PlainWorker
Employers › TN

Manufacturing · Gallatin, TN

Precision Castings of Tennessee, INC.

According to OSHA enforcement records (2010–2026), Precision Castings of Tennessee, INC. ranks #40,253 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 23 violations across 3 inspections.

Upper half by penalty70% serious
$8,375
OSHA penalties
23
Violations cited
3
OSHA inspections
#40,253
of 99,447 penalized employers

Precision Castings of Tennessee, INC. in Gallatin, TN has been the subject of 3 OSHA workplace inspections and 23 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,375. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Precision Castings of Tennessee, INC. 3 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 23 violations, averaging 7.7 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #40,253 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 16 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Specialty Ring Products, INC. in Bensalem, PA is another manufacturing employer with 4 OSHA inspections on record and $8,374 in current penalties.

7.7
violations per inspection
69.6%
of violations were serious
#40,253
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 23 violations across 3 OSHA inspections (7.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Precision Castings of Tennessee, INC. runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,375 Bottom 40% least affordable more affordable than 40% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Precision Castings of Tennessee, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.610.31825.733.4OSHA inspectionsViolations citedINTERNATIONAL PAPER …, OSHA inspections: 3 · Violations cited: 8AMERICAN NITRILE OPE…, OSHA inspections: 3 · Violations cited: 30QUEST SPECIALTY COAT…, OSHA inspections: 3 · Violations cited: 20SUMMIT SEALANTS, INC., OSHA inspections: 3 · Violations cited: 32MODERN MACHINE SHOP,…, OSHA inspections: 3 · Violations cited: 17TRAILER COMPONENT MF…, OSHA inspections: 3 · Violations cited: 15GOSHEN STAMPING, OSHA inspections: 3 · Violations cited: 17SKYLINE COMPOSITE, I…, OSHA inspections: 3 · Violations cited: 26WESTPORT AXLE CORP., OSHA inspections: 3 · Violations cited: 12ENDEAVOR ENERGY RESO…, OSHA inspections: 3 · Violations cited: 5REPUBLIC METALS INC, OSHA inspections: 3 · Violations cited: 30MATT INDUSTRIES, OSHA inspections: 3 · Violations cited: 8HERITAGE MECHANICAL …, OSHA inspections: 3 · Violations cited: 11INTERLECTRIC CORPORA…, OSHA inspections: 3 · Violations cited: 31VALLEY TRUCK PARTS INC, OSHA inspections: 3 · Violations cited: 13DICKSON FURNITURE MA…, OSHA inspections: 3 · Violations cited: 5SUNSHINE ELECTRONIC …, OSHA inspections: 3 · Violations cited: 8THE HARTLEY PRESS, I…, OSHA inspections: 3 · Violations cited: 14INTREPID MACHINE, INC., OSHA inspections: 3 · Violations cited: 10OASIS FOODS COMPANY, OSHA inspections: 3 · Violations cited: 4Precision Castings o…, OSHA inspections: 3 · Violations cited: 23
Precision Castings of Tennessee, INC. has 3 OSHA inspections on record and 23 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Precision Castings of Tennessee, INC. in the Manufacturing enforcement ledger

In Manufacturing, Precision Castings of Tennessee, INC. sits at penalty rank #17,793 of 35,243 penalized establishments ($8,375 assessed).

How Precision Castings of Tennessee, INC. Compares

Precision Castings of Tennessee, INC.'s 7.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2017-05-25

Last Inspection

2026-05-14

Inspection Span

9 yrs

Violations / Inspection

7.7

Avg Penalty / Inspection

$2,792

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 9 years, averaging 7.7 violations per visit. That's $2,792 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

16

Serious

69.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

7

Other-Than-Serious

30.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,375

Current Penalty Amount

$8,375

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Precision Castings of Tennessee, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Precision Castings of Tennessee, INC. Industry Avg
Inspections 3 2.6
Violations 23 8.0
Total Penalty $8,375 $15,763
Avg Penalty per Inspection $2,792 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Precision Castings of Tennessee, INC., both outside TN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($8,375 here).

Glidden Lumber $8,375 ME CMC of Georgia, INC. $8,376 GA Specialty Ring Products, INC. $8,374 PA Cargill Kitchen Solutions INC $8,372 IA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

International Paper Company 3 insp. Ticonderoga, NY American Nitrile Operations, LLC. 3 insp. Grove City, OH Quest Specialty Coatings, LLC 3 insp. Menomonee Falls, WI Summit Sealants, INC. 3 insp. Sedalia, CO

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Glidden Lumber
Parkman, ME
2 inspections $8,375
CMC of Georgia, INC.
Toccoa, GA
2 inspections $8,376
Specialty Ring Products, INC.
Bensalem, PA
4 inspections $8,374
N & S Mode
Los Angeles, CA
0 inspections $0
Cargill Kitchen Solutions INC
Mason City, IA
2 inspections $8,372

Compare Precision Castings of Tennessee, INC. vs Glidden Lumber side-by-side →

What to do with this record

Use Precision Castings of Tennessee, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Precision Castings of Tennessee, INC. against Glidden Lumber, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Precision Castings of Tennessee, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Precision Castings of Tennessee, INC. safe to work at? ▼
Based on OSHA records, Precision Castings of Tennessee, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 23 violations across 3 inspections, including 16 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Precision Castings of Tennessee, INC. have? ▼
Precision Castings of Tennessee, INC. has 23 OSHA violations on record, including 16 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $8,375.
How many OSHA inspections has Precision Castings of Tennessee, INC. had? ▼
Precision Castings of Tennessee, INC. has had 3 OSHA inspections, with the first recorded on 2017-05-25 and the most recent on 2026-05-14. This averages 7.7 violations per inspection.
What is the total penalty amount for Precision Castings of Tennessee, INC.? ▼
Precision Castings of Tennessee, INC. has been assessed $8,375 in current OSHA penalties.
Does Precision Castings of Tennessee, INC. have any serious or willful violations? ▼
Yes. Precision Castings of Tennessee, INC. has 16 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Precision Castings of Tennessee, INC. operate in? ▼
Precision Castings of Tennessee, INC. operates in the Manufacturing sector (NAICS code 331512). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Precision Castings of Tennessee, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Precision Castings of Tennessee, INC. ranks #40,253 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Precision Castings of Tennessee, INC.'s safety record compare to industry average? ▼
Precision Castings of Tennessee, INC.'s total OSHA penalty of $8,375 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Specialty Ring Products, INC. in Bensalem, PA is a similar manufacturing employer with $8,374 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.