PlainWorker
Employers › PA

Manufacturing · Ellwood City, PA

Precision Metal Products Company, INC.

According to OSHA enforcement records (2010–2026), Precision Metal Products Company, INC. ranks #13,581 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 18 violations across 3 inspections.

Top 25% by penalty94% serious
$24,780
OSHA penalties
18
Violations cited
3
OSHA inspections
#13,581
of 99,447 penalized employers

Precision Metal Products Company, INC. in Ellwood City, PA has been the subject of 3 OSHA workplace inspections and 18 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $24,780. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Precision Metal Products Company, INC. 3 times over 1 year - more than twice a year on average. These inspections resulted in 18 violations, averaging 6.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #13,581 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Coty US LLC in Sanford, NC is another manufacturing employer with 2 OSHA inspections on record and $24,780 in current penalties.

6.0
violations per inspection
94.4%
of violations were serious
#13,581
of 99,447 penalized employers

Compliance score

F 3/100
  • F OSHA safety compliance: 18 violations across 3 OSHA inspections (6.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Precision Metal Products Company, INC. runs moderately above peers (1.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$24,780 Bottom 14% least affordable more affordable than 14% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Precision Metal Products Company, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0013.627.340.954.5OSHA inspectionsViolations citedSUBURBAN PLASTICS CO., OSHA inspections: 3 · Violations cited: 15GREEN BAY PACKAGING, OSHA inspections: 3 · Violations cited: 10DRAKE EXTRUSION, INC., OSHA inspections: 3 · Violations cited: 23TYSON FOODS, INC., OSHA inspections: 3 · Violations cited: 9VERSA-PAK, LTD., OSHA inspections: 3 · Violations cited: 10GONNELLA BAKING CO., OSHA inspections: 3 · Violations cited: 5INTEGRA-CAST, INC., OSHA inspections: 3 · Violations cited: 21D & S WELDING, LLC, OSHA inspections: 3 · Violations cited: 18FLORIDA FLOATS, INC., OSHA inspections: 3 · Violations cited: 11CHICAGO AEROSOL, LLC, OSHA inspections: 3 · Violations cited: 6NEOKRAFT SIGNS, INC., OSHA inspections: 3 · Violations cited: 13WALLNER EXPAC, INC., OSHA inspections: 3 · Violations cited: 7MEGAWALL CORPORATION, OSHA inspections: 3 · Violations cited: 34ADVANCE INDUSTRIAL M…, OSHA inspections: 3 · Violations cited: 16SOUTHERN WILD GAME H…, OSHA inspections: 3 · Violations cited: 11JAMES SKINNER BAKING…, OSHA inspections: 3 · Violations cited: 6NORDYNE, OSHA inspections: 3 · Violations cited: 8LOFLIN HANDLE CO., INC, OSHA inspections: 3 · Violations cited: 52STRUCTURAL PRESTRESS…, OSHA inspections: 3 · Violations cited: 1BAE SYSTEMS, OSHA inspections: 3 · Violations cited: 1Precision Metal Prod…, OSHA inspections: 3 · Violations cited: 18
Precision Metal Products Company, INC. has 3 OSHA inspections on record and 18 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Precision Metal Products Company, INC. in the Manufacturing enforcement ledger

In Manufacturing, Precision Metal Products Company, INC. sits at penalty rank #6,641 of 35,243 penalized establishments ($24,780 assessed).

How Precision Metal Products Company, INC. Compares

Precision Metal Products Company, INC.'s 6.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2023-06-07

Last Inspection

2023-06-12

Inspection Span

1 yr

Violations / Inspection

6.0

Avg Penalty / Inspection

$8,260

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 6.0 violations per visit. That's $8,260 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

17

Serious

94.4% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

5.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$24,780

Current Penalty Amount

$24,780

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Precision Metal Products Company, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Precision Metal Products Company, INC. Industry Avg
Inspections 3 2.6
Violations 18 8.0
Total Penalty $24,780 $15,763
Avg Penalty per Inspection $8,260 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Precision Metal Products Company, INC., both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($24,780 here).

Douglas Holding LLC $24,780 NE Coty US LLC $24,780 NC Dallas Millwork, INC. $24,782 GA Coextruded Plastic Technologies, INC. $24,783 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Suburban Plastics CO. 3 insp. Elgin, IL Green Bay Packaging 3 insp. Lebanon, OH Drake Extrusion, INC. 3 insp. Ridgeway, VA Tyson Foods, INC. 3 insp. South Hutchinson, KS

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Douglas Holding LLC
Plainview, NE
2 inspections $24,780
Coty US LLC
Sanford, NC
2 inspections $24,780
Dallas Millwork, INC.
Hiram, GA
5 inspections $24,782
Coextruded Plastic Technologies, INC.
Janesville, WI
4 inspections $24,783
Metropolitan Woodwork, LLC
Springfield, NJ
2 inspections $24,787

Compare Precision Metal Products Company, INC. vs Douglas Holding LLC side-by-side →

What to do with this record

Use Precision Metal Products Company, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Precision Metal Products Company, INC. against Douglas Holding LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Precision Metal Products Company, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Precision Metal Products Company, INC. safe to work at? ▼
Based on OSHA records, Precision Metal Products Company, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 18 violations across 3 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Precision Metal Products Company, INC. have? ▼
Precision Metal Products Company, INC. has 18 OSHA violations on record, including 17 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $24,780.
How many OSHA inspections has Precision Metal Products Company, INC. had? ▼
Precision Metal Products Company, INC. has had 3 OSHA inspections, with the first recorded on 2023-06-07 and the most recent on 2023-06-12. This averages 6.0 violations per inspection.
What is the total penalty amount for Precision Metal Products Company, INC.? ▼
Precision Metal Products Company, INC. has been assessed $24,780 in current OSHA penalties.
Does Precision Metal Products Company, INC. have any serious or willful violations? ▼
Yes. Precision Metal Products Company, INC. has 17 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Precision Metal Products Company, INC. operate in? ▼
Precision Metal Products Company, INC. operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Precision Metal Products Company, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Precision Metal Products Company, INC. ranks #13,581 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Precision Metal Products Company, INC.'s safety record compare to industry average? ▼
Precision Metal Products Company, INC.'s total OSHA penalty of $24,780 is above the Manufacturing industry average of $15,763 per employer (1.6x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Coty US LLC in Sanford, NC is a similar manufacturing employer with $24,780 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.