
2 inspections $13,110
Wico Metal Prod
Center Line, MI
4 inspections $13,110
Westendorf Manufacturing CO INC
Onawa, IA
2 inspections $13,118
Vigo Importing Company
Tampa, FL
2 inspections $13,119
Advanced Medical & Metals, LLC
Birmingham, AL
2 inspections $13,108

Compare Precision Metal Works, LLC vs Engineered Wire Products, INC. side-by-side →

What to do with this record

Use Precision Metal Works, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Precision Metal Works, LLC against Engineered Wire Products, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Precision Metal Works, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Precision Metal Works, LLC safe to work at? ▼
Based on OSHA records, Precision Metal Works, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 16 violations across 2 inspections, including 15 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Precision Metal Works, LLC have? ▼
Precision Metal Works, LLC has 16 OSHA violations on record, including 15 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $13,114.
How many OSHA inspections has Precision Metal Works, LLC had? ▼
Precision Metal Works, LLC has had 2 OSHA inspections, with the first recorded on 2022-01-24 and the most recent on 2024-01-09. This averages 8.0 violations per inspection.
What is the total penalty amount for Precision Metal Works, LLC? ▼
Precision Metal Works, LLC has been assessed $13,114 in current OSHA penalties, reduced from an initial assessment of $21,589 (a 39.3% reduction).
Does Precision Metal Works, LLC have any serious or willful violations? ▼
Yes. Precision Metal Works, LLC has 15 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Precision Metal Works, LLC operate in? ▼
Precision Metal Works, LLC operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Precision Metal Works, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Precision Metal Works, LLC ranks #27,528 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Precision Metal Works, LLC's safety record compare to industry average? ▼
Precision Metal Works, LLC's total OSHA penalty of $13,114 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Engineered Wire Products, INC. in Warren, OH is a similar manufacturing employer with $13,110 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.