PlainWorker
Employers › AK

Construction · Kodiak, AK

Precision Maintenance and Fabricating, INC.

According to OSHA enforcement records (2010–2026), Precision Maintenance and Fabricating, INC. ranks #70,806 of 99,447 penalized U.S. employers by total current penalty, with a average safety record: 3 violations across 2 inspections.

Lower half by penalty67% serious
$2,700
OSHA penalties
3
Violations cited
2
OSHA inspections
#70,806
of 99,447 penalized employers

Precision Maintenance and Fabricating, INC. in Kodiak, AK has been the subject of 2 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,700. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Precision Maintenance and Fabricating, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 3 violations, averaging 1.5 per inspection. According to OSHA enforcement records, its total current penalty ranks #70,806 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Pavilion Construction in Santa Fe, NM is another construction employer with 5 OSHA inspections on record and $2,700 in current penalties.

1.5
violations per inspection
66.7%
of violations were serious
#70,806
of 99,447 penalized employers

Compliance score

C 68/100
  • C OSHA safety compliance: 3 violations across 2 OSHA inspections (1.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows Precision Maintenance and Fabricating, INC. runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,700 Top 29% most affordable more affordable than 71% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Precision Maintenance and Fabricating, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.88.615.522.429.3OSHA inspectionsViolations citedWACLAW CILULKO DBA A…, OSHA inspections: 2 · Violations cited: 28ADRIAN CONSTRUCTION …, OSHA inspections: 2 · Violations cited: 3EMPIRE BUILDERS LLC, OSHA inspections: 2 · Violations cited: 6TURNER CONSTRUCTION …, OSHA inspections: 2 · Violations cited: 6NEWTRON BEAUMONT, L.…, OSHA inspections: 2 · Violations cited: 3ERICK AND CHRIS CONS…, OSHA inspections: 2 · Violations cited: 21LOLANDIZ CONSTRUCTIO…, OSHA inspections: 2 · Violations cited: 3BASNIGHT CONSTRUCTIO…, OSHA inspections: 2 · Violations cited: 12TOWNSHIP OF UPPER DE…, OSHA inspections: 2 · Violations cited: 14MF ROOFING INC., OSHA inspections: 2 · Violations cited: 6HAYWARD BAKER, INC., OSHA inspections: 2 · Violations cited: 7GAN CONTRACTOR, OSHA inspections: 2 · Violations cited: 4DIAZ PROFESSIONAL CO…, OSHA inspections: 2 · Violations cited: 4EARM CONSTRUCTION, I…, OSHA inspections: 2 · Violations cited: 4CHAMPION INDUSTRIAL …, OSHA inspections: 2 · Violations cited: 5JAYRO VIVAS, OSHA inspections: 2 · Violations cited: 6RUDY ARAGON, OSHA inspections: 2 · Violations cited: 15J&A CONSTRUCTION ENT…, OSHA inspections: 2 · Violations cited: 4ACE NATIONWIDE CONST…, OSHA inspections: 2 · Violations cited: 9DAVE SENECAL, OSHA inspections: 2 · Violations cited: 8Precision Maintenanc…, OSHA inspections: 2 · Violations cited: 3
Precision Maintenance and Fabricating, INC. has 2 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Precision Maintenance and Fabricating, INC. in the Construction enforcement ledger

Among 33,222 Construction employers with OSHA penalties on file, Precision Maintenance and Fabricating, INC. ranks #22,478 at $2,700 current penalty.

How Precision Maintenance and Fabricating, INC. Compares

Precision Maintenance and Fabricating, INC.'s 1.50 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2018-09-18

Last Inspection

2018-09-18

Inspection Span

1 yr

Violations / Inspection

1.5

Avg Penalty / Inspection

$1,350

Industry Avg / Inspection

$3,361

What this shows 2 inspections over 1 year, averaging 1.5 violations per visit. That's $1,350 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

2

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$6,282

Current Penalty Amount

$2,700

Penalty Reduction

57.0%

What this shows Penalties were reduced by $3,582 from the initial assessment of $6,282. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Construction

How Precision Maintenance and Fabricating, INC. compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric Precision Maintenance and Fabricating, INC. Industry Avg
Inspections 2 2.0
Violations 3 3.3
Total Penalty $2,700 $6,767
Avg Penalty per Inspection $1,350 $3,361
View all 61,260 employers in Construction →

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for Precision Maintenance and Fabricating, INC., both outside AK so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,700 here).

Garco Construction INC $2,700 WA Tobias Mendoza DBA Tobias Mendoza Siding $2,700 NC Lacaillade Masonry, INC. $2,700 VT JCM Northlink LLC $2,700 WA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Waclaw Cilulko DBA American Masonry & Supply, INC. 2 insp. Chicago, IL Adrian Construction Group LLC 2 insp. Ramsey, NJ Empire Builders LLC 2 insp. Minoa, NY Turner Construction Company 2 insp. Beverly Hills, CA

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

KKK Aluminum and Glass INC
Honolulu, HI
2 inspections $2,700
STH Construction LLC
Ramsey, NJ
2 inspections $2,700
Pavilion Construction
Santa Fe, NM
5 inspections $2,700
King Carpentry INC.
Ann Arbor, MI
3 inspections $2,700
Longhouse Development LLC
Honolulu, HI
2 inspections $2,700

Compare Precision Maintenance and Fabricating, INC. vs KKK Aluminum and Glass INC side-by-side →

What to do with this record

Use Precision Maintenance and Fabricating, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Precision Maintenance and Fabricating, INC. against KKK Aluminum and Glass INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Precision Maintenance and Fabricating, INC.'s inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Precision Maintenance and Fabricating, INC. safe to work at? ▼
Based on OSHA records, Precision Maintenance and Fabricating, INC.'s workplace safety record is average, with typical for this industry. The employer has 3 violations across 2 inspections, including 2 serious violations. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Precision Maintenance and Fabricating, INC. have? ▼
Precision Maintenance and Fabricating, INC. has 3 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,700.
How many OSHA inspections has Precision Maintenance and Fabricating, INC. had? ▼
Precision Maintenance and Fabricating, INC. has had 2 OSHA inspections, with the first recorded on 2018-09-18 and the most recent on 2018-09-18. This averages 1.5 violations per inspection.
What is the total penalty amount for Precision Maintenance and Fabricating, INC.? ▼
Precision Maintenance and Fabricating, INC. has been assessed $2,700 in current OSHA penalties, reduced from an initial assessment of $6,282 (a 57.0% reduction).
Does Precision Maintenance and Fabricating, INC. have any serious or willful violations? ▼
Yes. Precision Maintenance and Fabricating, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Precision Maintenance and Fabricating, INC. operate in? ▼
Precision Maintenance and Fabricating, INC. operates in the Construction sector (NAICS code 238110). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
Where does Precision Maintenance and Fabricating, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Precision Maintenance and Fabricating, INC. ranks #70,806 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Precision Maintenance and Fabricating, INC.'s safety record compare to industry average? ▼
Precision Maintenance and Fabricating, INC.'s total OSHA penalty of $2,700 is below the Construction industry average of $6,767 per employer. The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Pavilion Construction in Santa Fe, NM is a similar construction employer with $2,700 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.